CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

New Products

Showing 1–12 of 34 results

  • HUB WHEEL BEARING MASTER SERVICE SET

    $499.00

    Part No: 94000CV

    HUB WHEEL BEARING MASTER SERVICE SET

    $499.00

    Removes and Installs wheel hubs, bearing races and bearings.

    Quick View
  • Rear Seal Repair Kit

    $325.00

    Part No: 499

    Rear Seal Repair Kit

    $325.00

    Safely and easily remove and install rear main seals and crankshaft wear rings for Ford 7.3 Powerstroke™ engines.

     

    • For 1994-2003 Ford 7.3L diesel engines of 3/4-ton and 1-Ton Trucks (not for Navistar engines)
    • Contains all necessary to remove and install wear sleeve as well
    • Eliminates the need for make-shift method that often lead to unwanted damage
    Quick View
  • DENT PULLER & KNOCKER SET

    $189.99

    Part No: 49800CV

    DENT PULLER & KNOCKER SET

    $189.99

    The paintless dent repair kit comes with the most popular adapters used for auto body pulling applications. Heavy duty 9-1/2LBS hammer easily helps pulling dents without strain or any need for extra specialty tools. All adapter attachments are heat treated and plated for strength, longevity and durability.

    • Kit comes with the most popular adapters for auto body pulling applications
    • Comes with 9-1/2 LBS slide hammer
    • All attachments are heat treated and plated for strength and longevity

    Quick View
  • HEAVY DUTY BEARING CUP INSTALLER

    $165.00

    Part No: 20300

    HEAVY DUTY BEARING CUP INSTALLER

    $165.00

    Accurately install bearing cups in minutes into the Dana/Spicer SPL Life Series quick-disconnect u-joints.

    • Three adapters to fit SPL 140, 170, 250 Series drivelines
    • Great Partner Tool for Heavy Duty U-Joint Puller (Part No.199) and HD Yoke Puller (Part No. 497)
    • Use on quick disconnect universal joint only
    • Can be used with hand and air tools

     

     

    Quick View
  • 5PC MAGNETIC TOOL BOX TRAY SET

    $125.92

    Part No: 90950CV

    5PC MAGNETIC TOOL BOX TRAY SET

    $125.92

    The 5 piece magnetic toolbox tray set, comes with heavy duty non-marring rubber coated magnets that will not scratch any metal surface applied to. The 6″ (Part #90941CV) and 12″ (Part #90942CV) magnetic shelf trays easily holds fasteners, small parts and tools by any work area. The Magnetic spray can tray (Part #90943CV) easily holds 3 spray cans and 7 various sized screwdrivers, while the pair of magnetic paper towel (Part #90944CV), easily holds a common sized roll of paper towel, roll of shop towels by any work area and the magnetic vinyl glove holding tray (Part #90945CV) helps keep glove boxes neat where you need them the most. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

    • Heavy Duty non-marring rubber coated magnets
    • Industrial Grade powder coating finish resist rust and corrosion
    • Paper Towel holder will adjust any any length roll
    • 3 spray can holder tray with 7 various sized screwdriver holes
    • Adjustable side springs to hold glove boxes in place

    Quick View
  • BEARING CUP INSTALLER

    $105.33

    Part No: 20200

    BEARING CUP INSTALLER

    $105.33

    FEATURES

    An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this assembly is secured, a second bearing cup is positioned for installation by means of the plunger found at the end of the forcing screw. An impact or hand wrench is applied to the forcing screw, securing the first bearing cup in place and allowing installation of the first retaining clip.

    • Install two bearing cups in one procedure on virtually all medium and light duty U-joints
    • Manufactured from high-grade steel for strength and durability. Simple to use for instant results

    Applications:
    Light Duty to Medium Duty U joints.

    Parts Breakdown:

    20201 C Frame
    20202 Forcing Screw
    20203 Flat Press Adapter
    20204 O Ring

    Dimensions: 11.50″ x 1.85″ x 5.17″

    Quick View
  • 5 PC LUG & LOCK FLIP SOCKET SET

    $102.57

    Part No: 96100CV

    5 PC LUG & LOCK FLIP SOCKET SET

    $102.57

    The 5 piece lug and lock flip socket set is designed to easily remove damaged lug nuts, using the 6 fluted twist socket end. Flip socket to other end to remove wheel locks with its 12 fluted twist design. A 1/2″ Dr. 3″ extension bar is recommended to use during operation.

    • Sockets designed with 6 fluted twists for damaged lug nuts
    • Flip Socket opposite end has 12 fluted twists for wheel locks
    • All flip sockets have a 1/2″ Dr. design
    • 1/2″ Dr. 3″ extension bar included
    • Heavy Duty blow molded case for storage

    Set Includes: 7/8″ Lug & Lock Flip Socket, 21MM Lug & Lock Flip Socket, 19MM-3/4″ Lug & Lock Flip Socket, 17MM Lug & Lock Flip Socket, 1/2″ Dr. 3″ Extension Bar

    Quick View
  • 6 PC DOUBLE FLIP SOCKET

    $91.76

    Part No: 96110CV

    6 PC DOUBLE FLIP SOCKET

    $91.76

    The 6 piece double flip socket set is designed to easily remove damaged lug nut, using the 6 fluted twist socket end. Flip socket to other end and use a traditional 6 point to remove and install lug nuts. A 1/2″ Dr. 3″ extension bar is recommended to use during operation.

    • Standard 6 Point and 6 fluted twist flip socket design
    • 6 fluted twist end is designed to remove damaged lug nuts
    • Made from Chrome molybdenum steel for strength and durability
    • Black oxide coating resists corrosion
    • 1/2″ Dr. 3″ Extension Bar included

    Set Includes: 17MM Double Flip Socket, 19MM Double Flip Socket, 13/16″ Double Flip Socket, 21MM Double Flip Socket, 7/8″ Double Flip Socket, 1/2″ Dr. 3″ Extension Bar

    Quick View
  • PITMAN ARM SPREADER

    $91.00

    Part No: 18650CV

    PITMAN ARM SPREADER

    $91.00

    The Pitman Arm Spreader provides for the quick and safe removal of Pitman Arms on 2-ton and larger trucks. The high strength adjustable pulling arms fit various widths of pitman arms for easy installation and removal of the tool. Made of 4140 heat-treated steel, the Pitman Arm Spreader can be used with up to a 1/2″ impact wrench. Simply slip it on for instant results.

    • Pitman arms found on class 3-8 trucks and heavy duty equipment
    • Fits Chevrolet 3500/5500, Dodge Ram 3500/5500, Ford F-350/F-550, Isuzu NPR, Freightliner, Kenworth, Mack, Peterbilt, Volvo and other heavy duty applications

    Quick View
  • EXTRA LONG RATCHETING CHAIN WRENCH

    $89.99

    Part No: 87000CV

    EXTRA LONG RATCHETING CHAIN WRENCH

    $89.99

    This versatile tool combines a heavy-duty 24″ chain to grip nearly any shape round, square, or otherwise and a knurled, chrome-plated 20″ handle to provide leverage to loosen almost anything, even in tight working spaces.

    • Use to grip nearly any round or multifaceted object 3″ to 6.75″ in diameters, such as pipe, conduit, or other various items
    • Robust, 20-inch chrome-plated and knurled handle provides enough leverage for even the most stubborn items
    • Quickly adjusts for another turn without removing the tool or resetting the chain
    • Easy to reverse direction, loosen the chain, flip the handle, and seat the chain

    Quick View
  • Ratcheting Harmonic Balance Puller

    $88.00

    Part No: 38000

    Ratcheting Harmonic Balance Puller

    $88.00

    Remove harmonic balancers without the hassle of trying to start bolts or the frustration of positioning multi-jointed puller legs.

    • Three ratcheting legs with puller feet eliminate the need for bolts
    • No need to remove the radiator or other components with this compact design
    • Legs quickly adjust and hold their position
    • Push turn click design
    • Dimensions: 3.7 6 ” x 4.8 2 ” x 3.6 5

    Applications:
    FORD 5.0 Coyote
    GM 5.3L, 5.7(LS1), 6.0(LS2), 6.2(LS3), and 7.0L
    MISC Most three and six spoke harmonic balancers/pulleys

    Parts Breakdown:
    38001
    Ratcheting Yoke
    38002
    Forcing Screw
    38003
    Harmonic Jaws 3 Pcs.
    38004 Flat Press Adaptor with O Ring

    Quick View
  • 8 PIECE AIR BLOW GUN SET

    $73.34

    Part No: 40500CV

    8 PIECE AIR BLOW GUN SET

    $73.34

    This 8pc air blow gun kit comes with 7 different application interchangeable tips designed to blow off work areas, used to dry off surfaces and easily inflates pool toy and balloons.

    • Ideal for cleaning debris from work area
    • Use to dry off wet surfaces
    • Easily inflate pool toys and balloons
    • 1/4″ NPT Female Threaded Air Inlet

    Specs:

    • Air gun body working air pressure 160PSI
    • Air gun body maximum air pressure 220PSI
    • Air consumption at 160PSI without tip 15.0 CFM
    • Working temp range -4 degrees to 185 degrees

    Quick View