CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Tubing Cutting and Fabrication

Showing all 8 results

  • Constant Pressure Tube Cutter 1/8″ – 1 1/8″

    $45.00

    Part No: 158

    Constant Pressure Tube Cutter 1/8″ – 1 1/8″

    $45.00

    FEATURES

    • The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter to until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
    • The 158 can cut a range of tubing sizes from 1/8 to 1 1/8.
    • Features a replaceable blade.
    Quick View

  • Heavy Duty Tubing Bender

    $30.00

    Part No: 758

    Heavy Duty Tubing Bender

    $30.00

    FEATURES

    • Bends 3⁄16in, 1⁄4in, 5⁄16in, and 3⁄8in diameter copper and steel tubing.
    • Will not cause kinking or collapsing.
    • Includes: Two roller adapters.
    Quick View

  • Constant Pressure Tube Cutter 3/16″ – 7/8″

    $28.00

    Part No: 157

    Constant Pressure Tube Cutter 3/16″ – 7/8″

    $28.00

    FEATURES

    • The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter to until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
    • The 157 can cut a range of tubing sizes from 3/16 to 7/8.
    • Features a replaceable blade.
    Quick View

  • Mini-Mini Constant Pressure Tube Cutter

    $27.00

    Part No: 159

    Mini-Mini Constant Pressure Tube Cutter

    $27.00

    FEATURES

    2” length allows tool to work effectively in tight spaces
    Handles the smallest tubing up to 5/8” Tubing
    Replaceable wheel
    Spring loaded pressure point that keep tension constantly on the tubing allows for a tighten 1 time and cut function

     

    Quick View

  • Double-Deburr Tool

    $25.27

    Part No: 169

    Double-Deburr Tool

    $25.27

    The success of creating a flare with a good seal depends on more than the flaring tool you use. It often comes down to preparation and finish. This tool can clean the inner and outer edges before you begin and clear up and remaining debris after. It is the perfect companion to any of our flaring tools and an upgrade to the one supplied in certain kits.

    • For removing burrs of inner and outer tube diameters when performing secondary operations to tubing, steel or copper
    • Aluminum, lightweight, body and a sharp, high-speed, steel cutting edges to hold up in any environment
    • Inner reamer is a retractable for safety
    • Works with tubing range of 1/8″ to 1/2″ (3mm – 12mm)

    Quick View

  • In-Line Flaring Tool Auto-Specific Set

    $24.00

    Part No: 161

    In-Line Flaring Tool Auto-Specific Set

    $24.00

    FEATURES

    • Make Perfect Flares Every Time!
    • Use to make single and double flares
    • The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping keeps flares centered and makes the job of flaring easier. Superior to bar type flaring tools.
    • Low profile design allows for use on or off the vehicle
    • Designed to be used with a ratchet to make flares easier
    • In line design makes a more accurate flare
    • Double clamp and hex screw design keeps tubing locked tightly in position
    • For use on thin walled steel and copper tubing
    • Available in SAE 164 Metric 154 and Auto-Specific Set 161
    • Patent Pending
    Quick View

  • Tube Bend Mirror Adapters

    $20.22

    Part No: 75902

    Tube Bend Mirror Adapters

    $20.22

    These adapters allow users to easily create matching bends and angles on two lines at the same time or use an existing tube to guide the creation of a replacement line. Remove the guesswork and do it right the first time.

    • Adapters used to mirror or match the brake line runs for duplication of bends.
    • Allows users to precisely match proper angles and points on run to make bends.
    • For steel, copper, and plastic-coated brake lines with diameters of 3/16” (4.75mm) or ¼” (6.3mm)

    Quick View

  • Mini Tubing Cutter

    $9.23

    Part No: 151

    Mini Tubing Cutter

    $9.23

    FEATURES

    • Cuts soft and Copper tubing 1⁄8” to 5⁄8” in Diameter
    • Alloy Steel cutting wheel
    Quick View