CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Product Categories

  • SAE In-Line Flaring Tool

    $42.00

    Part No: 164

    SAE In-Line Flaring Tool

    $42.00

    The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping, keeps flares centered, and makes the job of flaring easier. Superior to bar type flaring tools.

    • Make Perfect Flares Every Time!
    • Use to make single and double flares
    • Will do 3/16″, 1/4″ and 5/16″ flares
    • Low profile design allows for use on or off the vehicle
    • Designed to be used with a ratchet to make flares easier
    • In line design makes a more accurate flare
    • Double clamp and hex screw design keeps tubing locked tightly in position
    • For use on thin walled steel and copper tubing
    • Available in SAE (164), Metric (154) and Auto-Specific Set (161)
    • Patent Pending

    UPC: 047084001646
    Shipping Weight: 1.5lbs

    164 – In Line Flaring Instructions

    Quick View

  • Hose Clamp Pliers

    $41.87

    Part No: 59CV

    Hose Clamp Pliers

    $41.87
    • Special tip designed to grip almost any hose clamp from any direction
    • Locking ratcheted jaws enable user to keep pliers locked onto clamps
    • Extra-long reach, 11″ overall length
    • Repair Kit: Part #58-2 includes thumb screw, spring, and lever.

    UPC: 047084000595
    Shipping Weight: 1.02lbs

    Quick View

  • 12 PC MASTER BACK PROBE SET

    $41.62

    Part No: 61500CV

    12 PC MASTER BACK PROBE SET

    $41.62

    The 12PC Electrical back probe set allows easy access to electrical circuits from the back side of connectors. Designed for repair diagnostic troubleshooting, automotive testing, voltage and amperage testing while connector is plugged in. Includes two new flexible back probes that can be bent or angled in all positions without damaging the soft pvc sleeve and a 30 volt testing capacity. Set also includes two curved back probes with a 25 volt or 10 AMP test rating. All back probes are compatible with a standard 4MM plug and come with a 1 year warranty.

    • Allows easy access to electrical circuts from the back side of connectors
    • Compatible with standard 4MM plugs
    • Easy access to check voltage or amperage while connector is plugged in
    • New and improved flexible backprobes for testing up to 30 volts
    • 2 curved back probes with 25 volt or 10 AMP rating
    • 4MM standard banana male plugs

    Quick View

  • MAGNETIC GLOVE BOX HOLDER

    $41.10

    Part No: 90945CV

    MAGNETIC GLOVE BOX HOLDER

    $41.10

    The magnetic glovebox holding tray helps you to keep glove boxes neat and where you need them the most. Comes with heavy duty non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds 3 spray cans and 7 various sized screwdrivers and a holding weight capacity of 9.47LBS. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

    • Heavy Duty non-marring rubber coated magnets
    • Industrial Grade powder coating finish resist rust and corrosion
    • Adjustable side springs to hold glove boxes in place
    • 9.47LBS Weight Capacity

    Quick View

  • MAGNETIC PAPER TOWEL HOLDER

    $41.10

    Part No: 90944CV

    MAGNETIC PAPER TOWEL HOLDER

    $41.10

    This Pair of magnetic paper towel holders is perfect for mechanics and comes with heavy duty non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds a common sized roll of paper towel, roll of shop towels by any work area, with a 9.47lbs holding weight capacity. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

    • Heavy Duty non-marring rubber coated magnets
    • Industrial Grade powder coating finish resist rust and corrosion
    • Paper Towel holder will adjust any any length roll
    • 9.47LBS Weight Capacity

    Quick View

  • MAGNETIC SPRAY CAN HOLDER

    $41.10

    Part No: 90943CV

    MAGNETIC SPRAY CAN HOLDER

    $41.10

    The magnetic spray can and screwdriver toolbox shelf tray, comes with heavy duty non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds 3 spray cans and 7 various sized screwdrivers and a holding weight capacity of 20.7LBS. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

    • Heavy Duty non-marring rubber coated magnets
    • Industrial Grade powder coating finish resist rust and corrosion
    • 3 spray can holder tray with 7 various sized screwdriver holes ranging from 0.28″-0.46″
    • 20.7LBS Weight Capacity
    • Spray Can diameter is 2.97″

    Quick View

  • Body Dent & Seal Puller

    $40.78

    Part No: 49500

    Body Dent & Seal Puller

    $40.78

    FEATURES

    • Tool used to pull dented sheet metal back into position.
    • Equipped with a 2- 1/2 lb. slide hammer.
    • A 13in long shaft enables high pulling force.
    Quick View

  • Adjustable Oil Filter Pliers

    $40.25

    Part No: 302

    Adjustable Oil Filter Pliers

    $40.25
    • Self-adjusting, spring action (NOT a slip joint) oil filter pliers allow for a full range of filter applications.
    • Heavy-duty forged construction with textured grip add both strengthened leverage to the tool.
    • Fits filters from 2-1/4″ – 6″ (60mm-152mm)
    • 283-REPAIR kit available

    UPC: 047084003022
    Shipping Weight: 1.15lbs

    Quick View

  • Ford & Mazda Crankshaft Holder

    $40.00

    Part No: 38100

    Ford & Mazda Crankshaft Holder

    $40.00

    A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt on many popular Ford and Mazda vehicles, or it can be used to turn the engine when doing timing work.

    • Adapter securely fits the crankshaft tokeep it from rotating when loosening the pulley bolt
    • The ½” drive tab allows for the use of a ratchet or breaker bar
    • Ideal for timing-related jobs
    • Heavy-duty construction and a rust resistant finish

    Applications: Ford/Mazda 2005 2011 2.0L/2.3L/2.5L (including some Mercury and Volvo applications) (Hybrid models also)

    Models: (Ford) Focus, Fusion, Escape, Ranger, Transit; (Mazda) MX 2,MX 3, MX 5, MX 6; CX 5, CX 9; (Mercury) Milan, MKZ, Mariner

    Warranty: Lifetime Against Defects

    Quick View

  • Clutch Alignment Tool

    $40.00

    Part No: 20CV

    Clutch Alignment Tool

    $40.00

    Used to align single disc clutches on most domestic and imported vehicles. Set contains 4 two-step SAE pilot bushings, 2 metric two-step pilot bushings, 1 center shaft, and a tapered alignment cone with a 1-1/8″ maximum diameter taper.

    • Designed to align clutch plates and pilot bearings accurately
    • Used to align single disc clutches on most domestic and imported vehicles
    • Contains 4 SAE two-step pilot bushings, 4 metric two-step pilot bushings, a center shaft with knurled handle, and a tapered alignment cone for up to 1-1/8” diameters.

    UPC: 047084000205
    Shipping Weight: 2.10lbs.

    20 Clutch Alignment Tool Flyer NP

     

    Quick View

  • BMW Oil Cooler Line Pliers

    $40.00

    Part No: 685

    BMW Oil Cooler Line Pliers

    $40.00

    FEATURES

    Releases the hydraulic cooling lines that connect to the transmission

    BMW Applications: E46, E53, E65, E66, E85, R50, R53

    Quick View

  • Metric In-Line Flaring Tool

    $40.00

    Part No: 154

    Metric In-Line Flaring Tool

    $40.00

    The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping keeps flares centered and makes the job of flaring easier. Superior to bar type flaring tools.

    • Make Perfect Flares Every Time!
    • Use to make single and double flares
    • Low profile design allows for use on or off the vehicle
    • Designed to be used with a ratchet to make flares easier
    • In line design makes a more accurate flare
    • Double clamp and hex screw design keeps tubing locked tightly in position
    • For use on thin walled steel and copper tubing
    • Available in SAE 164 Metric 154 and Auto-Specific Set 161
    • Patent Pending

    UPC: 047084001547
    Shipping Weight: 1.45lbs

    154 – In Line Flaring Instructions

    Quick View