CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Products

Showing 1–12 of 283 results

  • DUAL VIEW WIFI BORESCOPE

    $189.99

    Part No: 86

    DUAL VIEW WIFI BORESCOPE

    $189.99

    Most borescopes use mirrors to achieve alternate viewing angles. Our newest borescope utilizes dual hi-res cameras, bright LED illumination, and up to three times zoom to give users superior viewing and video capture capabilities.

    • Hi-Res 1080p cameras provide front and side video and image capture
    • The camera, lens, and cable are IP 67 rated water resistance
    • Ultra-bright lighting provided by seven total LEDs
    • This unit transmits and connects to devices via an independent Wi-Fi signal, giving it the freedom to be used everywhere

     

    Quick View
  • Drop and Drive

    $18.86

    Part No: 494

    Drop and Drive

    $18.86

    Presenting the patented magnetic bit driver with a guide that retracts and extends on its own every time, unlike any driver on the market! For use anywhere, inside and out, from putting up drywall and cement board to hanging sheathing or installing decking. Reloads faster, drop the fastener in and drive it.

    FEATURES

    • Spring-loaded bit adapter that guides it drives
    • Guide will not only retract but will also extend back
    • Guide locks to easily interchange bits
    • Internal magnet holds bits in place
    • For use with power tools including impact drivers
    • Accepts existing, common ¼” hex bits
    • Backed by a limited lifetime warranty
    Quick View
  • Intermediate Pitman Arm Puller

    $171.63

    Part No: 18640

    Intermediate Pitman Arm Puller

    $171.63

    Our Intermediate Pitman Arm Puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from the steering gear found on many medium-duty vehicles.

    • Replaces less effective, dangerous, and often destructive methods used for removing pitman arms
    • Constructed of high-strength materials for increased pulling power and superior durability
    • Rated for usage with up to a ½” drive impact wrench
    • Simple and effective design wide a wide application range

    Applications: Heavy-duty pickups (1-ton and 2-ton), medium-duty trucks, box trucks, cab-and-chassis, and school buses

    Warranty: Limited Lifetime Against Defects

    Quick View
  • Sheppard M110 Pitman Arm Puller

    $213.28

    Part No: 18630

    Sheppard M110 Pitman Arm Puller

    $213.28

    The M110 Pitman Arm Puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from Sheppard M110 steering gears found on many class 6 –8 vehicles.

    • Replaces less effective, dangerous, and often destructive methods used for removing pitman arms
    • Constructed of high-strength materials for increased pulling power and superior durability
    • Rated for usage with up to a ¾” drive impact wrench
    • Simple and effective design with a wide application range

    Applications: Class 6 –8 vehicles, including but not limited to highway transportation vehicles, buses, RVs, and other equipment

    Warranty: Limited Lifetime Against Defects

    Quick View
  • Sheppard M100 Pitman Arm Puller

    $123.48

    Part No: 18620

    Sheppard M100 Pitman Arm Puller

    $123.48

    Our M100 Pitman Arm Puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from Sheppard M100 steering gears found on many class 6 –8 vehicles.

    • Replaces less effective, dangerous, and often destructive methods used for removing pitman arms
    • Constructed of high-strength materials for increased pulling power and superior durability
    • Rated for usage with up to a ¾” drive impact wrench
    • Simple and effective design with a wide application range

    Applications: Class 6 –8 vehicles, including but not limited to highway transportation vehicles, buses, RVs, and other equipment

    Warranty: Limited Lifetime Against Defects

    Quick View
  • Ford & Mazda Crankshaft Holder

    $103.16

    Part No: 38100

    Ford & Mazda Crankshaft Holder

    $103.16

    A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt on many popular Ford and Mazda vehicles, or it can be used to turn the engine when doing timing work.

    • Adapter securely fits the crankshaft tokeep it from rotating when loosening the pulley bolt
    • The ½” drive tab allows for the use of a ratchet or breaker bar
    • Ideal for timing-related jobs
    • Heavy-duty construction and a rust resistant finish

    Applications: Ford/Mazda 2005 2011 2.0L/2.3L/2.5L (including some Mercury and Volvo applications) (Hybrid models also)

    Models: (Ford) Focus, Fusion, Escape, Ranger, Transit; (Mazda) MX 2,MX 3, MX 5, MX 6; CX 5, CX 9; (Mercury) Milan, MKZ, Mariner

    Warranty: Lifetime Against Defects

    Quick View
  • Ford Harmonic Balancer Holder

    $46.68

    Part No: 38110

    Ford Harmonic Balancer Holder

    $46.68

    A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt-on popular Ford engines, or it can be used to turn the engine when doing timing work.

    • Designed to fit multiple Ford vehicles ranging from 1992 to 2016
    • The adapter securely fits the crankshaft to keep it from rotating when loosening the pulley bolt
    • The ½” drive knockout allows for the use of a ratchet or breaker bar
    • Ideal for rotating the engine for timing-related jobs
    • Will not warp balancer
    • Heavy-duty construction
    Quick View
  • Snap Ring Pliers- straight 49

    $28.97

    Part No:

    Snap Ring Pliers- straight 49

    $28.97

    Strong enough to remove U-joint snap rings with the precision for plastic clips
    on interior and body panels, these pliers are available in both 75˚offset (48)
    and straight design (49).

    FEATURES

    • Designed for removing U-joint snap rings
    • Great for removing interior clips and body panel fasteners
    • 75˚ offset head (48) for use in confined areas

     

    Quick View
  • Snap Ring Pliers- 75˚offset 48

    $31.08

    Part No:

    Snap Ring Pliers- 75˚offset 48

    $31.08

    Strong enough to remove U-joint snap rings with the precision for plastic clips
    on interior and body panels, these pliers are available in both 75˚offset (48)
    and straight design (49).

    FEATURES

    • Designed for removing U-joint snap rings
    • Great for removing interior clips and body panel fasteners
    • 75˚ offset head (48) for use in confined areas
    Quick View
  • Adjustable Indexing Trim Clip Pliers

    $62.02

    Part No: 54

    Adjustable Indexing Trim Clip Pliers

    $62.02

    FEATURES

    • Removes plastic anchors with center pins without damage to the pin or the anchor with one-handed operation
    • Adjustable head design allows access to difficult or otherwise unreachable areas when trying to use other similar pliers
    • Steel construction with a double-dipped textured, grip
    Quick View
  • Universal Torsion Bar Unloading Tool

    $150.79

    Part No: 200

    Universal Torsion Bar Unloading Tool

    $150.79

    Use this tool to take the pressure off the torsion bar arm and allow for removal of the torsion bar on GM and non-GM vehicles

    Durable blow-molded case included.

    FEATURES

    • Includes an adapter for using tool on non-GM applications
    • Durable blow-molded case included

    APPLICATIONS:

    • 1988 and up GMC and Chevrolet 1/2-ton, 3/4-ton, and 1-ton trucks
    • 2011 and up GM HD trucks, S-10 Blazers, S-15 Jimmys, and 4WD trucks with 4.3L engines
    • GM K-3500 series with HD chassis, including GM 5-lug, 6-lug, and 8-lug vehicles
    Quick View
  • Bearing Cup Installer

    $105.33

    Part No: 20200

    Bearing Cup Installer

    $105.33

    FEATURES

    An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this assembly is secured, a second bearing cup is positioned for installation by means of the plunger found at the end of the forcing screw. An impact or hand wrench is applied to the forcing screw, securing the first bearing cup in place and allowing installation of the first retaining clip.

    • Install two bearing cups in one procedure on virtually all medium and light duty U-joints
    • Manufactured from high-grade steel for strength and durability. Simple to use for instant results

    Applications:
    Light Duty to Medium Duty U joints.

    Parts Breakdown:

    20201 C Frame
    20202 Forcing Screw
    20203 Flat Press Adapter
    20204 O Ring

    Dimensions: 11.50″ x 1.85″ x 5.17″

    Quick View