CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Products

Showing 13–24 of 282 results

  • Ford Harmonic Balancer Holder

    $46.68

    Part No: 38110

    Ford Harmonic Balancer Holder

    $46.68

    A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt-on popular Ford engines, or it can be used to turn the engine when doing timing work.

    • Designed to fit multiple Ford vehicles ranging from 1992 to 2016
    • The adapter securely fits the crankshaft to keep it from rotating when loosening the pulley bolt
    • The ½” drive knockout allows for the use of a ratchet or breaker bar
    • Ideal for rotating the engine for timing-related jobs
    • Will not warp balancer
    • Heavy-duty construction
    Quick View

  • Snap Ring Pliers- straight 49

    $28.97

    Part No:

    Snap Ring Pliers- straight 49

    $28.97

    Strong enough to remove U-joint snap rings with the precision for plastic clips
    on interior and body panels, these pliers are available in both 75˚offset (48)
    and straight design (49).

    FEATURES

    • Designed for removing U-joint snap rings
    • Great for removing interior clips and body panel fasteners
    • 75˚ offset head (48) for use in confined areas

     

    Quick View

  • Snap Ring Pliers- 75˚offset 48

    $31.08

    Part No:

    Snap Ring Pliers- 75˚offset 48

    $31.08

    Strong enough to remove U-joint snap rings with the precision for plastic clips
    on interior and body panels, these pliers are available in both 75˚offset (48)
    and straight design (49).

    FEATURES

    • Designed for removing U-joint snap rings
    • Great for removing interior clips and body panel fasteners
    • 75˚ offset head (48) for use in confined areas
    Quick View

  • Adjustable Indexing Trim Clip Pliers

    $62.02

    Part No: 54

    Adjustable Indexing Trim Clip Pliers

    $62.02

    FEATURES

    • Removes plastic anchors with center pins without damage to the pin or the anchor with one-handed operation
    • Adjustable head design allows access to difficult or otherwise unreachable areas when trying to use other similar pliers
    • Steel construction with a double-dipped textured, grip
    Quick View

  • Universal Torsion Bar Unloading Tool

    $150.79

    Part No: 200

    Universal Torsion Bar Unloading Tool

    $150.79

    Use this tool to take the pressure off the torsion bar arm and allow for removal of the torsion bar on GM and non-GM vehicles

    Durable blow-molded case included.

    FEATURES

    • Includes an adapter for using tool on non-GM applications
    • Durable blow-molded case included

    APPLICATIONS:

    • 1988 and up GMC and Chevrolet 1/2-ton, 3/4-ton, and 1-ton trucks
    • 2011 and up GM HD trucks, S-10 Blazers, S-15 Jimmys, and 4WD trucks with 4.3L engines
    • GM K-3500 series with HD chassis, including GM 5-lug, 6-lug, and 8-lug vehicles
    Quick View

  • Bearing Cup Installer

    $105.33

    Part No: 20200

    Bearing Cup Installer

    $105.33

    FEATURES

    An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this assembly is secured, a second bearing cup is positioned for installation by means of the plunger found at the end of the forcing screw. An impact or hand wrench is applied to the forcing screw, securing the first bearing cup in place and allowing installation of the first retaining clip.

    • Install two bearing cups in one procedure on virtually all medium and light duty U-joints
    • Manufactured from high-grade steel for strength and durability. Simple to use for instant results

    Applications:
    Light Duty to Medium Duty U joints.

    Parts Breakdown:

    20201 C Frame
    20202 Forcing Screw
    20203 Flat Press Adapter
    20204 O Ring

    Dimensions: 11.50″ x 1.85″ x 5.17″

    Quick View

  • Bolt Retained Cup Installer

    $48.65

    Part No: 18510

    Bolt Retained Cup Installer

    $48.65

    Makes fast and easy work of installing bolt retained bearing cups of 1610 to 1880 universal joints commonly found of class 6 8 vehicles. Uses the bolt holes of the flange to ensure proper alignment of the cup and eliminates damage often caused by common installation methods.

    • Easily and quickly installs the U joint bearing cups on series 1610 1880 yokes on class 6 8 vehicles
    • Two guide bolts, utilizing the bolt holes of the yoke, to effortlessly achieve the proper alignment every time
    • Eliminates damage to cups, seals, or needle bearings

    Applications:
    1610 1880 Series full round yokes/Class 6 8 vehicles

    Components:
    18511 Bolt Retained Body
    18512 Center Screw
    18513Guide Bolts (2)

    Quick View

  • 45° Universal Hose Clamp Pliers

    $56.99

    Part No: 58

    45° Universal Hose Clamp Pliers

    $56.99

    There are times when removing a clamp is more difficult than it should be, and you shouldn’t need a handful of pliers until you find the right one. These hose clamps pliers cover nearly all the clamps with one tool and give better access than standard pliers.
    – Angled head and extra-long reach to allow access to even some of the most obstructed clamps.
    – Special tip designed to grip almost any hose clamp from any direction.
    – Locking ratcheted jaws enable the user to keep pliers locked onto clamps.
    – Great for coolant tank ventilation line clamps, radiator hose clamps, transmission cooler lines, and other applications.

    Quick View

  • Ratcheting Harmonic Balance Puller

    $101.03

    Part No: 38000

    Ratcheting Harmonic Balance Puller

    $101.03

    Remove harmonic balancers without the hassle of trying to start bolts or the frustration of positioning multi-jointed puller legs.

    • Three ratcheting legs with puller feet eliminate the need for bolts
    • No need to remove the radiator or other components with this compact design
    • Legs quickly adjust and hold their position
    • Push turn click design
    • Dimensions: 3.7 6 ” x 4.8 2 ” x 3.6 5

    Applications:
    FORD 5.0 Coyote
    GM 5.3L, 5.7(LS1), 6.0(LS2), 6.2(LS3), and 7.0L
    MISC Most three and six spoke harmonic balancers/pulleys

    Parts Breakdown:
    38001
    Ratcheting Yoke
    38002
    Forcing Screw
    38003
    Harmonic Jaws 3 Pcs.
    38004 Flat Press Adaptor with O Ring

    Quick View

  • Light Duty Slide Hammer and Puller Set, 14 Piece

    $90.00

    Part No: 49700

    Light Duty Slide Hammer and Puller Set, 14 Piece

    $90.00

    A versatile tool that can be used in many ways. The 2 lb slide hammer and an array of attachments can be utilized to aid in pulling seals, bearings, pressed studs, or even for straightening body panels.

    • Slide hammer and accessories can be used in many applications
    • Capable of inside spreads from 3/8″ to 1 ¼“ and outer spreads up to 3″
    • Puller reaches depths up to 2 ½”All components are in a blow-molded case for easy storage and organization

    Components:
    49701 Slide Hammer
    49702 Threaded Rod
    49703 Screw Adapter
    49704 Square Hook
    49705 Jaw Adapter
    49706 Two-Jaw Puller
    49707 Hook Puller
    49708 Locking Pins
    49709 Cone Rod
    49710 Small Jaws (2 pcs)
    49711 Large Jaws (2 pcs)
    49712 T-Handle
    49713 Blow-Molded Storage Case

    Out of stock

    Quick View

  • 3 Piece Non-Marring Pick Set

    $8.11

    Part No: 112

    3 Piece Non-Marring Pick Set

    $8.11

    While metal picks can be useful, they often cause accidental damage like scratching a soft surface. This pick set is a balance of strength and forgiveness.

    •Access hard-to-reach areas such as panels, remove O-rings, clips, and small seals and gaskets
    •Diverse usage ranging from engine work to interiors
    •Ideal for intricate jobs and when working with delicate surfaces

    Components:
    112-1Small Non-Marring Pick
    112-2Large Non-Marring Pick
    112-3Straight Non-Marring Pick
    Vinyl Pouch

    Quick View

  • Light Bulb Pliers

    $13.59

    Part No: 47

    Light Bulb Pliers

    $13.59

    Removing or installing small automotive bulbs should not be a hassle. They are fragile and easily broken. Sometimes it is hard to reach a bulb with just your fingers. The other concern could be corrosion. These pliers make it easy to handle small bulbs in any scenario, and the extended bulb grippers give you the ability to get into hard-to-reach areas.

    •Fits most mini and small bulbs
    •Rubber-coated tips designed to grip bulbs safely
    •Extended reach for recessed, corroded, and broken bulbs
    •Scissor design for easy handling
    •Cushioned grips

    Applications:
    Mini and some small bulb sizes

    Quick View