Product Categories
Showing 73–84 of 314 results
-
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$82.17Part No: 951
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$82.17These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
FEATURES
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components heat-treated
- 7″ spread, 9/16″ center screw – 20″ x 6-3/8″
Also, available:
134, 2-Ton, Two & Three Jaw Combination Puller
3 1/2″, 4″ spread, 3/8″center screw – 24″ x 4-1/4″952, 5-Ton, Two & Three Jaw Adjustable Combination Puller
5-1/2″, 8″ spread, 9/16″ center screw- 20″ x 6-3/8″Quick View -
Coil Spring Compressor
$82.00Part No: 510
Coil Spring Compressor
$82.00FEATURES
- This tool removes and installs coil springs quickly and safely
- Compress coil springs on all passenger cars and pick-up trucks
- Instructions included
- Not for use with impact tools
This tool should not be used on unusually large coil springs which have a coil outside diameter larger than 5 5/8″ or a wire diameter exceeding 3/4″.
Quick View -
Bearing Splitter, Medium
$81.77Part No: 509
Bearing Splitter, Medium
$81.77• Designed to remove and pull bearings in tight areas
• Capacity 3″ to 4-1/2″
• Removes thin faced & cone shape gears, with a beveled edge that can be easily placed behind part to secure gripping surface
• Split and separate bearings where puller jaws cannot be used
• Made from industrial strength steelQuick View -
13 Piece Alternator Pulley Service Kit
$81.66Part No: 753
13 Piece Alternator Pulley Service Kit
$81.66FEATURES
- Alternator Decoupler Pulley kit for servicing late model vehicles with OWC One-Way-Clutch and OAD Overrunning Alternator Decoupler pulleys.
- 13 Piece kit used to service many popular late model vehicles with both OWC and OAD alternator pulleys.
- To remove these pulleys the shaft coming from alternator needs to be locked in place while the pulley is spun either clockwise or counter clockwise depending on the manufacturer.The opposite would be used in installation.
- Covers most US Euro makes and models with both on and off vehicle applications: Audi BMW Buick Cadillac Chevrolet Chrysler Citroen Dodge Fiat Ford Honda Lexus Mercury Mercedes-Benz Pontiac Porsche Saturn Scion Toyota VW.
Quick View -
Universal Caliper Turn and Push-Back Tool
$80.00Part No: 727
Universal Caliper Turn and Push-Back Tool
$80.00FEATURES
Compresses any size brake caliper, from motorcycles, standard size cars, trucks and SUVs, and even 18 wheelers.
A 3/8 ratchet can be inserted on the end of the Tool for much easier use
Can also perform front brake jobs by flipping the head around
Eliminates need for sets with high piece countsQuick View -
Serpentine Belt Tool Set
$80.00Part No: 738
Serpentine Belt Tool Set
$80.00FEATURES
- Fits tensioner pulleys with 13mm-16mm 18mm hex or 3⁄8“” and 1⁄2“” square drives. For hard to access tensioners; there are 13mm and 15mm 12point wrenches built into the handle.
- 13mm 14mm and 15mm crows foot wrenches also included.
Quick View -
Bushing Driver Set
$80.00Part No: 504
Bushing Driver Set
$80.00FEATURES
- Remove or install bushings from 3⁄8” to 13⁄8” in diameter. Found in cars trucks tractors construction equipment electric motors and many other components containing bushings.
- Includes sixteen bushing adapters ranging from 3⁄8” to 13⁄8” large medium and small driver handles.
- Comes in a blow-molded storage case.
Quick View -
Variable Pin Spanner Wrench
$79.00Part No: 752
Variable Pin Spanner Wrench
$79.00FEATURES
- The universal design of this wrench ensures that it will fit on a wide variety of pulleys that feature holes or slots including both crankshaft and camshaft pulleys.
- This versatile wrench is widely adjustable from 1 1⁄4” up to 5. Use with a 1⁄2” drive ratchet or breaker bar.
- The tool accommodates the most common metric size pin configurations including:
- 3.5 mm Pin
- 4 mm Pin
- 4.5 mm Pin
- 5 mm Pin
- 6 mm Pin
- 7 mm Pin
- 10 mm Pin
Quick View -
6PC OIL FILTER WRENCH SET WITH HOLDER
$75.00Part No: 99100CV
6PC OIL FILTER WRENCH SET WITH HOLDER
$75.00- Features a swivel handle that allows user to get to filters in hard to reach areas
- Wide dimpled band securely grips filters without crushing
- Ergonomic cushioned rubber grip
- Heavy duty magnetic base holder for secure metal surface placement
- Locknut allows user to tighten or loosen swivel handle feature
- Sizes included:
- Part #99001: 2-1/4″-2-7/8″ (57-73MM)
- Part #99002: 2-9/16″-3-1/4″ (65-83MM)
- Part #99003: 2-61/64″-3-3/4″ (75-95MM)
- Part #99004: 3-5/8″-4-3/8″ (92-111MM)
- Part #99005: 3-15/16″-4-23/32″ (100-120MM)
- Part #99006: 4-23/32″-5-3/4″ (120-146MM)
Quick View -
Adjustable Bearing, Seal Driver
$75.00Part No: 506
Adjustable Bearing, Seal Driver
$75.00FEATURES
All in one design eliminates the need for a driver and different size adapters
Locking screw holds the adjustable jaws in place for one hand use
Durable sturdy aluminum construction, equipped with a steel capped striker shaft handle
4-stepped jaws quickly adjust to accommodate bearing races and seals from .708” – 3.543” (18mnm – 90mm)Quick View -
Long Reach Harmonic Balancer and Pulley Installer
$75.00Part No: 38700
Long Reach Harmonic Balancer and Pulley Installer
$75.00FEATURES
- An Extra Long Reach Tool Kit for the Installation of Underdrive or Oversized Pulleys and Applications with Recessed Threads on the Crankshaft
- The Long Reach Balancer – Pulley Installer is a kit for installing harmonic balancer pulleys on many popular late model Ford GM Dodge and Chrysler vehicles with V6 and V8 engines that have recessed threads for the crank pulley bolt or utilize an underdrive pulley or both.
- Traditional type balancer pulley installers will not work in many of these applications.
- This convenient kit features four high quality long-reach threaded adapters and a universal nut that enables technicians install these pulleys with ease.
Quick View -
Master In-Line Flaring Set
$75.00Part No: 165
Master In-Line Flaring Set
$75.00The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping keeps flares centered and makes the job of flaring easier. Superior to bar type flaring tools.
- The In-Line Flaring Tools unique design locks the adapters cone and tube in a perfect line making perfect factory flares every time with less risk of breaking adapters.
- With the clamp and set screws putting pressure directly over the tube you greatly reduce the chance of the tube slipping from the clamp. Also this increases the overall life of the clamp by not wearing down the teeth inside from repeated slipping.
- The slender low profile design of this tool allows the user to make flares on the vehicle and in tight spaces. Flares can be achieved along frame rails or areas in the engine compartment saving the user time from having to remove components or complete lines to make repairs.
- Set includes everything needed to do the following:
- 3/16″, 1/4″, 5/16″, 3/8″ Double and Single Flares
- 4.75mm, 6mm, 8mm Double and Bubble Flares
UPC: 047084001653
Shipping Weight: 2.99lbsQuick View