Products
Showing 265–276 of 310 results
-
Parts Cleaning Brush
$6.28Part No: 264
Parts Cleaning Brush
$6.28FEATURES
- For heavy duty cleaning of metal and masonry surfaces.
- 6in brush length with 14-in overall length.
Quick View -
One Man Brake Bleeder
$6.65Part No: 24700
One Man Brake Bleeder
$6.65FEATURES
- Simple design for ease of use.
- No springs no diaphragms no moving parts no connections to leak and no way air can re-enter the system once the brake pedal is released.
- Instructions included.
Quick View -
Ball Joint Super Set
$370.00Part No: 197
Ball Joint Super Set
$370.00FEATURES
- This set allows for the removal and installation of press-fit ball joints on many GM and Ford light-duty trucks vans and SUVs through 2003; Dodge light trucks through 1998; Dodge vans Durango and Dakota through 2003; and Honda Accord Civic del Sol and Prelude through 2001.
- C-frame tool can be used alone to remove and replace universal joints
- Comes complete in durable case
Quick View -
Ball Joint Super Set
$193.89Part No: 196
Ball Joint Super Set
$193.89Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins
FEATURES
Contains:
- 3 receiver tubes
- 2- 3/4″ ID X 3″ OD
- 2- 1/4″ ID x 2 1/2″ OD
- 1- 3/4″ ID X 2″ OD
- Installation and removing adapters
- 1 installing cup
- 1 receiving cup
- 1 installing adapter
Quick View - 3 receiver tubes
-
Power Steering Pump Remover and Installer Kit
$73.77Part No: 195
Power Steering Pump Remover and Installer Kit
$73.77FEATURES
- This kit has nearly everything you need to remove and install power steering pump pulleys in Chrysler Ford and GM vehicles with Saginaw Thompson and Ford C111 and C2 power steering pumps.
- Fits 11⁄8“, 11⁄4“, 15⁄16“, and 13⁄8“” pulley hub diameters including 1988-newer GM cars equipped with Quad 4 engines; 1991-94 GM 3.1L V6; 1991-newer 3800 V6 engines; 1994-newer GM 3100 V6; 1999-newer GM 3400 V6 and 1992-newer Ford Crown Victoria and Mercury Grand Marquis with 4.6 V8 engine 1997-newer Ford truck with 4.2 & 4.6 V6, 5.4 V8, and 6.8 V10 engines.
Quick View -
Harmonic Balancer Puller
$28.03Part No: 189
Harmonic Balancer Puller
$28.03FEATURES
- Designed to pull balancers vibration dampers pulleys and gears with tapped holes.
- Four slots in yoke allows tool to be used in both two and three hole applications.
- Removable floating swivel prevents damage to shaft.
- Yoke is forged from high grade alloy steel and heat treated
Quick View -
Steering Wheel Puller
$30.35Part No: 187
Steering Wheel Puller
$30.35FEATURES
- This tool is designed to pull steering wheels on all major makes of automobiles.
- 5⁄8in x 4in center screw is equipped with a floating swivel to prevent damage to horn wire connections.
- Five sets of side screws provided.
Quick View -
Pitman Arm Puller
$35.80Part No: 186
Pitman Arm Puller
$35.80FEATURES
- Heavy duty tool is designed to remove pitman arms from late model cars and light trucks.
- Yoke is forged from high grade alloy steel and heat treated.
- 1 5⁄16” opening 21⁄2” pull.
Quick View -
Front End Service Kit
$150.00Part No: 185
Front End Service Kit
$150.00The Front End Service Kit Includes five tools used in the servicing of ball joints, pitman arms, and tie rods on most vehicles.
FEATURES
Contains:
- A large and small Pitman arm puller for ball Joint applications.
- Three different tie rod pullers.
- Two ball joint separators.
- Comes in a sturdy blow molded case
Quick View -
Master In-Line Flaring Set
$75.00Part No: 165
Master In-Line Flaring Set
$75.00FEATURES
- The In-Line Flaring Tools unique design locks the adapters cone and tube in a perfect line making perfect factory flares every time with less risk of breaking adapters.
- With the clamp and set screws putting pressure directly over the tube you greatly reduce the chance of the tube slipping from the clamp. Also this increases the overall life of the clamp by not wearing down the teeth inside from repeated slipping.
- The slender low profile design of this tool allows the user to make flares on the vehicle and in tight spaces. Flares can be achieved along frame rails or areas in the engine compartment saving the user time from having to remove components or complete lines to make repairs.
- Set includes everything needed to do the following:
- 3⁄16“, 5⁄16“, 3⁄8” Double and Single Flares
- 4.75mm, 6mm, 8mm Double and Bubble Flares
Quick View -
Double Flaring Tool
$55.00Part No: 163
Double Flaring Tool
$55.00FEATURES
- This 45 degree double flaring tool set is designed to withstand the high pressure necessary to double flare soft steel tubing as well as single flare soft copper aluminum and brass tubing.
- Includes: Five (5) double flare adapters drop forged compressor yoke and bar assembly w/ size capacity – 3⁄16in, 1⁄4in, 5⁄16in, 3⁄8in, and 1⁄2.
- Also available in Metric w/ size capacity- 4.15mm, 5mm, 6mm, 8mm, and 10mm. (153)
Quick View -
In-Line Flaring Tool Auto-Specific Set
$24.00Part No: 161
In-Line Flaring Tool Auto-Specific Set
$24.00FEATURES
- Make Perfect Flares Every Time!
- Use to make single and double flares
- The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping keeps flares centered and makes the job of flaring easier. Superior to bar type flaring tools.
- Low profile design allows for use on or off the vehicle
- Designed to be used with a ratchet to make flares easier
- In line design makes a more accurate flare
- Double clamp and hex screw design keeps tubing locked tightly in position
- For use on thin walled steel and copper tubing
- Available in SAE 164 Metric 154 and Auto-Specific Set 161
- Patent Pending
Quick View
