CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Product Categories

  • Pitman Arm Puller

    $35.80

    Part No: 186CV

    Pitman Arm Puller

    $35.80

    Heavy duty tool is designed to remove pitman arms from late model cars and light trucks.

    • Yoke is forged from high grade alloy steel and heat treated.
    • 1-5/16” opening 2-1/2″ pull
    • Replacement yoke: Part #186-100

    UPC: 047084001868
    Shipping Weight: 2lbs

    Quick View

  • Disk Brake Pad Spreader

    $35.72

    Part No: 703

    Disk Brake Pad Spreader

    $35.72

    FEATURES

    • Used for easy efficient brake pad installation
    • Works on all standard and four-piston caliper disc brakes
    • Cuts installation time dramatically
    • Tool fits between the two new pads being installed then expands to retract the piston.
    • Leaves both hands free to slide the caliper over the rotor.
    • After it’s started the spreader is removed and you can slide the caliper over the rotor.
    Quick View

  • Stud Remover

    $35.72

    Part No: 19

    Stud Remover

    $35.72

    This powerful stud removing tool is designed to remove rusted, broken, seized bolts and studs with ease. Ideal use in tight access and hard to reach applications. Has a capacity range of 1/4″ up to 3/4″ (6MM to 19MM) diameter or bolt. Roller assembly grips like a pipe wrench and uses a cam action to grasp material firmly for removal. Use with a 1/2″ Dr. ratchet or breaker bar.

    FEATURES

    • This powerful tool is designed to fit into hard-to-reach spots and to remove hard-to-turn studs.
    • Will remove broken studs with threads with material above the surface.
    • Capacity from 1/4″ – 3/4″ (6-19mm) diameter.
    • Zinc plated.
    • Roller assembly grips like a pipe wrench.
    • Works with a 1/2″ drive

    UPC: 047084000199
    Shipping Weight: 1.25lbs.

    Quick View

  • Ford® Harmonic Balancer Holder

    $35.00

    Part No: 38110CV

    Ford® Harmonic Balancer Holder

    $35.00

    A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt-on popular Ford® engines, or it can be used to turn the engine when doing timing work. The studs of the tool go into the open spans of the harmonic balancer to apply force against them, while a 1/2″ drive ratchet or breaker bar is inserted into the knockout hole of the face plate for leverage. The open faceplate allows a socket to be applied to the retaining bolt of the balancer. While holding the balancer in place, the bolt can be loosened or tightened without the crankshaft turning with it. This tool can also be utilized to turn the engine when a procedure requires alignment of timing marks.

    • Designed to fit multiple Ford® vehicles ranging from 1992 – 2016
    • The adapter securely fits the crankshaft to keep it from rotating when loosening the pulley bolt
    • The ½” drive knockout allows for the use of a ratchet or breaker bar
    • Ideal for rotating the engine for timing-related jobs
    • Will not warp balancer
    • Heavy-duty construction

    UPC: 047084381106
    Shipping weight: 1.19lbs

    38110 For Harmonic Balancer Holder Flyer

    Quick View

  • 4 PC Oil Pan Plug Remover

    $35.00

    Part No: 38200CV

    4 PC Oil Pan Plug Remover

    $35.00

    Many Late model Ford®, Volkswagen®, Audi® and BMW® have a plastic oil pan and plastic drain plug. This tool set is specially designed to slot in and release these plugs found on many late model Ford®, Volkswagen®, Audi® and BMW® vehicles.

    • Revised to include Ford®/Lincoln® plastic oil pan drain plugs of engines: 2.7L / 2.7L (2018) / 3.0L / 3.3L / 3.5L Turbo from 9-12-2018 / 5.0L (2018)
    • Adapters will not damage drain plugs
    • Designed to slot in and easily release these plugs
    • Set comes in a hard case for easy storage

    UPC: 047084000250
    Shipping weight: .69lbs

    Quick View

  • Combination 6-Pt. and 12-Pt. Oxygen Sensor Wrench

    $35.00

    Part No: 844

    Combination 6-Pt. and 12-Pt. Oxygen Sensor Wrench

    $35.00

    FEATURES

    • The 12 & 6 Point Flexible Oxygen Sensor Wrench Model: 844 from Cal-Van Tools is designed for use with most oxygen sensors.
    • Double sided design allows the technician easier access with the 12 point socket and more torque with 6 point for rusted or stubborn sensors.
    • Gives technicians access to remove sensors in difficult areas.
    • Offset design allows more room and leverage in confined areas.
    Quick View

  • 7 oz Multi-Purpose Fluid Extractor Kit

    $34.50

    Part No: 85610CV

    7 oz Multi-Purpose Fluid Extractor Kit

    $34.50

    The 7 oz Multi-purpose fluid extractor is made from heavy-duty, chemical resistant, polypropylene plastic. Ideal to extract oil, brake, steering fluids and anti-freeze. Includes two quick connect extension tubes for hard to reach areas and deep fluid reservoir found on all vehicles types.

    • Will hold 7 oz.
    • Dual measurement scale on tube determines fluid levels easily
    • Safe for brake, steering, and other fluids, including anti-freeze
    • Includes two quick connect extension tubes for hard to reach areas and deep fluid reservoirs
    • Syringes are washable

    UPC: 047084856109
    Shipping Weight: .65lbs

    85610CV Breakdown

    85610 7 oz Multi-Purpose Fluid Extractor Flyer

     

    Quick View

  • 5 PC Mortorq Bit Set

    $34.00

    Part No: 935

    5 PC Mortorq Bit Set

    $34.00
    • Fits commonly used GM®, Nissan® and Mazda® seat track and transmission bell housing bolts.
    • Used for differentials, door panels, suspension components and restraint systems
    • Set includes: #0, #1, #2, #3, #4

    UPC: 047084009352
    Shipping weight: .6lbs

    Quick View

  • Adjustable Cylinder Hone Deglazer, 2″- 5″

    $34.00

    Part No: 32300

    Adjustable Cylinder Hone Deglazer, 2″- 5″

    $34.00

    An extremely versatile hone for 2″ – 5″ (56mm – 127mm) diameter cylinders for many applications.

    • For use with a high or low speed drill
    • Adjustable, knurled tension knob controls pressure for varying diameter cylinders
    • Fast cutting action
    • 3″ medium grit, 220 – 240 stones
    • Replacement Stones:
      • Part #324: Medium Grit Stone, 220-240, set of 3

    UPC: 047084323007
    Shipping weight: .6lbs

    Quick View

  • Oxygen Sensor Wrench

    $34.00

    Part No: 843

    Oxygen Sensor Wrench

    $34.00

    FEATURES

    • Flex head offers essential clearance for removal or installation of oxygen sensors when it is positioned upward and inward to the floorboard or when leverage is needed around an exhaust pipe.
    • Designed for all oxygen sensors with 7⁄8 hex.
    • Works on: Ford Contours 4.6L and 5.4L Ford Modular engines
    • 7⁄8 and 22mm knock sensors used on mid-sized trucks SUVs and vans.
    Quick View

  • Ball Joint Separator

    $33.09

    Part No: 184

    Ball Joint Separator

    $33.09

    This ball joint separator is used to separate ball joints from spindle support arms on almost all domestic and import, front wheel drive vehicles. This tool has two different joint positions that is adjustable up to 2″ for different sized ball joint applications.

    • Use to separate ball joints from spindle
    • Threaded forcing screw allow the tool to be used on different size ball joints
    • Fits on virtually all domestic and import vehicles
    • 13/16″ opening
    • Replacement pin assembly: 184-1
    • Replacement screw: 184-2

    UPC: 047084001844
    Shipping Weight: 2.75lbs

    Quick View

  • Heavy Duty Filter Strap Wrench

    $33.00

    Part No: 803

    Heavy Duty Filter Strap Wrench

    $33.00

    FEATURES

    • This deluxe wrench adjusts quickly to any spin-on filter.
    • Features 3⁄8in and 1⁄2in forged driver and heavy duty strap for high torque requirements.
    • Fits filters up to 9in (228mm)
    Quick View