Product Categories
Showing 205–216 of 316 resultsSorted by price: high to low
-
6.25″ Electrician Scissors
$32.96Part No: 55200CV
6.25″ Electrician Scissors
$32.96The 55200 6.25″ Electrician Scissors are a professional-grade electrician’s scissors. They provide fit, form and function for any automotive electrical job. Allows user to easily cut through wire, cables, ties, tape and loom.
- High Hardness, precision blades
- Cuts up to 12AWG aluminum/copper wire
- Also cuts cable ties, tape and wire looms
- Integrated cable cutter, cuts soft cable up to 0 (1/0) AWG
- Stainless steel frame designed with anti-slip handles
- Built-in stripper and crimper
- Plastic Sheath with belt clip for safe storage
UPC: 047084552001
Shipped weight: .8lbs55200-55203-55206 Electricians Scissors Combined Flyer
Also available:
55203 – 6.75″ Multi-Grip Electrical Scissors
55206 – 8″ Angled Electrician ScissorsQuick View -
5 PC Alternator Coupler Pulley (ADP) Kit
$32.88Part No: 756
5 PC Alternator Coupler Pulley (ADP) Kit
$32.88The 13 PC Alternator Coupler Pulley (ADP) Kit can be used to service both OWC (One-Way Clutch) and OAD (Overrunning Alternator Decoupler) style pulleys. OWC’s were first used in 1997 followed by the OAD in 1999. Today, more and more vehicle manufacturers are recognizing the performance gains achieved with these pulleys and have designed them into their belt drive systems.
- To remove these pulleys, the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counterclockwise, depending on the manufacturer. The opposite would be used in the installation
- Covers most US Euro makes and models with both on and off vehicle applications included, but not limited to: Audi®, BMW®, Buick®, Cadillac®, Chevrolet®, Chrysler® Citroen®, Dodge®, Fiat®, Ford®, Honda®, Lexus®, Mercury®, Mercedes-Benz®, Pontiac®, Porsche®, Saturn®, Scion®, Toyota®, VW®.
- Eliminates the need to shop around for hard-to-find OWC and OAD
- Set Includes: H22 x 33T, H17 x H19, H10 x 70mm L, 12mm x 75mm L x T50, Spline M10
UPC: 047084007563
Shipping weight: .6lbsQuick View -
Tamper Resistant Square Drive Torx Bit Set
$32.63Part No: 913
Tamper Resistant Square Drive Torx Bit Set
$32.63- Contains nine of the most popular tamper resistant square drive bits.
- 1/4″ drive
- Sizes included: T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, and T-50
Quick View -
3 Pin Adjustable Brake Caliper Turn Back Tool
$31.87Part No: 726
3 Pin Adjustable Brake Caliper Turn Back Tool
$31.87This adapter allows you to rewind the pistons in brake calipers, and works by allowing the rotation of the piston at the same time as pushing the piston back into the caliper.
- Replaces larger kits containing up to 20 parts
- Rotates brake pistons back into the caliper on vehicles with self-adjusting parking breaks
- Use with a 3/8″ drive ratchet or breaker bar
- Fits most domestic and import vehicles
- Applications include: Alfa Romeo®, Audi®, Citroen®, Ford®, Honda®, Jaguar®, Land Rover®, Mazda®, Mercedes®, Mini®, Mitsubishi®, Nissan®, Lancer®, Toyota®, VW®, Volvo®
- 726 – 3 Pin Brake Rewind Tool
- Min: .75”
- Max: 1.6”
UPC: 047084007266
Shipping weight: .15lb726 Three Pin Brake Caliper Turn Back Tool Flyer
Also available:
723 – 2 and 3 Pin Adjustable Brake Caliper Turn Back Tool
724 – 2 and 3 Pin Adjustable Brake Caliper Turn Back Tool Set
725 – 2 Pin Adjustable Brake Caliper Turn Back ToolQuick View -
Stripped Hex Screw Removers, SAE
$31.87Part No: 342CV
Stripped Hex Screw Removers, SAE
$31.87The SAE Stripped hex key set is designed to remove rounded/stripped allen head bolts. Nine of the most common sized hex keys ranging from 1/16″ – 3/8” and a handy plastic holder to hang or clip to a tool belt.
- Perfect for removing stripped out hex screws.
- Reverse twist of the hex key allows for easy removal of stripped hex screws.
- Full range to remove most common sizes
- Plastic holder for storage
- Made from chrome vanadium steel
UPC: 047084003428
Shipping Weight: 1.29lbsQuick View -
The Grabber Serpentine Belt Tool
$31.87Part No: 734
The Grabber Serpentine Belt Tool
$31.87- Clamping jaw allows user to position serpentine belt without the belt slipping out of the tool.
- Tru-grip and long reach allows belt routing in tight access areas that would normally be difficult if not impossible.
- Body made of light-weight alloy steel for durability and strength.
- Ergonomic handle provides comfort and ease in use acting as an extension of the users hand.
- Patent Pending
UPC: 047084007341
Shipping weight: .95lbQuick View -
Snap Ring Pliers- Straight
$31.84Part No: 49CV
Snap Ring Pliers- Straight
$31.84The U-joint snap ring pliers are designed to remove and replaced U-Joint snap rings, upholstery clips and a multitude of other removal tasks. The unique jaw allows you to grab snap rings on a flat surface and trim clips of all types without damaging them.
- Designed to remove and replace snap rings on universal joints on Hotchkiss drive shafts
- Can be used to remove plastic push pin retainers on several makes and models
- Designed to remove trim pads & insulation
- Unique jaw design allows the user to easily grab snap rings from a flat surface
- Great for removing interior clips and body panel fasteners
- Straight design
UPC: 047084000496
Shipping Weight: .75lbs49 Snap Ring Plier Straight Flyer
Also available:
48 Snap Ring Pliers – 75˚ OffsetQuick View -
Oil Filter Pliers
$31.63Part No: 298
Oil Filter Pliers
$31.63- Oil Filter Pliers fits filters with diameter of 3-1/8″ – 3-5/8″ (79mm-92mm)
- Pliers design features no-slip jaws with gripping teeth to easily remove stubborn spin-on oil filters.
UPC: 047084002988
Shipping Weight: 1.2lbsQuick View -
Oil Filter Pliers
$31.31Part No: 297
Oil Filter Pliers
$31.31- Oil Filter Pliers fits filters with diameter of 2-3/4″ – 3-1/4″ (70mm-83mm)
- Pliers design features no-slip jaws with gripping teeth to easily remove stubborn spin-on oil filters.
UPC: 047084002971
Shipping Weight: 1.05lbsQuick View -
Double Deburr Tool
$31.29Part No: 169
Double Deburr Tool
$31.29The success of creating a flare with a good seal depends on more than the flaring tool you use. It often comes down to preparation and finish. This tool can clean the inner and outer edges before you begin and clear up and remaining debris after. It is the perfect companion to any of our flaring tools and an upgrade to the one supplied in certain kits.
- For removing burrs of inner and outer tube diameters when performing secondary operations to tubing, steel or copper
- Aluminum, lightweight, body and a sharp, high-speed, steel cutting edges to hold up in any environment
- Inner reamer is a retractable for safety
- Works with tubing range of 1/8″ – 1/2″ (3mm – 12mm)
UPC: 047084001691
Shipping Weight: .44lbsQuick View -
Battery Terminal Clamp Spreader
$30.89Part No: 549CV
Battery Terminal Clamp Spreader
$30.89The Battery Terminal Clamp Spreader is designed to both spread battery cable clamp and clean terminal in one swift operation.
- Forged and heat-treated jaws
- 7-1/2″ overall length
UPC: 047084005491
Shipping Weight: .65lbQuick View -
Harmonic Balancer Puller
$30.80Part No: 189
Harmonic Balancer Puller
$30.80The Harmonic Balancer Puller is designed to pull balancers, vibration dampers, pulleys, and gears with tapped holes. The four slots in the yoke allows the tool to be used in both two- and three-hole applications.
- Fits most domestic and import vehicles
- Center screw designed with removable, floating swivel prevents damage to shaft ends
- Yoke is forged from high-grade, heat-treated alloy steel and zinc plated for long life
- Metric and SAE bolts included
UPC: 047084001899
Shipping Weight: 2.3lbsQuick View
