CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Projects

  • 22 PC Alternator Coupler Pulley (ADP) Kit

    22 PC Alternator Coupler Pulley (ADP) Kit

    $142.86

    Part No: 750

    22 PC Alternator Coupler Pulley (ADP) Kit

    $142.86

    The 22 PC Alternator Coupler Pulley (ADP) Kit can be used to service both OWC (One-Way Clutch) and OAD (Overrunning Alternator Decoupler) style pulleys. OWC’s were first used in 1997 followed by the OAD in 1999. Today, more and more vehicle manufacturers are recognizing the performance gains achieved with these pulleys and have designed them into their belt drive systems.

    • To remove these pulleys, the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counterclockwise, depending on the manufacturer. The opposite would be used in the installation
    • Will service vehicles included, but are not limited to: Audi®, BMW®, Buick®, Cadillac®, Chevrolet®, Chrysler®, Citroen®, Dodge®, Fiat®, Ford®, Honda®, Lexus®, Mercury®, Mercedes-Benz® Opel®, Pontiac®, Peugeot®, Porsche®, Renault®, Saturn®, Seat®, Scion®, Toyota®, and VW®
    • Eliminates the need to shop around for hard-to-find OWC and OAD tools

    UPC: 047084007501
    Shipping weight: 4.7lbs

    750 Instructions

     

    Quick View
  • Scraper Mate Sticker Remover

    Scraper Mate Sticker Remover

    $8.85

    Part No: 747

    Scraper Mate Sticker Remover

    $8.85
    • Economical compact scraper is perfect for removing old stickers and paint blotches off windows.
    • Extends to 7-7/8″ when fully opened and locked into position.
    • Holder tilts blade to give a better angle for getting into corners.
    • Blade folds into handle for safe storage.

    UPC: 047084007471
    Shipping weight: .3lbs

    Quick View
  • Serpentine Belt Tool Set

    Serpentine Belt Tool Set

    $87.91

    Part No: 738

    Serpentine Belt Tool Set

    $87.91
    • Designed to remove and install serpentine belts on vehicles with spring-loaded belt tensioners
    • Eases removal and installation of serpentine belt
    • Extension bar for hard to access areas
    • Fits tensioner pulleys with 13mm-16mm, 18mm hex, or 3/8″ and 1/2″ square drives.
    • For hard to access tensioners, there are 13mm and 15mm, 12-point wrenches built into the handle.
    • 13mm, 14mm, and 15mm crows foot wrenches also included.

    UPC: 047084007389
    Shipping weight: 4.57lbs

    738 Replacement Parts

    Quick View
  • Subaru® Stretch Belt Installer

    Subaru® Stretch Belt Installer

    $24.90

    Part No: 737

    Subaru® Stretch Belt Installer

    $24.90
    • All 2008 to current models of Subaru® Impreza, Outback, and Forrester feature a stretch belt.
    • When replacing these belts due to access issues traditional tools and even current stretch belt tools will not work.
    • Only tool on the market for this job

    UPC: 047084007372
    Shipping weight: .15lb

    Quick View
  • Stretch Belt Installation Tool

    Stretch Belt Installation Tool

    $17.58

    Part No: 736

    Stretch Belt Installation Tool

    $17.58
    • Quickly and easily installs Stretch Belts.
    • Will not damage stretch belts during installation.
    • Stretch Belts are being used more often in new vehicles and this tool is necessary in most applications.
    • Eliminates the belt tensioner.
    • Installation can be difficult because if the belt is twisted it can be damaged. This tool prevents that potential damage.
    • Patented

    UPC: 047084007365
    Shipping weight: .1lbs

    Quick View
  • Euro Stretch Belt Installation Tool

    Euro Stretch Belt Installation Tool

    $20.85

    Part No: 735

    Euro Stretch Belt Installation Tool

    $20.85
    • Larger with different pin configuration to accommodate larger pulleys with different designs found on many European vehicles.
    • Quickly and easily installs stretch belts.
    • Will not damage stretch belts during installation.
    • Stretch Belts are being used more often in new vehicles and this tool is necessary in most applications.
    • Eliminates the belt tensioner.
    • Installation can be difficult because if the belt is twisted it can be damaged. This tool prevents that potential damage.
    • Patented

    UPC: 047084007358
    Shipping weight: .2lbs

    Quick View
  • The Grabber Serpentine Belt Tool

    The Grabber Serpentine Belt Tool

    $31.87

    Part No: 734

    The Grabber Serpentine Belt Tool

    $31.87
    • Clamping jaw allows user to position serpentine belt without the belt slipping out of the tool.
    • Tru-grip and long reach allows belt routing in tight access areas that would normally be difficult if not impossible.
    • Body made of light-weight alloy steel for durability and strength.
    • Ergonomic handle provides comfort and ease in use acting as an extension of the users hand.
    • Patent Pending

    UPC: 047084007341
    Shipping weight: .95lb

    Quick View
  • two-and-three-pin-adjustable-brake-piston-tool

    2 and 3 Pin Adjustable Brake Caliper Turn Back Tool

    $65.93

    Part No: 723

    two-and-three-pin-adjustable-brake-piston-tool

    2 and 3 Pin Adjustable Brake Caliper Turn Back Tool

    $65.93

    The two and three pin adjustable brake caliper turn back tool is designed to rotate brake pistons back into the caliper on vehicles with self-adjusting parking brakes.

    • Tool has one side with 2 pins and other side has 3 pins
    • Replaces kits that contain up to 20 parts by having universally adjustable 2 and 3 pin configurations
    • Use with 1/4″ ratchet or breaker bar
    • Works on both right and left hand pistons
    • Will work on most domestic and import vehicles
    • Closed spread O.D.: 21mm (.826″)
    • Open spread O.D.: 40mm (1.574″)

    UPC: 047084007235
    Shipping weight: .4lbs

    723 Two & Three Pin Brake Tool Flyer

    Also available:
    724 – 2 and 3 Pin Adjustable Brake Caliper Turn Back Tool Set
    725 – 2 Pin Adjustable Brake Caliper Turn Back Tool
    726 – 3 Pin Adjustable Brake Caliper Turn Back Tool

    Quick View
  • Disc Brake Piston Remover

    Disc Brake Piston Remover

    $11.23

    Part No: 722

    Disc Brake Piston Remover

    $11.23
    • Rotates the parking brake-activated piston back into caliper cylinder when replacing worn pads.
    • Used on most import Ford®, Chrysler®, and some GM® vehicles equipped with four wheel disc brakes.
    • Use with 3/8″ drive.

    UPC: 047084007228
    Shipping weight: .15lb

    Quick View
  • Extended Razor Blade Scraper

    Extended Razor Blade Scraper

    $13.66

    Part No: 717

    Extended Razor Blade Scraper

    $13.66
    • 12″ (305mm) long extended-reach inspection sticker remover is a must for long sloped windshields
    • Blade clamp is screw-tightened to prevent the blade from popping out
    • Includes: One Poly guard blade and two standard single-edge blades inside storage handle.

    UPC: 047084007174
    Shipping weight: .35lbs

    Quick View
  • Poly Guard Blades

    Poly Guard Blades

    $3.40

    Part No: 709

    Poly Guard Blades

    $3.40
    • Used to scrape in scratch risk areas.
    • Can be used in a number of our scraping tools.
    • 5 pack

    UPC: 047084007099
    Shipping weight: .05lbs

    Quick View
  • Disc Brake Pad Spreader

    Disc Brake Pad Spreader

    $39.25

    Part No: 703

    Disc Brake Pad Spreader

    $39.25
    • Used for easy efficient brake pad installation
    • Works on all standard and four-piston caliper disc brakes
    • Cuts installation time dramatically
    • Tool fits between the two new pads being installed then expands to retract the piston
    • Leaves both hands free to slide the caliper over the rotor
    • After it’s started, the spreader is removed and you can slide the caliper over the rotor

    UPC: 047084007037
    Shipping weight: .6lbs

    Quick View