Product Categories
Showing 1–12 of 280 results
-
Floor-Mounted, 2,200 lbs. Spring Compressor
$516.33Part No: 91300
Floor-Mounted, 2,200 lbs. Spring Compressor
$516.33The heavy-duty construction and Adaptive Spring Bracket allow the user to single-handedly compress many of the strut assemblies found on passenger cars, light-trucks, vans, and SUV’s.
FEATURES
- Adaptive Spring Bracket can be configured in multiple configurations
- For strut assemblies with spring coils 3.5″ to 8.75″ wide
- Accepts maximum spring height of 19″
- Can be used with varying coil diameters up to 5/8″
- Easy, one-person use
- Can be mounted to the floor (hardware not provided)
Out of stock
Quick View -
Ball Joint Super Set
$392.94Part No: 197
Ball Joint Super Set
$392.94FEATURES
- This set allows for the removal and installation of press-fit ball joints on many GM and Ford light-duty trucks vans and SUVs through 2003; Dodge light trucks through 1998; Dodge vans Durango and Dakota through 2003; and Honda Accord Civic del Sol and Prelude through 2001.
- C-frame tool can be used alone to remove and replace universal joints
- Comes complete in durable case
Quick View -
Heavy Duty Yoke Puller
$379.14Part No: 497
Heavy Duty Yoke Puller
$379.14Simplifies and expedites the removal of heavy-duty yokes on driveshafts, transmissions, and drive axles without damage to yokes or other components. Also, the caps are designed with flexibility in mind to service an extensive range of class 6-8 trucks.
- Fits on multiple Spicer full and half round yokes
- Fits on Meritor (Rockwell) RPL 20 & 25 series
- Manufactured from high grade steel
Out of stock
Quick View -
Rear Seal Repair Kit
$371.59Part No: 499
Rear Seal Repair Kit
$371.59Safely and easily remove and install rear main seals and crankshaft wear rings for Ford 7.3 Powerstroke™ engines.
- For 1994-2003 Ford 7.3L diesel engines of 3/4-ton and 1-Ton Trucks (not for Navistar engines)
- Contains all necessary to remove and install wear sleeve as well
- Eliminates the need for make-shift method that often lead to unwanted damage
Quick View -
In-Line Dowel Pin Puller Master Set
$296.63Part No: 95400
In-Line Dowel Pin Puller Master Set
$296.63FEATURES
No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel. Master Set includes both SAE and Metric collets.
- A simple and effective method for removing dowel pins
- Can be used with an air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow-molded case
- Patent pending
Contains:
SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm95200, In-Line Dowel Pin Puller Set, SAE Only
95300, In-Line Dowel Pin Puller Metric, Metric OnlyQuick View -
Ford Triton Spark Plug Thread Repair Kit, 2 Valve
$280.00Part No: 38900
Ford Triton Spark Plug Thread Repair Kit, 2 Valve
$280.00Designed to aid in repairing Ford engines modular cylinders heads (1996-2003). Average repair time as short as 25 minutes.
FEATURES
- A quality foolproof repair system that is cost-effective and fast
- High-quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer
- Works with Ford Triton Motors ’96 to ’03
- Works with 4.6L, 5.4L, and 6.8L engines
- 389-100 Replacement inserts
- Patented
Quick View -
Blind Hole Puller Set
$269.78Part No: 29
Blind Hole Puller Set
$269.78• Designed for removing bearings from a recessed location.
• Set includes a 2-1/2 lbs. slide hammer with T-handle and four collets, for a range of applications with 3/8″– 1-1/4″ (10mm to 32mm) inner diameter holes
• Ideal for removing pilot bearingsQuick View -
Heavy Duty U-Joint Puller
$247.80Part No: 199
Heavy Duty U-Joint Puller
$247.80A heavy-duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks and machinery.
- Engineered for use with up to a 1″ impact tool
- Eliminates dangerous vice-and-socket or hammering removal methods
- Does not damage the driveshaft, yokes, joints or bearing cups
Applications
- U-Joints with bearing cups 1.5″ to 2.2″ O.D
- Spicer 1610, 1710, 1760, 1810, 1880 Series
- Spicer SPL 140, 170, & 250 Life Series
- Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
- Meritor RPL 20, 25 Permalube™ Series
Quick View -
SHEPPARD M100 PITMAN ARM PULLER
$213.28Part No: 18620
SHEPPARD M100 PITMAN ARM PULLER
$213.28Our M100 Pitman Arm Puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from Sheppard M100 steering gears found on many class 6 –8 vehicles.
- Replaces less effective, dangerous, and often destructive methods used for removing pitman arms
- Constructed of high-strength materials for increased pulling power and superior durability
- Rated for usage with up to a ¾” drive impact wrench
- Simple and effective design with a wide application range
Applications: Class 6 –8 vehicles, including but not limited to highway transportation vehicles, buses, RVs, and other equipment
Warranty: Limited Lifetime Against Defects
Out of stock
Quick View -
Deutsch Terminal Service Set, 11 Piece
$210.00Part No: 55000
Deutsch Terminal Service Set, 11 Piece
$210.00- Designed to crimp and release the Deutsch terminals found through various industries.
- For use on Deutsch open and closed barrel terminals, Weather Pack, Metri Pack, and other terminals
Contains:
- 3 Terminal crimping tools
- 1 Open barrel crimping tools for 14-24 gauge wire and seals
- Weather Pack crimping tool
- Weather Pack release tools
- Terminal release tools
Quick View -
HEAVY DUTY BEARING CUP INSTALLER
$209.00Part No: 20300
HEAVY DUTY BEARING CUP INSTALLER
$209.00Accurately install bearing cups in minutes into the Dana/Spicer SPL Life Series quick-disconnect u-joints.
• Three adapters to fit SPL 140, 170, 250 Series drivelines
• Great Partner Tool for Heavy Duty U-Joint Puller (Part No.199) and HD Yoke Puller (Part No. 497)
• Use on quick disconnect universal joint only
• Can be used with hand and air toolsQuick View -
Relay Circuit Pro
$200.74Part No: 76
Relay Circuit Pro
$200.74The 76 Relay Circut Pro tests an entire circuit from the battery to the component in question as well as determining if the relay itself is functioning properly. With the push of a button, the technician the ability to instantly determine the problem with the circuit without the use of a multi-meter. The tool also features easily accessible ports for use with other diagnostic tools.
FEATURES
- Comes in a blow molded case with a high-density foam insert
- Works with both 12 and 24-volt systems
- Patent pending
Quick View