CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Product Categories

  • Power Steering Pump Remover and Installer Kit

    Power Steering Pump Remover and Installer Kit

    $81.07

    Part No: 195CV

    Power Steering Pump Remover and Installer Kit

    $81.07

    This kit has nearly everything you need to remove and install power steering pump pulleys in Chrysler, Ford, and GM vehicles with Saginaw, Thompson, and Ford C111 and C2 power steering pumps.

    • Fits 1-1/8″, 1-1/4″, 1-5/16″, and 1-3/8″ pulley hub diameters including:
      • 1988 – newer GM cars equipped with Quad 4 engines
      • 1991 – 94 GM 3.1L V6
      • 1991 – newer 3800 V6 engines
      • 1994 – newer GM 3100 V6
      • 1999 – newer GM 3400 V6
      • 1992 – newer Ford Crown Victoria and Mercury Grand Marquis with 4.6 V8 engine
      • 1997 – newer Ford truck with 4.2 & 4.6 V6, 5.4 V8, and 6.8 V10 engines

    UPC: 047084001950
    Shipping Weight: 2.09lbs

    195 – Power Steering Pump Remover & Installer Kit Breakdown

    195 Power Steering Pump Pulley Flyer

    Quick View
  • 8 PC Air Blow Gun Set

    8 PC Air Blow Gun Set

    $80.59

    Part No: 40500CV

    8 PC Air Blow Gun Set

    $80.59

    This 8 pc air blow gun kit comes with 7 different application interchangeable tips designed to blow off work areas, used to dry off surfaces and easily inflates pool toy and balloons.

    • Ideal for cleaning debris from work area
    • Use to dry off wet surfaces
    • Easily inflate pool toys and balloons
    • 1/4″ NPT Female Threaded Air Inlet

    Specs:

    • Air gun body working air pressure 160PSI
    • Air gun body maximum air pressure 220PSI
    • Air consumption at 160PSI without tip 15.0 CFM
    • Working temp range -4 degrees to 185 degrees

    UPC: 047084405000
    Shipping weight: 1.05lbs

    40500 8 PC Air Blow Gun Kit Breakdown

    40500 8 Piece Air Blow Gun Set Flyer

    Quick View
  • MacPherson Strut Tool

    MacPherson Strut Tool

    $78.78

    Part No: 512

    MacPherson Strut Tool

    $78.78
    • Tool designed to be used on vehicles equipped with MacPherson Struts.
    • Allows user to quickly compress the coil spring to replace shock absorber, spring sets, repair bent strut or strut tube and repair damaged spindle.
    • Instructions and safety hooks included.
    • Not for use with impact tools.

    UPC: 047084005125
    Shipping Weight: 6.6lbs

    512 MacPherson Strut Spring Compressor Breakdown

    512 – MacPherson Strut Spring Compressor Instructions

    Also, available:
    513 Master MacPherson Strut Tool Set
    90200 Master Spring Compressor Set

    Quick View
  • 52 PC Torx Bit Master Set

    52 PC Torx Bit Master Set

    $78.77

    Part No: 934

    52 PC Torx Bit Master Set

    $78.77

    This ultimate Torx® collection includes Torx® bit sockets, Torx Plus® bits sockets, tamper-resistant Torx® bits, and Torx® socket for external bolts for use on most makes of cars and trucks, as well as many industrial, commercial, and DIY applications.

    • Set includes: Torx Bit Sockets, Torx Plus Bits Sockets, Tamper-Resistant Torx Bits, and Torx Socket for external bolts
    • Many uses from on most makes of cars and trucks
    • Bits made from S2 steel to meet or exceed torque specifications
    • Two-piece design more durable than a single-piece for long life
    • Torx Licensed

    Kit contains the following:

    Sockets:
    1/4″ DR TORX socket E4,E5, E6, E7, E8, 3/8″DR TORX socket E10
    3/8″ DR TORX socket E12, E14, E16
    1/2″ DR TORX socket E18, E20, E22, E24
    Torx Bit:
    1/4″ DR TORX Bit T6, T8 T10, T15, T20, T25, T27, T30
    3/8″ DR TORX Bit T40,T45, T47, T50, T55
    1/2″ DR TORX Bit T60, T70

    Tamperproof Torx Bit:
    1/4″ DR TORX Tamper Bit socket T8H, T10H, T15H, T20H, T25H, T27H, T30H 3/8″ DR TORX T40H, T45H, T50H, T55H
    1/2″ DR TORX Tamper Bit socket T60H

    Torx Plus Bit:
    1/4″ DR TORX Plus Bit socket 8TP, 10TP, 15TP, 20TP, 25TP, 27TP, 30TP
    3/8″ DR TORX Plus Bit socket 40TP, 45TP, 50TP, 55TP
    1/2″ DR TORX Plus Bit socket 60TP

    UPC: 047084009345
    Shipping Weight: 4.93lbs

    934 52 PC Master Torx Bit and Socket Set Breakdown

    934 52 PC Master Torx Bit and Socket Set Flyer

    Quick View
  • Antenna & Radio Socket Set

    Antenna & Radio Socket Set

    $78.75

    Part No: 142

    Antenna & Radio Socket Set

    $78.75
    • Eleven-piece kit in molded case.
    • Universal antenna wrench.
    • Ford radio removal tool.
    • Deep sockets to remove and install the tamper-proof radio nuts from many GM, Chrysler, and other aftermarket radios.
    • Antenna nut sockets that cover most import and domestic antenna nuts.

    UPC: 047084001424
    Shipping weight: 1.7lbs

    142 Antenna Radio Socket Set Breakdown

    Quick View
  • Toyota®/Lexus® Fuel Tank Lid Tool

    Toyota®/Lexus® Fuel Tank Lid Tool

    $78.57

    Part No: 25350CV

    Toyota®/Lexus® Fuel Tank Lid Tool

    $78.57

    This fuel tank lock ring tool is designed to remove and install the locking rings for fuel tank sending units on various Toyota® and Lexus® vehicles from 2004 and up.

    • 1/2″ DR. with 9 slot design
    • Applies to many Toyota® & Lexus® vehicles from 2004 and up
    • Tool fits firmly into the locking ring, eliminating the potential of damage to the ring, sending unit, or fuel lines
    • Designed to be used with a 1/2″ drive ratchet or 21mm socket or wrench
    • Do not use impact tool.
    • Applications:
      • Toyota® Applications (Model Year): Corolla (04-14), Land Cruiser (08-14), Matrix (04-14), Tacoma (05-14), and Yaris (07-11)
        Fuel Tank Locking Ring P/N’s: 77144-04010 and 7714-52040
      • Lexus® Applications: RX330 (04-06), RX350 (07-14), and RX450H (10-14)
        Fuel Tank Locking Ring P/N: 7714-48020

    UPC: 047084253502
    Shipping weight: 1.95lbs

    25350 Toyota Lexus Fuel Tank Lid Tool Flyer

    Quick View
  • Harmonic Balancer Installer

    Harmonic Balancer Installer

    $76.92

    Part No: 38800

    Harmonic Balancer Installer

    $76.92

    The Harmonic Balancer Installer is used to properly install harmonic balancers or drive pulleys that are pressed on one or two groove pulleys on the crankshaft.

    • Safely install most engine harmonic balancer and pulleys without damaging the balancers or crankshaft ends
    • Contains twelve thread adapters to fit more applications than other brands.
    • Metric and SAE bolts and adapters service most engines
    • Black oxide finish to resist rust
    • Sizes included: M10 x 1.5, M12 x 1.5, M12 x 1.75, M14 x 1.5, M14 x 2, M16 x 1.5, M16 x 2, 7/16 – 20, 1/2 – 20, 9/16 – 18, 5/8 – 18, 3/4 – 16
    • Match the crank bolt to the correct insert if needed.
    • Use with Cal Van 189 Harmonic Balancer Puller – Remover

    UPC: 047084388006
    Shipping weight: 3.55lbs

    38800 Application Chart

    38800 Harmonic Balancer Installer Flyer

    Also available:
    38500 – Master Harmonic Balancer & Pulley Installer
    38700 – Long Reach Harmonic Balancer and Pulley Installer
    38710 – Ford® EcoBoost Long Reach Harmonic Balancer Installer

    Quick View
  • Metric Bubble Flaring Tool

    Metric Bubble Flaring Tool

    $76.87

    Part No: 82700

    Metric Bubble Flaring Tool

    $76.87
    • Forms Bubble Flares in soft steel and copper tubing.
    • Flares metric Hydraulic brake lines used on Japanese, European, and domestic automobiles.
    • Works on 4.75mm, 6mm, 8mm, 10mm Tubing.
    • Makes Bubble Flares in one operation.

    UPC: 047084827000
    Shipping weight: 2.75lbs

    82700 Metric Bubble Flare Tool Kit Breakdown

    Also available:
    153 Metric Double Flaring Tool
    163 SAE Double Flaring Tool
    82800 SAE Tube Service Set
    82900 Double & Bubble Flaring Tool Set

    Quick View
  • 7 PC Oxygen Sensor Socket Set

    7 PC Oxygen Sensor Socket Set

    $75.82

    Part No: 842CV

    7 PC Oxygen Sensor Socket Set

    $75.82

    A comprehensive socket set that enables technicians to easily install or remove oxygen sensors, vacuum switches, and oil pressure sending units on a wide variety of domestic vehicles and imports.

    • Provides a method of removal and installation without damage to the sensor
    • This versatile set includes SAE and metric sockets for the most common applications
    • Includes:
      • 7/8″ – Vacuum Switch Socket
      • 7/8″ – Oxygen Sensor Socket Short
      • 7/8″ – Oxygen Sensor Socket Long
      • 1″ – Oil Pressure Sending Unit Socket
      • 1-1/16″ – Oil Pressure Sending Unit Socket
      • 27 mm – Oil Pressure Sending Unit Socket
      • 29 mm – Vacuum-Pressure Switch Socket

    UPC: 047084008423
    Shipping weight: 4.55lbs

    842 7 PC Oxygen Sensor Socket Flyer

    842 – 7 PC Oxygen Sensor Socket Set Replacement Parts

    Quick View
  • 6.7L Ford® Diesel Injector Socket Set

    6.7L Ford® Diesel Injector Socket Set

    $75.81

    Part No: 39650CV

    6.7L Ford® Diesel Injector Socket Set

    $75.81

    The Ford® Power Stroke 6.7L diesel injector sockets are designed to easily remove and install injectors. Both sockets come with a cutaway slot and taper on application end that allows for electrical connection clearance without damage.

    • Both sockets come with 3/8″ Female drive, 17mm and 12PT
    • Cutaway slot and tapered end in sockets allows for electrical connection clearance without damage
    • Internal design positions socket at proper injector height
    • Applications: 2011+ Ford® 6.7L diesel engines in F-Series Super Duty models F-250, F-350, and F-450

    UPC: 047084396506
    Shipping weight: .95lbs

    39650CV Breakdown

    39650 Ford 6.7L Diesel Injector Socket Set Flyer

    Quick View
  • Rapid Wire Strippers

    Rapid Wire Strippers

    $75.57

    Part No: 55210CV

    Rapid Wire Strippers

    $75.57

    The 55210 Rapid Wire Stripper, consistently create professional results every time, by piercing the wires insulation and removing it in one squeeze of the handles. Use with multiple automotive and home wiring ranging from 8-30AWG. The integrated wire cutter is capable of cutting up to 10 AWG wire.

    • Fits and Adjusts to a variety of wire sizes
    • Adjustable blade tension setting for insulation thickness and temperature variations
    • Hardened steel stripping blades and grooved steel clamping plates
    • Mechanical wire release for trouble-free operation
    • Rubberized grips on handle for comfort
    • Built-in wire cutter

    UPC: 047084552100
    Shipping weight: .75lbs

    55210 Wire Rapid Strippers Flyer

    Also available:
    55310 – Low Profile Wire Stripper

    Quick View
  • Brake Line Flaring Tool

    Brake Line Flaring Tool

    $72.37

    Part No: 160CV

    Brake Line Flaring Tool

    $72.37

    The Pistol Grip Brake Flaring Tool is an adaptable tool to allow easy flaring. It can be used on the vehicle or in a vise by simply removing the handle.

    • Pistol grip handle and lock on clamps to allow easy flaring
    • Can be used on the vehicle or in a vise by simply removing the handle
    • For use with steel, nickel and copper lines
    • For making double and bubble flares on 3/16” and 4.75mm tubing

    UPC: 047084001608
    Shipping Weight: .85lbs

    160 Instructions

    160 Parts Breakdown

    160 Brake Flaring Tool Flyer

    Quick View