CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Product Categories

  • Constant Tension Tube Cutter, 3/16″ – 7/8″

    Constant Tension Tube Cutter, 3/16″ – 7/8″

    $30.77

    Part No: 157

    Constant Tension Tube Cutter, 3/16″ – 7/8″

    $30.77

    The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.

    • Cuts a range of tubing sizes from 3/16″ to 7/8″
    • Spring loaded tube cutter
    • Replaceable blade, part #157-600
    • Patented design

    UPC: 047084001578
    Shipping Weight: .4lbs

    157 Constant Tension Tube Cutter Flyer

    Also available:
    158 Constant Pressure Tube Cutter 1/8″ – 1-1/8″
    159 Mini-Mini Constant Tension Tube Cutter

    Quick View
  • 18″ Urethane Cut Out Knife

    18″ Urethane Cut Out Knife

    $30.77

    Part No: 26

    18″ Urethane Cut Out Knife

    $30.77
    • This heavy duty windshield knife gives that extra reach to cut hardened urethane down to the dash line.
    • Constructed of heavy duty steel and aluminum and a padded ergonomic handle.
    • 18″ overall length.
    • No. 356-1 Replacement Blade

    UPC: 047084000267
    Shipping Weight: .75lbs

    Quick View
  • Magnetic Field Indicator

    Magnetic Field Indicator

    $30.76

    Part No: 82000CV

    Magnetic Field Indicator

    $30.76

    A quick and easy way to detect magnetic fields. Just place the tip of the probe on any AC, DC, or permanent magnet, and it will illuminate if a magnetic field is present.

    • Diagnose electrical solenoid valves in automotive applications or on pneumatic and hydraulic equipment
    • Use to test various solenoids and coiled relays common in many vehicles, oil burners, and machinery
    • Can even be used to check audio speaker magnets
    • It includes an integrated tester magnet to ensure the device is always working
    • Immediately verify an active or inactive ignition coil by putting the tip near the coil.
    • A blue LED light will display every time a magnetic field is detected.
    • The test tip has a built-in LED flashlight

    UPC: 047084820001
    Shipping weight: .11lbs

    82000 – Magnetic Field Indicator Flyer

     

    Available on backorder

    Quick View
  • Multi-Functional Push Pin & Clip Pliers

    Multi-Functional Push Pin & Clip Pliers

    $30.76

    Part No: 68700CV

    Multi-Functional Push Pin & Clip Pliers

    $30.76

    The 68700, is designed with an angled head to easily remove multiple types of push pins and trim clips found on most vehicles. Equipped with a cutting function and hole design to grip plastic fasteners without cutting head off. Ergonomic dip handles for a comfortable grip and an added spring to prevent hand fatigue during long periods of use.

    • Angled head equipped with a diagonal cutting function and hole design to grip plastic fasteners
    • Easily removes multiple types of push pins and trim clips found on most vehicles
    • Removes nails and rivet puller
    • Ergonomic dip handles for a comfortable grip
    • Added spring prevents hand fatigue

    UPC: 047084687000
    Shipping weight: .5lbs

    68700 Precision Panel Clip Pliers Flyer

    Quick View
  • 1/2″ Dr. 4 Lug Spindle Nut Socket

    1/2″ Dr. 4 Lug Spindle Nut Socket

    $29.99

    Part No: 83960CV

    1/2″ Dr. 4 Lug Spindle Nut Socket

    $29.99

    The 4 Lug Spindle Nut Socket is specially designed to remove and install 4 slot axle nut sockets found in Dana 44, Dana 50 and Dana 60 front axles, 1/2-to-3/4-ton trucks. Will also work on Ford trucks with ratcheting type lock nuts on front axles.

    • Remove and install 4 slotted axle lock nuts
    • ½” drive
    • Fits front wheel retaining nut on Dana 44 series axle, 1959 and later, Dana 50 and Dana 60 front axles
    • 1/2-ton vehicles with manual locking nuts
    • Not for use with power tools
    • Will also work on Ford trucks with ratcheting type lock nuts on front axles

    UPC: 047084839607
    Shipping weight: 1.75lbs

    83960CV 4 Lug Spindle Nut Socket Flyer

    Quick View
  • Hub Resurfacing Kit

    Hub Resurfacing Kit

    $29.67

    Part No: 332

    Hub Resurfacing Kit

    $29.67

    The Hub Resurfacing Kit fits your power drill to quickly sand rust off lug studs and rotors on the hub assembly.

    • Sanding pads conveniently attach with half turn thread.
    • Can be used for domestic and import vehicles with either front or rear disc brakes.
    • Kit comes complete with a holder and five sanding discs.
    • For best results, the device should be operated at speeds of 10,000 rpm or less.

    UPC: 047084003329
    Shipping Weight: .25lbs

    332 Wheel Hub Resurfacing Kit Replacement Parts

    332 Wheel Hub Resurfacing Kit Flyer

    Quick View
  • Mini-Mini Constant Tension Tube Cutter

    Mini-Mini Constant Tension Tube Cutter

    $29.67

    Part No: 159CV

    Mini-Mini Constant Tension Tube Cutter

    $29.67

    The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin-walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier.

    • 2” length allows tool to work effectively in tight spaces
    • Handles the smallest tubing up to 5/8” tubing
    • Spring-loaded pressure point that keep tension constantly on the tubing allows for a tighten 1 time and cut function
    • Professional grade cutter
    • Replaceable cutting wheel, part #159-1

    UPC: 047084001592
    Shipping Weight: .6lbs

    159 Mini-Mini Constant Tension Tube Cutter Flyer

    Also available:
    157 Constant Pressure Tube Cutter 3/16″ – 7/8″
    158 Constant Pressure Tube Cutter 1/8″ – 1-1/8″

    Quick View
  • Quick Release Ratcheting Tubing/PVC Cutter

    Quick Release Ratcheting Tubing/PVC Cutter

    $29.60

    Part No: 767CV

    Quick Release Ratcheting Tubing/PVC Cutter

    $29.60

     

    This ratcheting tubing & PVC cutter is designed to cut industrial air hose, multi-purpose hose, heater and washer hose, vacuum hose, non-metallic fuel line hose, PVC pipe, battery cables, copper tractor trailer cable and non-metallic air brake hose up to 1-1/2″ in diameter.

    • Cutting range: 1/4″ to 1-1/2″
    • Features a quick- release mechanism to quickly and easily open pliers for use.
    • Ratcheting action makes cutting easy
    • Also features a locking mechanism, in handle, for storage.
    • Replacement blade: Part #767-100

    UPC: 047084007679
    Shipping weight: .95lb

    767CV Quick Release PVC Cutter Flyer

    Quick View
  • 24″ Urethane Cut Out Knife

    24″ Urethane Cut Out Knife

    $29.15

    Part No: 17

    24″ Urethane Cut Out Knife

    $29.15
    • Composed of rigid aluminum that will not flex.
    • Centered blade so tool can be used from either side.
    • Flush securing screws prevent dash and molding damage.

    UPC: 047084000175
    Shipping Weight: .75lbs

    Quick View
  • Scraper Set

    Scraper Set

    $28.95

    Part No: 52600

    Scraper Set

    $28.95
    • Includes our most popular scrapers in one complete set.
    • Set Includes: Two Mini Scrapers (701), One Extended Scrapers (717), and One Folding Scraper (747)

    UPC: 047084526002
    Shipping weight: .8lbs

    Quick View
  • 20 PC Electrical Back Probe Kit

    20 PC Electrical Back Probe Kit

    $28.47

    Part No: 613CV

    20 PC Electrical Back Probe Kit

    $28.47

    • Access electrical circuits from the back side of connectors
    • Extended wires make testing connectors more convenient
    • Access to check for voltage or amperage while connector is plugged in

    UPC: 047084006139
    Shipping weight: .06lbs

    613 20 PC Electrical Backprobe Kit Replacement Parts

    613 20 PC Electrical Backprobe Kit Flyer

    Also available:
    611 – 17 PC Electrical Back Probe Kit
    61500 – 12 PC Master Back Probe Set

    Quick View
  • Heavy-Duty Three Legged Oil Filter Wrench

    Heavy-Duty Three Legged Oil Filter Wrench

    $28.30

    Part No: 987

    Heavy-Duty Three Legged Oil Filter Wrench

    $28.30

    This three legged oil filter wrench design is ideal for removing spin-on filters in tight access areas as there is no handle to interfere with removal.

    • Long serrated legs driven by a 3/8″ extension and ratchet wrap around the filter.
    • Fits filters with diameter of 2-1/2″ to 4-3/4″ (64mm-121mm).

    UPC: 047084009871
    Shipping weight: 1.2lbs

    987 Three Leg OFW Flyer

    Quick View