CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Product Categories

Showing 145–156 of 310 results

  • New!

    4PC OIL FILTER WRENCH SET WITH HOLDER

    $45.00

    Part No: 99000CV

    4PC OIL FILTER WRENCH SET WITH HOLDER

    $45.00
    • Features a swivel handle that allows user to get to filters in hard to reach areas
    • Wide dimpled band securely grips filters without crushing
    • Ergonomic cushioned rubber grip
    • Heavy duty magnetic base holder for secure metal surface placement
    • Locknut allows user to tighten or loosen swivel handle feature
    • Sizes included:
      • Part #99001: 2-1/4″-2-7/8″ (57-73MM)
      • Part #99002: 2-9/16″-3-1/4″ (65-83MM)
      • Part #99003: 2-61/64″-3-3/4″ (75-95MM)
      • Part #99004: 3-5/8″-4-3/8″ (92-111MM)

    Available on backorder

    Quick View

  • Long Torx Screwdriver Set, Tamper-Proof

    $45.00

    Part No: 917

    Long Torx Screwdriver Set, Tamper-Proof

    $45.00

    FEATURES

    • Long shaft for hard to reach areas.
    • Made of S-2 steel for strength.
    • 153⁄4in length.
    • Set Includes: T-10, T-15, T-20, T-25, T-27, and T-30.
    Quick View

  • Extra-Long Torx Screwdriver Set

    $45.00

    Part No: 912

    Extra-Long Torx Screwdriver Set

    $45.00

    FEATURES

    • Long shaft for hard to reach areas.
    • Made of S-2 steel for strength.
    • 153⁄4in length.
    • Set Includes: T-10, T-15, T-20, T-25, T-27, and T-30.
    Quick View

  • Ratcheting Chain Wrench

    $45.00

    Part No: 878

    Ratcheting Chain Wrench

    $45.00

    FEATURES

    • Chain wrench can be used on any object with a diameter from 5⁄8” up to 5″ in diameter.
    Quick View

  • Constant Pressure Tube Cutter 1/8″ – 1 1/8″

    $45.00

    Part No: 158

    Constant Pressure Tube Cutter 1/8″ – 1 1/8″

    $45.00

    FEATURES

    • The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter to until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
    • The 158 can cut a range of tubing sizes from 1/8 to 1 1/8.
    • Features a replaceable blade.
    Quick View

  • 8″ ANGLED ELECTRICIAN SCISSORS

    $44.50

    Part No: 55206CV

    8″ ANGLED ELECTRICIAN SCISSORS

    $44.50

    The 55206 8″ Angled Electrician Scissors, are professional-grade electrician’s scissors that provide fit, form and function for any automotive electrical job. Allows user to easily cut through wire, cables, ties, tape and loom.

    • High Hardness, precision blades
    • Cuts up to 10AWG aluminum/copper wire
    • Also cuts cable ties, tape and wire looms
    • Integrated cable cutter, cuts soft cable up to 000 (3/0) AWG
    • Full Tang, stainless steel frame with anti-slip handles
    • Built in stripper and crimper
    • Angled handle design provides long reach and superior leverage
    • Built in spring and safety lock feature
    • Plastic Sheath with belt clip for safe storage

    Quick View

  • Flange Type Axle & Front Wheel Hub Puller

    $44.26

    Part No: 526

    Flange Type Axle & Front Wheel Hub Puller

    $44.26

    FEATURES

    • For use on domestic and import cars and light trucks.
    • Range is 33⁄4” to 41⁄2“.
    • For use on 4, 5, or 6 bolt stud design and all non-C Lock GM axles.
    • May be used with Cal-Van No.498 Flange Type Puller
    Quick View

  • Fuel Tank Locking Ring Tool

    $43.95

    Part No: 253

    Fuel Tank Locking Ring Tool

    $43.95

    • Unique design fits on multiple makes and models of fuel tank lock rings
    • Easily removes and installs fuel tank lock rings when servicing fuel pump or fuel sending unit
    • Allow for greater clearance on the top of fuel sending units than other versions

    Applications: (not limited)
    2004 and newer Ford® F-150® trucks, 2004 and newer Chevrolet® 1/2-ton and 3/4-ton trucks, FCA® mini vans, PT Cruisers®, Dakotas®, and Durangos®

    Quick View

  • Seal Puller

    $42.69

    Part No: 49600

    Seal Puller

    $42.69

    This heavy duty seal puller removes metal or rubber, full lip seals.
    Cone adapter is recessed to hold screw and locks screw into place enabling shaft to turn by handle to force screw through seal.
    A 17-in. long shaft enables high pulling force.

    Quick View

  • Stud Removal and Installation Kit- SAE

    $42.00

    Part No: 95600

    Stud Removal and Installation Kit- SAE

    $42.00

    Using make-shift methods to remove and install studs is often ineffective and has a higher possibility to causing damage to the studs, meaning more work. This set is specifically designed to make it easier to do it the right way every time.

    SAE version includes five installers and five removers in multiple sizes.

    FEATURES

    • Specifically designed to make stud removal and installation easier
    • Eliminates the potential for damage to studs other methods often cause
    • Contains common thread sizes

    SAE thread sizes:5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14

    Quick View

  • In-Line Flaring Tool SAE

    $42.00

    Part No: 164

    In-Line Flaring Tool SAE

    $42.00

    FEATURES

    • Make Perfect Flares Every Time!
    • Use to make single and double flares
    • The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping, keeps flares centered, and makes the job of flaring easier. Superior to bar type flaring tools.
    • Will do 3/16″, 1/4″ and 5/16″ flares.
    • Low profile design allows for use on or off the vehicle
    • Designed to be used with a ratchet to make flares easier
    • In line design makes a more accurate flare
    • Double clamp and hex screw design keeps tubing locked tightly in position
    • For use on thin walled steel and copper tubing
    • Available in SAE (164), Metric (154) and Auto-Specific Set (161)
    • Patent Pending
    Quick View

  • Hose Clamp Pliers

    $41.87

    Part No: 59

    Hose Clamp Pliers

    $41.87

    FEATURES

    Special tip designed to grip almost any hose clamp from any direction
    Locking ratcheted jaws enable user to keep pliers locked onto clamps
    Extra-long reach, 11″ overall length

    Out of stock

    Quick View