CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Product Categories

Showing 37–48 of 313 results

  • Universal Torsion Bar Unloading Tool

    $130.00

    Part No: 200

    Universal Torsion Bar Unloading Tool

    $130.00

    Use this tool to take the pressure off the torsion bar arm and allow for removal of the torsion bar on GM and non-GM vehicles

    Durable blow-molded case included.

    FEATURES

    • Includes an adapter for using tool on non-GM applications
    • Durable blow-molded case included

    APPLICATIONS:

    • 1988 and up GMC and Chevrolet 1/2-ton, 3/4-ton, and 1-ton trucks
    • 2011 and up GM HD trucks, S-10 Blazers, S-15 Jimmys, and 4WD trucks with 4.3L engines
    • GM K-3500 series with HD chassis, including GM 5-lug, 6-lug, and 8-lug vehicles
    Quick View

  • Brake Bleeder Tank

    $130.00

    Part No: 855

    Brake Bleeder Tank

    $130.00

    FEATURES

    • Lightweight and easy to use
    • Portable tank fills and bleeds both standard and power brakes in a single operation
    • Tank is easily pressurized with just a few strokes of the built-in hand pump eliminating the need for a compressor
    • One 1 gallon capacity features extra long hose quick disconnect coupler shut off valve and pressure gauge

    Includes:

      • One (1) gallon capacity tank
      • Extra-long hose
      • Quick-connect coupler
      • Shut off valve
      • Pressure gauge
    Quick View

  • Alternator Coupler Pulley (ADP) Kit, 22 Piece

    $130.00

    Part No: 750

    Alternator Coupler Pulley (ADP) Kit, 22 Piece

    $130.00

    Used to service both OWC (One-Way Clutch) and OAD (Overrunning Alternator Decoupler) style pulleys.

    FEATURES

    • To remove these pulleys the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counterclockwise depending on the manufacturer. The opposite would be used in the installation
    • OWC’s were first used in 1997 followed by the OAD in 1999. Today more and more vehicle manufacturers are recognizing the performance gains achieved with these pulleys and have designed them into their belt drive systems
    • Will service vehicles included but are not limited to: Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Citroen, Dodge, Fiat, Ford, Honda, Lexus, Mercury, Mercedes-Ben,z Opel, Pontiac, Peugeot, Porsche, Renault, Saturn, Seat, Scion, Toyota, and VW
    Quick View

  • 11 PC OXYGEN SENSOR SOCKET SET

    $125.00

    Part No: 84100CV

    11 PC OXYGEN SENSOR SOCKET SET

    $125.00

    A versatile set is used for the installation and removal of oxygen sensors on most domestic and import vehicles.

    FEATURES

    • Provides a method for removal and installation without damage to sensor
    • Includes the most popular sizes of oxygen sensor sockets
    • Comprised of SAE and metric sizes
    • Blow molded case included

    Includes:
    1/2″ Dr x 29mm x 6pt x 90mm
    3/8″ Dr x 7/8″ x 6pt x 90mm
    1/2″ Dr x 27mm x 12pt x 78mm
    3/8″ Dr x 7/8″ x 6pt x 80mm
    3/8″ Dr x 1″ & 1-1/16 ” x 74mm
    1/2″ Dr x 7/8″  x  50mm
    3/8″ Dr  x  7/8″ x  50mm
    1/2″ Dr x   1″ x  7/8″  6pt
    1/2″ Dr  x  22  x  6pt  x  88mm
    3/8″ Dr  x 22 x  6pt offset, deep
    Sensor Thread Chaser  M18 x 1.5

     

     

    Quick View

  • MASTER LINE DISCONNECT TOOL SET

    $125.00

    Part No: 683

    MASTER LINE DISCONNECT TOOL SET

    $125.00

    FEATURES

    • The most complete disconnect set on the market
    • Comes in a heavy duty case for easy access and easy storage
    • No more random disconnect tools laying around to be lost. All your disconnect needs in one place!
    Quick View

  • 5PC MAGNETIC TOOL BOX TRAY SET

    $124.50

    Part No: 90950CV

    5PC MAGNETIC TOOL BOX TRAY SET

    $124.50

    The 5 piece magnetic toolbox tray set, comes with heavy duty non-marring rubber coated magnets that will not scratch any metal surface applied to. The 6″ (Part #90941CV) and 12″ (Part #90942CV) magnetic shelf trays easily holds fasteners, small parts and tools by any work area. The Magnetic spray can tray (Part #90943CV) easily holds 3 spray cans and 7 various sized screwdrivers, while the pair of magnetic paper towel (Part #90944CV), easily holds a common sized roll of paper towel, roll of shop towels by any work area and the magnetic vinyl glove holding tray (Part #90945CV) helps keep glove boxes neat where you need them the most. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

    • Heavy Duty non-marring rubber coated magnets
    • Industrial Grade powder coating finish resist rust and corrosion
    • Paper Towel holder will adjust any any length roll
    • 3 spray can holder tray with 7 various sized screwdriver holes
    • Adjustable side springs to hold glove boxes in place

    Quick View

  • Ford Triton Spark Plug Extractor Master Set

    $110.65

    Part No: 39500

    Ford Triton Spark Plug Extractor Master Set

    $110.65

    This Tool is used to extract the broken porcelain or seized sleeves from broken spark plugs in 2003 to current Ford Triton Engines.

    In some cases the porcelain will break off in the sleeve and will need to be extracted in order for the 39500 to function effectively.

    Unlike other tools that tell you to push the porcelain through the sleeve (Ford says specifically not to do this), this tool adheres to the porcelain using a special perma-bond and then allows a user to extract the broken porcelain from the sleeve.

    In combination with the porcelain extractor, this combo tool also works to extract frozen and broken off spark plug sleeves for the same model Ford Triton Engines.
    Specially machined guide works with extra long tap and extractor to make sure the job is done easily and quickly.

    Quick View

  • Hydraulic In-line Flaring Tool

    $110.00

    Part No: 166

    Hydraulic In-line Flaring Tool

    $110.00

    Integrates Hydraulic assist to create an easy to use, versatile kit. This time saving tool enables technicians to make perfect flares every time, even in tight access areas for on-car applications. It handles single, double, and bubble flares with the option to expand into quick connect fitting.

    Tubing Sizes: 
    SAE: 3/16″, 1/4″, 5/16″, and 3/8″
    Metric: 4.75mm, 6mm, and 8mm

    • Creates single, double, and bubble flares with the option to expand into quick-connect fittings
    • Includes Constant Tension Tube Cutter

    UPC: 047084001660
    Shipping Weight: 4.35lbs

    166 Hydraulic In Line Flaring Tool Breakdown

    166 – Hydraulic Inline Flaring Tool Bubble Instructions

    Quick View

  • 6PC. DIESEL INJECTOR LINE SOCKET SET

    $109.99

    Part No: 39660CV

    6PC. DIESEL INJECTOR LINE SOCKET SET

    $109.99
    • Designed to loosen and tighten injector lines on most diesel engines
    • Flex head function allow user to apply leverage and access at any desired angle
    •  6PT Crows foot socket prevents fastener round-off
    • 12mm & 14mm flex head sockets come with 3/8″ Dr.
    • 16mm, 17mm, 18mm &19mm flex head sockets come with 1/2″ Dr.
    Quick View

  • Timing Pulley Puller

    $107.20

    Part No: 181

    Timing Pulley Puller

    $107.20
    • Designed for removing drive pulleys with face grooves
    • Removes a pulley absolutely free of any risk of damage
    • Adaptable to different pulley diameters, as the legs are adjustable
    • For removing pulleys with 3, 6, 9 slots
    • Range: 42 -82mm

    UPC: 047084001813
    Shipping Weight: 2.35lbs

    Quick View

  • Intermediate U-Joint Puller

    $105.59

    Part No: 907CV

    Intermediate U-Joint Puller

    $105.59

    The ideal solution for disassembling seized, stubborn U-joints quickly and easily of virtually all cars, light-duty trucks and farm machinery. This piller eliminates dangerous vise-and-socket or hammering removal methods. It will allow the user to remove U-joints without damaging the driveshaft, yokes, joints or bearing cups. It also eliminates the possibility of injury using other unsafe methods. Applications for this tool include U-joints with bearing cups 1.25” to 1.7” O.D. Our pullers are made of high-grade materials to ensure durability and strength.

    • For disassembling seized U-joints of virtually all truck, medium-duty trucks, buses, and farm equipment
    • Applicable to bearing cups 1.25” to 1.7” outer diameter
    • Each component is manufactured from high-grade materials for strength and durability
    • Eliminates the needs to employ dangerous and less effective methods like hammer-and-vise with a higher potential of damaging components

    907 Breakdown

    Quick View

  • BEARING CUP INSTALLER

    $105.33

    Part No: 20200

    BEARING CUP INSTALLER

    $105.33

    FEATURES

    An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this assembly is secured, a second bearing cup is positioned for installation by means of the plunger found at the end of the forcing screw. An impact or hand wrench is applied to the forcing screw, securing the first bearing cup in place and allowing installation of the first retaining clip.

    • Install two bearing cups in one procedure on virtually all medium and light duty U-joints
    • Manufactured from high-grade steel for strength and durability. Simple to use for instant results

    Applications:
    Light Duty to Medium Duty U joints.

    Parts Breakdown:

    20201 C Frame
    20202 Forcing Screw
    20203 Flat Press Adapter
    20204 O Ring

    Dimensions: 11.50″ x 1.85″ x 5.17″

    Quick View