Projects
Showing 253–264 of 316 resultsSorted by latest
-
5-Ton Bar Type Puller Bearing Separator Set
$148.22Part No: 502CV
5-Ton Bar Type Puller Bearing Separator Set
$148.22This set includes two of our most popular bearing splitters (2″ and 3″), four sets of hex push-puller legs, and a bar-type puller head with a 9/16″ forcing screw. Separator tools can be used with bar puller and legs for a wide variety of pulling jobs. The 5″ puller cross-bar with a 6-1/4″ forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools.
- Includes a 2″ and 3″ puller
- Includes 4 sets of hex push-puller legs
- Separator tools can be used with bar pullers and legs or by themselves
- 5″ puller cross-bar can be used separately or in combination with pullers
UPC: 047084005026
Shipping Weight: 10.3lbsQuick View -
7-Ton Bar Type Puller Bearing Separator Set
$192.22Part No: 501CV
7-Ton Bar Type Puller Bearing Separator Set
$192.22This Puller/bearing separator set was created for difficult jobs. With the capacity for larger applications up to 7-tons, it also has a greater reach of 8 to 16 inches.
- Includes a Bearing Splitter with 4″ capacity, two sets of hex push puller legs, and an 8″ bar-type puller head mated with a custom thread forcing screw
- Professionals have a Puller-Bearing set for hard jobs up to 7-tons
- Larger applications and a greater reach 8″ to 16″
UPC: 047084005019
Shipping Weight: 17.05lbsQuick View -
Twin Spin Drive Converter 3/8″ – 1/2″
$21.19Part No: 489
Twin Spin Drive Converter 3/8″ – 1/2″
$21.19- Can be used to use a 3/8″ drive socket on a 1/2″ ratchet or a 1/2″ drive socket on a 3/8″ ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
UPC: 047084004890
Shipping Weight: .3lbs489 Twin Spin Drive Converter Flyer
Also available:
488 – Twin Spin Drive Converter 1/4″ – 3/8″Quick View -
Twin Spin Drive Converter 1/4″ – 3/8″
$20.27Part No: 488
Twin Spin Drive Converter 1/4″ – 3/8″
$20.27- Can be used to use a 1/4″ drive socket on a 3/8″ ratchet or a 3/8″ drive socket on a 1/4″ ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
UPC: 047084004883
Shipping Weight: .45lbsAlso available:
489 – Twin Spin Drive Converter 3/8″ – 1/2″Quick View -
90 Degree Gearless Angle Drive 3/8″
$17.58Part No: 483
90 Degree Gearless Angle Drive 3/8″
$17.58- Allows access to hard to reach areas.
- Replaces hard to use universal adapters.
- Exceeds ANSI specs torque max for universal socket adapters.
- Patented
UPC: 047084004838
Shipping Weight: .45lbsAlso available:
482 – 90 Degree Gearless Angle Drive 1/4″
485 – 45 Degree Gearless Angle Drive 1/4″Quick View -
90 Degree Gearless Angle Drive 1/4″
$17.58Part No: 482
90 Degree Gearless Angle Drive 1/4″
$17.58- Allows access to hard to reach areas.
- Replaces hard to use universal adapters.
- Exceeds ANSI specs torque max for universal socket adapters.
- Patented
UPC: 047084004821
Shipping Weight: .3lbsAlso available:
483 – 90 Degree Gearless Angle Drive 3/8″
485 – 45 Degree Gearless Angle Drive 1/4″Quick View -
Tight Access Drive Wrench
$35.16Part No: 450
Tight Access Drive Wrench
$35.16A gear-driven metric wrench set solution to gain easy access to tight areas where a box type wrench would not be practical.
- Dramatically reduce time needed to remove fasteners in awkward areas.
- Comes in a set of five 10mm, 12mm, 13mm, 14mm, 15mm
- Comes in a blow molded case.
- Includes adapter for use with 3/8″ sockets.
- Patented
UPC: 047084004500
Shipping Weight: 3.35lbs.Quick View -
Fluted Screw Extractor Set
$18.68Part No: 441
Fluted Screw Extractor Set
$18.68Made from forged alloy steel, this this tapered style extractor can be used to extract broken studs, screws, pipe and pipe fittings.
- Has gradual taper and long flutes.
- Available as individuals:
Part 441-1 – For Removing Screw/Stud/Bolt – 1/4″, 5/16″
Part 441-2 – For Removing Screw/Stud/Bolt – 3/8″
Part 441-3 – For Removing Screw/Stud/Bolt – 7/16″
Part 441-4 – For Removing Screw/Stud/Bolt – 1/2″, 9/16″
Part 441-5 – For Removing Screw/Stud/Bolt – 5/8″
UPC: 047084004418
Shipping Weight: .3lbsQuick View -
4 PC Spiral Screw Extractor Set
$16.79Part No: 438
4 PC Spiral Screw Extractor Set
$16.79Made from forged alloy steel, this spiral style extractor can be used to extract broken studs or screws.
- Correct drill size for hole in part to be extracted is indicated on the tool.
- Available as individuals:
Part 431 – For Removing Screws Shank – 3/16″
Part 432 – For Removing Screws Shank – 1/4″
Part 433 – For Removing Screws Shank – 5/16″
Part 434 – For Removing Screws Shank – 7/16″
UPC: 047084004388
Shipping Weight: .2lbsQuick View -
Harmonic Balancer Puller
$95.54Part No: 386
Harmonic Balancer Puller
$95.54Designed for removing damper pulleys in tight engine compartments, without removing the radiator. The kit contains the 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8″ square drive for ratchet use, and a 3/4″ hex for wrench or socket use.
- Applications:
- GM 2000 Generation III 4.8L, 5.3L, 5.7L, 6.0L and 8.1L V8s
- Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988
- Chevrolet trucks 2003 – later 4.2L, I6, 2004 – current 3.5L, I5 and 2005 – current 2.8L I4
- Chrysler engines 1990 – later, including 2.0L, 2.4L – 4s; plus 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s
- Ford 1995 – later V8 engines with 3 spoke pressed on damper
- Mitsubishi Eclipse 1995 – 1999 2.0L DOHC non-turbo
UPC: 047084003862
Shipping Weight: 2.9lbsQuick View - Applications:
-
Toyota® Brake Spring Tool
$20.88Part No: 364
Toyota® Brake Spring Tool
$20.88The low-profile design of this tool, allows the user to put the tip of this tool through the access hole and engage the parking brake spring cup, turn and release the pin on a variety of Toyota® vehicles.
- Special tip is designed to engage the shoe hold down spring cup
- Lower profile brake spring tool with a longer reach
- 2000 and current Tacoma, Tundra, FJ Cruiser, 4Runner, Land Cruiser, and Camry
UPC: 047084003640
Shipping Weight: .25lbsAvailable on backorder
Quick View -
Adjustable Brake Cylinder Hone
$17.30Part No: 362
Adjustable Brake Cylinder Hone
$17.30Finest “full range” hone on the market covering sizes from 3/4″ to 2-1/2″ (19mm-64mm).
- Knurled nut controls tension for honing, deglazing throughout full range.
- Hones clear to end in step-cut and blind end cylinders.
- Flexible shaft for easy use right on car.
- Includes set of three 1-1/8″ (29mm) Medium Grit Stones, 220-240, Grit. Replacement part: 363.
- Can also use replacement stones, 363-01 (fine grit) or 363-02 (coarse grit).
UPC: 047084003626
Shipping Weight: .2lbsQuick View