CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Products

Showing 241–252 of 310 results

  • Coil Spring Compressor

    $82.00

    Part No: 510

    Coil Spring Compressor

    $82.00

    FEATURES

    • This tool removes and installs coil springs quickly and safely
    • Compress coil springs on all passenger cars and pick-up trucks
    • Instructions included
    • Not for use with impact tools

    This tool should not be used on unusually large coil springs which have a coil outside diameter larger than 5 5/8″ or a wire diameter exceeding 3/4″.

     

    Quick View

  • Bushing Driver Set

    $80.00

    Part No: 504

    Bushing Driver Set

    $80.00

    FEATURES

    • Remove or install bushings from 3⁄8” to 13⁄8” in diameter. Found in cars trucks tractors construction equipment electric motors and many other components containing bushings.
    • Includes sixteen bushing adapters ranging from 3⁄8” to 13⁄8” large medium and small driver handles.
    • Comes in a blow-molded storage case.
    Quick View

  • Bearing Splitter, 4 1/4″ Capacity

    $61.65

    Part No: 503

    Bearing Splitter, 4 1/4″ Capacity

    $61.65

    FEATURES

    • For removing generator gears bearing cones bearings and similar parts that ordinary puller jaws cannot reach.
    • Knife edges are flush on one side for easy pulling. Bolts are heat treated for added strength.
    • No. 503 Bearing Splitter for use with Puller
    • No. 943 Capacity: 0″ to 41⁄4” (108mm) 5⁄8, 18 Holes
    Quick View

  • Puller Bearing Separator Set, 5 Ton/ Bar Type

    $134.88

    Part No: 502

    Puller Bearing Separator Set, 5 Ton/ Bar Type

    $134.88

    FEATURES

    • Set includes two popular bearing splitters (2″ and 3″), four sets of hex push-puller legs, and a bar-type puller head with a 9/16″ forcing screw
    • Separator tools are used with bar puller and legs for a wide variety of pulling jobs
    • The 5″ puller cross-bar with a 6-1/4″ forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools
    Quick View

  • 7-Ton Bar Type Puller Bearing Separator Set

    $174.92

    Part No: 501

    7-Ton Bar Type Puller Bearing Separator Set

    $174.92

    FEATURES

    • Includes a Bearing Splitter with 4″ capacity two sets of hex push puller legs a 8″ bar type puller head mated with a custom thread forcing screw
    • Professionals have a Puller-Bearing set for hard jobs up to 7-tons larger applications and a greater reach 8″ to 16″
    Quick View

  • Twin Spin Drive Converter 3/8″ – 1/2″

    $19.28

    Part No: 489

    Twin Spin Drive Converter 3/8″ – 1/2″

    $19.28

    FEATURES

    • Can be used to use a 3/8 in. drive socket on a 1/2in. ratchet or a 1/2in. drive socket on a 3/8in. ratchet.
    • Can withstand higher torque than traditional adapters.
    • Can be used as a small extension or hand drive for tight access.
    • Patented

    Available on backorder

    Quick View

  • Twin Spin Drive Converter 1/4″ – 3/8″

    $18.45

    Part No: 488

    Twin Spin Drive Converter 1/4″ – 3/8″

    $18.45

    FEATURES

    • Can be used to use a 1/4 in. drive socket on a 3/8in. ratchet or a 3/8in. drive socket on a 1/4in. ratchet.
    • Can withstand higher torque than traditional adapters.
    • Can be used as a small extension or hand drive for tight access.
    • Patented
    Quick View

  • 90 Degree Gearless Angle Drive 3/8″

    $16.00

    Part No: 483

    90 Degree Gearless Angle Drive 3/8″

    $16.00

    FEATURES

    • Allows access to hard to reach areas.
    • Replaces hard to use universal adapters.
    • Exceeds ANSI specs torque max for universal socket adapters.
    • Patented
    Quick View

  • 90 Degree Gearless Angle Drive 1/4″

    $16.00

    Part No: 482

    90 Degree Gearless Angle Drive 1/4″

    $16.00

    FEATURES

    • Allows access to hard to reach areas.
    • Replaces hard to use universal adapters.
    • Exceeds ANSI specs torque max for universal socket adapters.
    • Patented
    Quick View

  • 1/2″ Drive Extendable Breaker Bar

    $69.00

    Part No: 480

    1/2″ Drive Extendable Breaker Bar

    $69.00

    FEATURES

    • Extends from 15 to 25
    • Excellent for mobile technicians allowing them to fit the bar in regular carry tool boxes.
    • Tested in Independent lab to destruction of 6800 inch pounds. Some tested as high as 8000 inch pounds.
    • Patented
    Quick View

  • Tight Access Drive Wrench

    $32.00

    Part No: 450

    Tight Access Drive Wrench

    $32.00

    FEATURES

    • A gear-driven metric wrench set solution for tight access areas!
    • Gear driven to gain easy access to tight areas where a box type wrench would not be practical.
    • Dramatically reduce time needed to remove fasteners in awkward areas.
    • Comes in a set of five 10mm, 12mm, 13mm, 14mm, 15mm w-blow molded case.
    • Includes adapter for use with 3⁄8” sockets.
    • A real time saver.
    • Patented.
    Quick View

  • Fluted Screw Extractor Set

    $17.00

    Part No: 441

    Fluted Screw Extractor Set

    $17.00

    FEATURES

    • Forged alloy steel this this tapered style extractor can be used to extract broken studs screws pipe and pipe fittings.
    • Has gradual taper and long flutes.
    • Available as individuals:
      No. 441-1 – For Removing Screw/Stud/Bolt 1⁄4, 5⁄16
      No. 441-2 – For Removing Screw/Stud/Bolt 3⁄8
      No. 441-3 – For Removing Screw/Stud/Bolt 7⁄16
      No. 441-4 – For Removing Screw/Stud/Bolt 1⁄2, 9⁄16
      No. 441-5 – For Removing Screw/Stud/Bolt 5⁄8
    Quick View