CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Tube Fabrication

Showing 1–12 of 20 results

  • Hydraulic In-line Flaring Tool

    $221.29

    Part No: 166

    Hydraulic In-line Flaring Tool

    $221.29

    Integrates Hydraulic assist to create an easy to use, versatile kit. This time saving tool enables technicians to make perfect flares every time, even in tight access areas for on-car applications. It handles single, double, and bubble flares with the option to expand into quick connect fitting.

    FEATURES

    • Creates single, double, and bubble flares with the option to expand into quick-connect fittings
    • Includes Constant Tension Tube Cutter

    Tubing Sizes: 

    SAE: 3/16″, 1/4″, 5/16″, and 3/8″
    Metric: 4.75mm, 6mm, and 8mm

    Quick View
  • Double & Bubble Flaring Tool Set

    $105.17

    Part No: 82900

    Double & Bubble Flaring Tool Set

    $105.17

    FEATURES

    • This set contains the tools necessary to create single or double flares as well as Bubble Flares on soft steel and copper tubing.
    • This two-in-one kit contains the Double Flare Tool (Item #163) and the Bubble Flare Tool (Item #82700) in one convenient blow molded case.
    • Single & Double Flares 316“, 14“, 516“, 38“, and 12 tubing.
    • Bubble Flares 4.75mm, 6mm, 8mm, 10mm tubing.
    • Includes Tube Cutter.
    Quick View
  • Master In-Line Flaring Set

    $104.32

    Part No: 165

    Master In-Line Flaring Set

    $104.32

    FEATURES

    • The In-Line Flaring Tools unique design locks the adapters cone and tube in a perfect line making perfect factory flares every time with less risk of breaking adapters.
    • With the clamp and set screws putting pressure directly over the tube you greatly reduce the chance of the tube slipping from the clamp. Also this increases the overall life of the clamp by not wearing down the teeth inside from repeated slipping.
    • The slender low profile design of this tool allows the user to make flares on the vehicle and in tight spaces. Flares can be achieved along frame rails or areas in the engine compartment saving the user time from having to remove components or complete lines to make repairs.
    • Set includes everything needed to do the following:
    • 316“, 516“, 38” Double and Single Flares
    • 4.75mm, 6mm, 8mm Double and Bubble Flares
    Quick View
  • Tube Service Set

    $86.94

    Part No: 82800

    Tube Service Set

    $86.94

    FEATURES

    • This kit features the tools that a technician will need to make SAE single and double flares on soft steel or copper tubing. All of these tools come in one convenient blow molded case. Set contains:
    • Double flaring tool (Item # 163) for making single and double flares on soft steel or copper tubing.
    • Works on 316 14“, 516“,38“, and 12” tubing for single or double flares.
    • 151 Mini Tube cutter to cut 18” to 58” tubing
    • 758 Heavy Duty Tube Bender plier type bender that bends steel tubing 316“, 516” and 38” without kinking or collapsing.
    • A reamer to de-burr cut tubing and ensure better flares
    Quick View
  • Bubble Flaring Tool

    $69.95

    Part No: 82700

    Bubble Flaring Tool

    $69.95

    FEATURES

    • Forms Bubble Flares in soft steel and copper tubing.
    • Flares metric Hydraulich brake lines used on Japanese European and domestic automobiles.
    • Works on 4.75mm, 6mm, 8mm, 10mm Tubing.
    • Makes Bubble Flares in one operation.
    Quick View
  • Brake Line Flaring Tool

    $65.86

    Part No: 160

    Brake Line Flaring Tool

    $65.86
    Quick View
  • Metric Double Flaring Tool

    $63.54

    Part No: 153

    Metric Double Flaring Tool

    $63.54

    FEATURES

    • Designed to withstand high pressures necessary to double-flare soft steel tubing as well as single-flare soft copper aluminum and brass tubing.
    • Set includes drop forged compressor yoke 5 double-flare adapters and threaded die holding bar with size capacity 4.75mm, 5mm, 6mm, 8mm, and 10mm.
    • Blow molded case.
    Quick View
  • Double Flaring Tool

    $60.45

    Part No: 163

    Double Flaring Tool

    $60.45

    FEATURES

    • This 45 degree double flaring tool set is designed to withstand the high pressure necessary to double flare soft steel tubing as well as single flare soft copper aluminum and brass tubing.
    • Includes: Five (5) double flare adapters drop forged compressor yoke and bar assembly w/ size capacity – 316in, 14in, 516in, 38in, and 12.
    • Also available in Metric w/ size capacity- 4.15mm, 5mm, 6mm, 8mm, and 10mm. (153)
    Quick View
  • Bubble ISO In-Line Tube Flaring Kit

    $56.17

    Part No: 156

    Bubble ISO In-Line Tube Flaring Kit

    $56.17

    FEATURES

    • Works for Bubble-ISO flares 4.75mm, 6mm, 8mm tubing.
    • Low profile design allows for use on the car or off.
    • Designed to be used with a ratchet to make flares easier.
    • In line design make a more accurate flare.
    • Double clamp and hex crew design keeps tubing locked tightly in position.
    • For use on thin walled steel and copper tubing.
    • Comes in easy store case.
    Quick View
  • In-Line Flaring Tool Metric

    $50.05

    Part No: 154

    In-Line Flaring Tool Metric

    $50.05

    FEATURES

    • Make Perfect Flares Every Time!
    • Use to make single and double flares
    • The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping keeps flares centered and makes the job of flaring easier. Superior to bar type flaring tools.
    • Low profile design allows for use on or off the vehicle
    • Designed to be used with a ratchet to make flares easier
    • In line design makes a more accurate flare
    • Double clamp and hex screw design keeps tubing locked tightly in position
    • For use on thin walled steel and copper tubing
    • Available in SAE 164 Metric 154 and Auto-Specific Set 161
    • Patent Pending
    Quick View
  • In-Line Flaring Tool SAE

    $49.88

    Part No: 164

    In-Line Flaring Tool SAE

    $49.88

    FEATURES

    • Make Perfect Flares Every Time!
    • Use to make single and double flares
    • The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping, keeps flares centered, and makes the job of flaring easier. Superior to bar type flaring tools.
    • Will do 3/16″, 1/4″ and 5/16″ flares.
    • Low profile design allows for use on or off the vehicle
    • Designed to be used with a ratchet to make flares easier
    • In line design makes a more accurate flare
    • Double clamp and hex screw design keeps tubing locked tightly in position
    • For use on thin walled steel and copper tubing
    • Available in SAE (164), Metric (154) and Auto-Specific Set (161)
    • Patent Pending
    Quick View
  • Constant Pressure Tube Cutter 1/8″ – 1 1/8″

    $49.22

    Part No: 158

    Constant Pressure Tube Cutter 1/8″ – 1 1/8″

    $49.22

    FEATURES

    • The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter to until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
    • The 158 can cut a range of tubing sizes from 1/8 to 1 1/8.
    • Features a replaceable blade.
    Quick View