CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Product Categories

  • Tube Bend Mirror Adapters

    $20.22

    Part No: 75902

    Tube Bend Mirror Adapters

    $20.22

    These adapters allow users to easily create matching bends and angles on two lines at the same time or use an existing tube to guide the creation of a replacement line. Remove the guesswork and do it right the first time.

    • Adapters used to mirror or match the brake line runs for duplication of bends.
    • Allows users to precisely match proper angles and points on run to make bends.
    • For steel, copper, and plastic-coated brake lines with diameters of 3/16” (4.75mm) or ¼” (6.3mm)

    UPC: 047084759028
    Shipping Weight: .09lb

     

    Quick View

  • 3 PC Drive Adapters Set

    $19.54

    Part No: 487

    3 PC Drive Adapters Set

    $19.54
    • Set of drive adapters that step
    • Available in a set or individually
      • Part 487-1: 1/4″F x 3/8”M
      • Part 487-2: 3/8”F x 1/2″M
      • Part 487-3: 1/2″F x 3/4″M

    UPC: 047084004876
    Shipping Weight: .64lbs

    Quick View

  • Heavy Duty Circuit Tester

    $19.31

    Part No: 70

    Heavy Duty Circuit Tester

    $19.31
    • Tests 6-12-24 volt AC or DC systems for open grounded or short circuits.
    • 60in 16 gauge wire with heavy duty ground clip.
    • No. 67-01 Two replacement indicator bulbs.

    UPC: 047084000700
    Shipping Weight: .45lbs

    Quick View

  • Twin Spin Drive Converter 3/8″ – 1/2″

    $19.28

    Part No: 489

    Twin Spin Drive Converter 3/8″ – 1/2″

    $19.28
    • Can be used to use a 3/8″ drive socket on a 1/2″ ratchet or a 1/2″ drive socket on a 3/8″ ratchet.
    • Can withstand higher torque than traditional adapters.
    • Can be used as a small extension or hand drive for tight access.
    • Patented

    UPC: 047084004890
    Shipping Weight: .3lbs

    Quick View

  • Toyota Brake Spring Tool

    $19.00

    Part No: 364

    Toyota Brake Spring Tool

    $19.00

    The user can put the tip of this tool through the access hole and engage the spring cup on a variety of Toyota vehicles.

    • Special tip is designed to engage the shoe hold down spring cup
    • Lower profile brake spring tool with a longer reach.
    • 2000 and current Tacoma, Tundra, FJ Cruiser, 4Runner, Land Cruiser, and Camry

    UPC: 047084003640
    Shipping Weight: .25lbs

    Quick View

  • Euro Stretch Belt Installation Tool

    $18.97

    Part No: 735

    Euro Stretch Belt Installation Tool

    $18.97

    FEATURES

    • Larger with different pin configuration to accommodate larger pulleys with different designs found on many European vehicles.
    • Quickly and easily installs stretch belts.
    • Will not damage stretch belts during installation.
    • Stretch Belts are being used more often in new vehicles and this tool is necessary in most applications.
    • Eliminates the belt tensioner.
    • Installation can be difficult because if the belt is twisted it can be damaged. This tool prevents that potential damage.
    • Patented
    Quick View

  • Drop and Drive Spring Loaded Bit Holder

    $18.86

    Part No: 494

    Drop and Drive Spring Loaded Bit Holder

    $18.86

    Presenting the patented magnetic bit driver with a guide that retracts and extends on its own every time, unlike any driver on the market! For use anywhere, inside and out, from putting up drywall and cement board to hanging sheathing or installing decking. Reloads faster, drop the fastener in and drive it.

    • Spring-loaded bit adapter that guides it drives
    • Guide will not only retract but will also extend back
    • Guide locks to easily interchange bits
    • Internal magnet holds bits in place
    • For use with power tools including impact drivers
    • Accepts existing, common 1/4″ hex bits
    • Limited lifetime warranty

    UPC: 047084004944
    Shipping Weight: .13lbs

    494 Drop and Drive Sales Sheet

     

    Quick View

  • Twin Spin Drive Converter 1/4″ – 3/8″

    $18.45

    Part No: 488

    Twin Spin Drive Converter 1/4″ – 3/8″

    $18.45
    • Can be used to use a 1/4″. drive socket on a 3/8″ ratchet or a 3/8″ drive socket on a 1/4″ ratchet.
    • Can withstand higher torque than traditional adapters.
    • Can be used as a small extension or hand drive for tight access.
    • Patented

    UPC: 047084004883
    Shipping Weight: .45lbs

    Quick View

  • Ford Fuel Filter Wrench

    $18.00

    Part No: 25200

    Ford Fuel Filter Wrench

    $18.00

    FEATURES

    • Low profile that allows mechanics to access those tough fuel filters in tight quarters.
    • Used for the installation and removal on Ford Power Stroke Diesel and International-Navistar Diesel engines.
    • Other wrenches sometimes break off points of the lid due to pressure not being distributed by the wrench but this tool spreads the force over six points preventing damage.
    Quick View

  • Tamper Resistant Square Drive Torx Bit Set

    $17.15

    Part No: 914

    Tamper Resistant Square Drive Torx Bit Set

    $17.15

    FEATURES

    • Designed for installing and removing tamper-proof Torx fasteners.
    • Set includes: T-10, T-15, T-20, T-25, T-27, T-30, and T-40 plus bit holder and 1⁄4in x 1⁄4in stored in vinyl pouch.
    Quick View

  • Fluted Screw Extractor Set

    $17.00

    Part No: 441

    Fluted Screw Extractor Set

    $17.00

    Made from forged alloy steel, this this tapered style extractor can be used to extract broken studs, screws, pipe and pipe fittings.

    • Has gradual taper and long flutes.
    • Available as individuals:
      Part 441-1 – For Removing Screw/Stud/Bolt – 1/4″, 5/16″
      Part 441-2 – For Removing Screw/Stud/Bolt  – 3/8″
      Part 441-3 – For Removing Screw/Stud/Bolt – 7/16″
      Part 441-4 – For Removing Screw/Stud/Bolt – 1/2″, 9/16″
      Part 441-5 – For Removing Screw/Stud/Bolt – 5/8″

    UPC: 047084004418
    Shipping Weight: .3lbs

    Quick View

  • Swivel Truck Oil Filter Wrench

    $16.92

    Part No: 989

    Swivel Truck Oil Filter Wrench

    $16.92

    Fits filters 4-5/16″ to 4-3/4″ (110mm-120mm)

    FEATURES & BENEFITS

    • Features a swivel handle which allows user to get to filters in hard-to-reach areas
    • Wide, dimpled band securely grips filters without crushing
    • Easy-grip vinyl handle

    Quick View