CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Pullers and Installers

Showing 1–12 of 44 results

  • Heavy Duty Yoke Puller

    $379.14

    Part No: 497

    Heavy Duty Yoke Puller

    $379.14

    Simplifies and expedites the removal of heavy-duty yokes on driveshafts, transmissions, and drive axles without damage to yokes or other components. Also, the caps are designed with flexibility in mind to service an extensive range of class 6-8 trucks.

     

    • Fits on multiple Spicer full and half round yokes
    • Fits on Meritor (Rockwell) RPL 20 & 25 series
    • Manufactured from high grade steel
    Quick View
  • In-Line Dowel Pin Puller Master Set

    $296.63

    Part No: 95400

    In-Line Dowel Pin Puller Master Set

    $296.63

    FEATURES

    No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel. Master Set includes both SAE and Metric collets.

    • A simple and effective method for removing dowel pins
    • Can be used with an air ratchet, or traditional ratchets
    • Elimination of the slide hammer saves time and money while eliminating the potential of injury
    • Comes in a blow-molded case
    • Patent pending

    Contains:
    SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
    Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm

    95200, In-Line Dowel Pin Puller Set, SAE Only
    95300, In-Line Dowel Pin Puller Metric, Metric Only

    Quick View
  • Blind Hole Puller Set

    $269.78

    Part No: 29

    Blind Hole Puller Set

    $269.78

    • Designed for removing bearings from a recessed location.
    • Set includes a 2-1/2 lbs. slide hammer with T-handle and four collets, for a range of applications with 3/8″– 1-1/4″ (10mm to 32mm) inner diameter holes
    • Ideal for removing pilot bearings

    Quick View
  • Heavy Duty U-Joint Puller

    $247.80

    Part No: 199

    Heavy Duty U-Joint Puller

    $247.80

    A heavy-duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks and machinery.

    • Engineered for use with up to a 1″ impact tool
    • Eliminates dangerous vice-and-socket or hammering removal methods
    • Does not damage the driveshaft, yokes, joints or bearing cups

    Applications

    • U-Joints with bearing cups 1.5″ to 2.2″ O.D
    • Spicer 1610, 1710, 1760, 1810, 1880 Series
    • Spicer SPL 140, 170, & 250 Life Series
    • Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
    • Meritor RPL 20, 25 Permalube™ Series
    Quick View
  • In-Line Dowel Pin Puller St, Metric

    $194.09

    Part No: 95300

    In-Line Dowel Pin Puller St, Metric

    $194.09

    No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel.

    FEATURES

    • Simple and effective method for removing dowel pins
    • Can be used with an air ratchet, or traditional ratchets
    • Elimination of the slide hammer saves time and money while eliminating the potential of injury
    • Comes in a blow-molded case
    • Patent pending

    Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm

    95200, In-Line Dowel Pin Puller Set, SAE

    95400, In-Line Dowel Pin Puller Master Set (SAE and Metric combined)

    Quick View
  • Ball Joint Super Set

    $193.89

    Part No: 196

    Ball Joint Super Set

    $193.89

    Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins

    FEATURES

     

    Contains:

    • 3 receiver tubes
      • 2- 3/4″ ID X 3″ OD
      • 2- 1/4″ ID x 2 1/2″ OD
      • 1- 3/4″ ID X 2″ OD
    • Installation and removing adapters
      • 1 installing cup
      • 1 receiving cup
      • 1 installing adapter
    Quick View
  • In-Line Dowel Pin Puller Set, SAE

    $187.88

    Part No: 95200

    In-Line Dowel Pin Puller Set, SAE

    $187.88

    FEATURES

    No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use outer sleeve and nut to extract the dowel.

    • Simple and effective method for removing dowel pins
    • Can be used with air ratchet, or traditional ratchets
    • Elimination of the slide hammer saves time and money while eliminating the potential of injury
    • Comes in a blow molded case
    • Patent pending

    SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″

    95300, In-Line Dowel Pin Puller Metric, Metric
    95400, In-Line Dowel Pin Puller Master Set

     

    Quick View
  • Bearing Splitter-Large

    $177.01

    Part No: 511

    Bearing Splitter-Large

    $177.01

    • Designed to remove and pull bearings in tight areas
    • Capacity 4″ to 6″
    • Removes thin faced & cone shape gears, with a beveled edge that can be easily placed behind part to secure gripping surface
    • Split and separate bearings where puller jaws cannot be used
    • Made from industrial strength steel

    Quick View
  • 7-Ton Bar Type Puller Bearing Separator Set

    $174.92

    Part No: 501

    7-Ton Bar Type Puller Bearing Separator Set

    $174.92

    FEATURES

    • Includes a Bearing Splitter with 4″ capacity two sets of hex push puller legs a 8″ bar type puller head mated with a custom thread forcing screw
    • Professionals have a Puller-Bearing set for hard jobs up to 7-tons larger applications and a greater reach 8″ to 16″
    Quick View
  • Two & Three Jaw Combination Adjustable Puller, 11″ Spread

    $172.79

    Part No: 954

    Two & Three Jaw Combination Adjustable Puller, 11″ Spread

    $172.79

    These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.

    FEATURES

    • Pullers have standard threads, zinc, and black oxide finish
    • Yoke and jaws are forged, and all components heat-treated
    • 9″, 11″ spread, 11/16″ center screw – 18 x 8-3/8″

    Also, available:

    134, 2-Ton, Two & Three Jaw Combination Puller
    3 1/2″, 4″ spread, 3/8″center screw – 24″ x 4-1/4″

    951 Two & Three Jaw Combination Reversible Puller
    3-1/2″, 7″ spread, 9/16″ center screw – 20″ x 6-3/8″

    952, 5-Ton, Two & Three Jaw Adjustable Combination Puller
    5-1/2″, 8″ spread, 9/16″ center screw- 20″ x 6-3/8″

    953 7-Ton, Two & Three Jaw Combination Reversible Puller
    5-1/2″, 10″ spread, 11/16″ center screw – 18″ x 8-3/8″

    954 7-Ton, Two & Three Jaw Combination Adjustable Puller
    9″, 11″ spread, 11/16″ center screw – 18″ x 8-3/8″

    Quick View
  • 9 Way Slide Hammer Puller Set

    $168.49

    Part No: 956

    9 Way Slide Hammer Puller Set

    $168.49

    FEATURES

    • Pulls flange-type, rear axles, and most front-wheel drive hubs
    • Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals
    • Two and three-way cross blocks and cones provide the perfect jaw configuration for most jobs
    • Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements
    Quick View
  • Two & Three Jaw Combination Reversible Puller, 10″

    $162.26

    Part No: 953

    Two & Three Jaw Combination Reversible Puller, 10″

    $162.26

    These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.

    FEATURES

    • Pullers have standard threads, zinc, and black oxide finish
    • Yoke and jaws are forged, and all components heat-treated
    • 5-1/2″, 10″ spread, 11/16″ center screw – 18 x 8-3/8″

    Also, available:

    134, 2-Ton, Two & Three Jaw Combination Puller
    3 1/2″, 4″ spread, 3/8″center screw – 24″ x 4-1/4″

    951 Two & Three Jaw Combination Reversible Puller
    3-1/2″, 7″ spread, 9/16″ center screw – 20″ x 6-3/8″

    952, 5-Ton, Two & Three Jaw Adjustable Combination Puller
    5-1/2″, 8″ spread, 9/16″ center screw- 20″ x 6-3/8″

    954 7-Ton, Two & Three Jaw Combination Adjustable Puller
    9″, 11″ spread, 11/16″ center screw – 18″ x 8-3/8″

    Quick View