Products
Showing 253–264 of 319 resultsSorted by latest
-
Coil Spring Compressor
$90.11Part No: 510
Coil Spring Compressor
$90.11This tool removes and installs coil springs quickly and safely
- Compress coil springs on all passenger cars and pick-up trucks
- Instructions included
- Not for use with impact tools
This tool should not be used on unusually large coil springs which have a coil outside diameter larger than 5 5/8″ or a wire diameter exceeding 3/4″.
UPC: 047084005101
Shipping Weight: 3.25lbsQuick View -
Bushing Driver Set
$87.91Part No: 504
Bushing Driver Set
$87.91Remove or install bushings from 3/8″ to 1-3/8″ in diameter found in cars, trucks, tractors, construction equipment, electric motors, and many other components containing bushings.
- Includes sixteen bushing adapters ranging from 3/8″ – 1-3/8″, large, medium, and small driver handles.
- Comes in a blow molded storage case.
UPC: 047084005040
Shipping Weight: 3.1lbsQuick View -
Bearing Splitter, 4 1/4″ Capacity
$67.75Part No: 503
Bearing Splitter, 4 1/4″ Capacity
$67.75For removing generator gears, bearing cones, bearings, and similar parts that ordinary puller jaws cannot reach.
- 4-1/4″ capacity
- Knife edges are flush on one side for easy pulling
- Bolts are heat treated for added strength
UPC: 047084005033
Shipping Weight: 1lbQuick View -
5-Ton Bar Type Puller Bearing Separator Set
$148.22Part No: 502CV
5-Ton Bar Type Puller Bearing Separator Set
$148.22This set includes two of our most popular bearing splitters (2″ and 3″), four sets of hex push-puller legs, and a bar-type puller head with a 9/16″ forcing screw. Separator tools can be used with bar puller and legs for a wide variety of pulling jobs. The 5″ puller cross-bar with a 6-1/4″ forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools.
- Includes a 2″ and 3″ puller
- Includes 4 sets of hex push-puller legs
- Separator tools can be used with bar pullers and legs or by themselves
- 5″ puller cross-bar can be used separately or in combination with pullers
UPC: 047084005026
Shipping Weight: 10.3lbsQuick View -
7-Ton Bar Type Puller Bearing Separator Set
$192.22Part No: 501CV
7-Ton Bar Type Puller Bearing Separator Set
$192.22This Puller/bearing separator set was created for difficult jobs. With the capacity for larger applications up to 7-tons, it also has a greater reach of 8 to 16 inches.
- Includes a Bearing Splitter with 4″ capacity, two sets of hex push puller legs, and an 8″ bar-type puller head mated with a custom thread forcing screw
- Professionals have a Puller-Bearing set for hard jobs up to 7-tons
- Larger applications and a greater reach 8″ to 16″
UPC: 047084005019
Shipping Weight: 17.05lbsQuick View -
Twin Spin Drive Converter 3/8″ – 1/2″
$21.19Part No: 489
Twin Spin Drive Converter 3/8″ – 1/2″
$21.19- Can be used to use a 3/8″ drive socket on a 1/2″ ratchet or a 1/2″ drive socket on a 3/8″ ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
UPC: 047084004890
Shipping Weight: .3lbs489 Twin Spin Drive Converter Flyer
Also available:
488 – Twin Spin Drive Converter 1/4″ – 3/8″Quick View -
Twin Spin Drive Converter 1/4″ – 3/8″
$20.27Part No: 488
Twin Spin Drive Converter 1/4″ – 3/8″
$20.27- Can be used to use a 1/4″ drive socket on a 3/8″ ratchet or a 3/8″ drive socket on a 1/4″ ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
UPC: 047084004883
Shipping Weight: .45lbsAlso available:
489 – Twin Spin Drive Converter 3/8″ – 1/2″Quick View -
90 Degree Gearless Angle Drive 3/8″
$17.58Part No: 483
90 Degree Gearless Angle Drive 3/8″
$17.58- Allows access to hard to reach areas.
- Replaces hard to use universal adapters.
- Exceeds ANSI specs torque max for universal socket adapters.
- Patented
UPC: 047084004838
Shipping Weight: .45lbsAlso available:
482 – 90 Degree Gearless Angle Drive 1/4″
485 – 45 Degree Gearless Angle Drive 1/4″Quick View -
90 Degree Gearless Angle Drive 1/4″
$17.58Part No: 482
90 Degree Gearless Angle Drive 1/4″
$17.58- Allows access to hard to reach areas.
- Replaces hard to use universal adapters.
- Exceeds ANSI specs torque max for universal socket adapters.
- Patented
UPC: 047084004821
Shipping Weight: .3lbsAlso available:
483 – 90 Degree Gearless Angle Drive 3/8″
485 – 45 Degree Gearless Angle Drive 1/4″Quick View -
Tight Access Drive Wrench
$35.16Part No: 450
Tight Access Drive Wrench
$35.16A gear-driven metric wrench set solution to gain easy access to tight areas where a box type wrench would not be practical.
- Dramatically reduce time needed to remove fasteners in awkward areas.
- Comes in a set of five 10mm, 12mm, 13mm, 14mm, 15mm
- Comes in a blow molded case.
- Includes adapter for use with 3/8″ sockets.
- Patented
UPC: 047084004500
Shipping Weight: 3.35lbs.Quick View -
Fluted Screw Extractor Set
$18.68Part No: 441
Fluted Screw Extractor Set
$18.68Made from forged alloy steel, this this tapered style extractor can be used to extract broken studs, screws, pipe and pipe fittings.
- Has gradual taper and long flutes.
- Available as individuals:
Part 441-1 – For Removing Screw/Stud/Bolt – 1/4″, 5/16″
Part 441-2 – For Removing Screw/Stud/Bolt – 3/8″
Part 441-3 – For Removing Screw/Stud/Bolt – 7/16″
Part 441-4 – For Removing Screw/Stud/Bolt – 1/2″, 9/16″
Part 441-5 – For Removing Screw/Stud/Bolt – 5/8″
UPC: 047084004418
Shipping Weight: .3lbsQuick View -
4 PC Spiral Screw Extractor Set
$16.79Part No: 438
4 PC Spiral Screw Extractor Set
$16.79Made from forged alloy steel, this spiral style extractor can be used to extract broken studs or screws.
- Correct drill size for hole in part to be extracted is indicated on the tool.
- Available as individuals:
Part 431 – For Removing Screws Shank – 3/16″
Part 432 – For Removing Screws Shank – 1/4″
Part 433 – For Removing Screws Shank – 5/16″
Part 434 – For Removing Screws Shank – 7/16″
UPC: 047084004388
Shipping Weight: .2lbsQuick View