CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Product Categories

Showing 61–72 of 295 results

  • Sale!

    16 PC MASTER WHEEL LOCKING NUT KEY SET

    $89.99

    Part No: 75510CV

    16 PC MASTER WHEEL LOCKING NUT KEY SET

    $89.99

    Locking lug nuts are a great deterrent of wheel theft, but for mechanics, they can quickly make an easy job more difficult. This set makes removing wheel locks simple. This set consists of 8 internally splined bits along with 8 hex and star bits.

    • Designed for removing many OEM and aftermarket specific locking wheel lug nuts
    • Reduces chances of damaging lug nuts or wheels
    • Chrome-vanadium construction and rust-resistant, black oxide finish
    • Contains eight inner-splined keys and eight outer-splined keys
    • All organized in a blow-molded case

    Inner-splined sizes:

    5-spline Short 5/8″, 6-spline 41/64″, 6-spline 45/64″, 7-spline Medium 5/8″, 7-spline Short 11/16″,
    7-spline Long 3/4″, 12-spline 11/16″, and 12-spline 13/16″

    Outer-splined sizes:

    8-pt Star 7/16″, 8-pt Star Lug 5/8″, 9-pt Star Lugs 1/2″, 10-pt Star Lug 1/2″, Fluted Hex 12mm Outer,
    Hex Lug 12mm, Hex Lug 15mm, and Hex Lug 9/16″

     

    Quick View
  • WiFi Borescope

    $89.99

    Part No: 84

    WiFi Borescope

    $89.99

    Feature and benefits:

    • High-resolution, multiple aspect camera (1920×1080, 1280×720, and 640×480) with adjustable LED lighting.
    • Uses an independent WiFi signal (approximate range is 30 ft.), there’s no need to be connected to a computer.
    • Mobile app for both Android (2.3 and up) and IOS (6.0 and up) devices gives users options: image capture, video recording and album storage.
    • Lens and cable are IP67 certified, dustproof and waterproof in up to 3 feet of water for up to 30 minutes. (Transmitter is not rated as such.)
    • Long, bendable cable (58 inch) is flexible yet rigid enough to give users access into hard to view areas.
    • Compact camera is only 6mm in diameter by 35mm in length, allowing user greater access.
    Quick View
  • Coil Spring Clamps

    $88.49

    Part No: 91000

    Coil Spring Clamps

    $88.49

    FEATURES

    • Three piece heavy duty tool allows for easy removal or installation where removal of sprin through the center is not possible.
    • Set clamps in any position.
    • Tool comes with three safety U-Bolts.
    • Not for use with impact tools.
    Quick View
  • Ratcheting Harmonic Balance Puller

    $88.00

    Part No: 38000

    Ratcheting Harmonic Balance Puller

    $88.00

    Remove harmonic balancers without the hassle of trying to start bolts or the frustration of positioning multi-jointed puller legs.

    • Three ratcheting legs with puller feet eliminate the need for bolts
    • No need to remove the radiator or other components with this compact design
    • Legs quickly adjust and hold their position
    • Push turn click design
    • Dimensions: 3.7 6 ” x 4.8 2 ” x 3.6 5

    Applications:
    FORD 5.0 Coyote
    GM 5.3L, 5.7(LS1), 6.0(LS2), 6.2(LS3), and 7.0L
    MISC Most three and six spoke harmonic balancers/pulleys

    Parts Breakdown:
    38001
    Ratcheting Yoke
    38002
    Forcing Screw
    38003
    Harmonic Jaws 3 Pcs.
    38004 Flat Press Adaptor with O Ring

    Quick View
  • Tube Service Set

    $86.94

    Part No: 82800

    Tube Service Set

    $86.94

    FEATURES

    • This kit features the tools that a technician will need to make SAE single and double flares on soft steel or copper tubing. All of these tools come in one convenient blow molded case. Set contains:
    • Double flaring tool (Item # 163) for making single and double flares on soft steel or copper tubing.
    • Works on 316 14“, 516“,38“, and 12” tubing for single or double flares.
    • 151 Mini Tube cutter to cut 18” to 58” tubing
    • 758 Heavy Duty Tube Bender plier type bender that bends steel tubing 316“, 516” and 38” without kinking or collapsing.
    • A reamer to de-burr cut tubing and ensure better flares
    Quick View
  • Harmonic Balancer Puller

    $86.94

    Part No: 386

    Harmonic Balancer Puller

    $86.94

    FEATURES

    • Designed for removing damper pulleys in tight engine compartments without removing the radiator.
    • Kit contains the 3jaw puller four lengths of forcing rods and a forcing screw with a 38” square drive for ratchet use and a 34” hex for wrench or socket use.
    • Applications: GM 2000 Generation III 4.8L, 5.3L, 5.7L, 6.0L and 8.1L V8s.
    • Also works on Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988.
    • Chevrolet trucks 2003 – later 4.2L, I6, 2004 – current 3.5L, I5 and 2005 – current 2.8L I4.
    • Chrysler engines from 1990 – later, including 2.0L, 2.4L – 4s; plus 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s.
    • Ford 1995 – later V8 engines with 3 spoke pressed on damper.
    • Mitsubishi Eclipse 1995 – 1999 2.0L DOHC non-turbo.
    Quick View
  • Two & Three Jaw Adjustable Combination Puller, 8″ Spread

    $86.72

    Part No: 952

    Two & Three Jaw Adjustable Combination Puller, 8″ Spread

    $86.72

    These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.

    FEATURES

    • Pullers have standard threads, zinc, and black oxide finish
    • Yoke and jaws are forged, and all components heat-treated
    • 8″ spread, 9/16″ center screw- 20″ x 6-3/8″

    Also, available:

    134, 2-Ton, Two & Three Jaw Combination Puller
    3 1/2″, 4″ spread, 3/8″center screw – 24″ x 4-1/4″

    951 Two & Three Jaw Combination Reversible Puller
    3-1/2″, 7″ spread, 9/16″ center screw – 20″ x 6-3/8″

    Quick View
  • Rear Axle Bearing Puller Set

    $85.00

    Part No: 91800

    Rear Axle Bearing Puller Set

    $85.00

    Designed to remove flange type, semi-floating rear axle bearings in most late model, rear-wheel drive cars and light-trucks.
    • Includes 3 bearing pullers with a range from 1″ up to 2-7/8″
    • For flange-type, semi-floating bearings
    • Designed to capture rear axle bearings firmly
    • Comes in a blow-molded case

    Quick View
  • Large and Small OFW Set

    $84.29

    Part No: 29200

    Large and Small OFW Set

    $84.29

    FEATURES

    • Combination set of the 302 and 29200 oil filter wrenches.
    • 302 – Adjustable Oil Filter Pliers: Self adjusting spring action NOT a slip joint oil filter pliers allow for a full range of filter applications. Heavy duty forged construction with textured grip add both strengthened leverage to the tool. Fits filters from 214in to 534in (57mm-146mm).
    • 29900 – Truck & Tractor Oil Filter Pliers: Spring loaded adjustable pliers can easily adjust from 334in to 712in Heavy forged construction creates leverage for high torque applications. Can be used in one hand applications.
    Quick View
  • Two & Three Jaw Combination Reversible Puller, 7″ Spread

    $82.17

    Part No: 951

    Two & Three Jaw Combination Reversible Puller, 7″ Spread

    $82.17

    These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.

    FEATURES

    • Pullers have standard threads, zinc, and black oxide finish
    • Yoke and jaws are forged, and all components heat-treated
    • 7″ spread, 9/16″ center screw – 20″ x 6-3/8″

    Also, available:

    134, 2-Ton, Two & Three Jaw Combination Puller
    3 1/2″, 4″ spread, 3/8″center screw – 24″ x 4-1/4″

    952, 5-Ton, Two & Three Jaw Adjustable Combination Puller
    5-1/2″, 8″ spread, 9/16″ center screw- 20″ x 6-3/8″

    Quick View
  • Coil Spring Compressor

    $82.00

    Part No: 510

    Coil Spring Compressor

    $82.00

    FEATURES

    • This tool removes and installs coil springs quickly and safely
    • Compress coil springs on all passenger cars and pick-up trucks
    • Instructions included
    • Not for use with impact tools

    This tool should not be used on unusually large coil springs which have a coil outside diameter larger than 5 5/8″ or a wire diameter exceeding 3/4″.

     

    Quick View
  • Bearing Splitter-Medium

    $81.77

    Part No: 509

    Bearing Splitter-Medium

    $81.77

    • Designed to remove and pull bearings in tight areas
    • Capacity 3″ to 4-1/2″
    • Removes thin faced & cone shape gears, with a beveled edge that can be easily placed behind part to secure gripping surface
    • Split and separate bearings where puller jaws cannot be used
    • Made from industrial strength steel

    Quick View