Products
Showing 61–72 of 318 resultsSorted by price: high to low
-
Light-Duty U-Joint Puller
$90.27Part No: 905CV
Light-Duty U-Joint Puller
$90.27The ideal solution for disassembling seized, stubborn U-joints quickly and easily of virtually all truck, medium-duty trucks, buses, and farm equipment. This puller eliminates dangerous vise-and-socket or hammering removal methods. It will allow the user to remove U-joints without damaging the driveshaft, yokes, joints or bearing cups. It also eliminates the possibility of injury using other unsafe methods. Applications for this tool include U-joints with bearing cups 1” to 1.25” O.D. Our pullers are made of high-grade materials to ensure durability and strength.
- For disassembling seized U-joints of virtually all cars, light-duty trucks and farm machinery
- Applicable to bearing cups 1” – 1.25” outer diameter
- Each component is manufactured from high-grade materials for strength and durability
- Eliminates the needs to employ dangerous and less effective methods like hammer-and-vise with a higher potential of damaging components
UPC: 047084009055
Shipping Weight: 3.22lbs.Quick View -
15 PC Light Duty Slide Hammer and Puller Set
$90.00Part No: 49700CV
15 PC Light Duty Slide Hammer and Puller Set
$90.00A versatile tool that can be used in many ways. The 2 lb slide hammer and an array of attachments can be utilized to aid in pulling seals, bearings, pressed studs, or even for straightening body panels.
- Slide hammer and accessories can be used in many applications
- Capable of inside spreads from 3/8″ to 1-1/4 and outer spreads up to 3″
- Puller reaches depths up to 2-1/2″
- All components are in a blow-molded case for easy storage and organization
UPC: 047084497005
Shipping Weight: 5.37lbsQuick View -
Crank Bolt Socket Set
$90.00Part No: 980
Crank Bolt Socket Set
$90.00- Deep counter-weighted sockets to add more torque to break loose stubborn crank bolts specifically for Honda® and Toyota®. The set includes 17mm, 19mm, 21mm.
- Applications:
- Honda/Acura®, models: Accord, Civic, Pilot, CRV, Odyssey, CL TL Integra, MDX, vehicles
- Toyota/Lexus® models: Camry, Corolla, 4Runner, Sequoia, ES300, LS400 vehicles
- Any vehicle with a 17, 19, or 21mm crank bolt
UPC: 047084009802
Shipping weight: 6.25lbsQuick View -
Amp Hound
$90.00Part No: 74
Amp Hound
$90.00The Amp Hound is designed to drastically reduce the amount of time needed to find current in all ATM, ATO, and MAXI type fused circuits. An audible beep instantly tells you if there is any current in any circuit.
- Fuses do not need to be removed to read current, check the entire fuse block quickly
- Easily find the parasitic drain
- Battery operated with an automatic shut-off
- Use standard test leads to touch the top of the Fuse
- Patent Pending
- Replacement leads: 74-2
- 1 year warranty
UPC: 047084000748
Shipping Weight: .7lbsQuick View -
6 PC Double Flip Socket Set
$89.99Part No: 96110CV
6 PC Double Flip Socket Set
$89.99The 6 piece double flip socket set is designed to easily remove damaged lug nut, using the 6 fluted twist socket end. Flip socket to other end and use a traditional 6 point to remove and install lug nuts. A 1/2″ Dr. 3″ extension bar is recommended to use during operation.
- Standard 6 Point and 6 fluted twist flip socket design
- 6 fluted twist end is designed to remove damaged lug nuts
- Made from Chrome molybdenum steel for strength and durability
- Black oxide coating resists corrosion
- 1/2″ Dr. 3″ Extension Bar included
- Set Includes: 17MM Double Flip Socket, 19MM Double Flip Socket, 13/16″ Double Flip Socket, 21MM Double Flip Socket, 7/8″ Double Flip Socket, 1/2″ Dr. 3″ Extension Bar
UPC: 047084961100
Shipping Weight: 2.74lbs6PC DOUBLE FLIP SOCKET SET INSTRUCTIONS
96110 6 PC Flip Socket Set Flyer
Also available:
96100 – 5 PC Lug & Lock Flip Socket Set
96120 – 4 PC Half Size Metric Flip Socket SetQuick View -
Sale!
16 PC Master Wheel Locking Nut Key Set
Original price was: $119.99.$89.99Current price is: $89.99.Part No: 75510CV
16 PC Master Wheel Locking Nut Key Set
Original price was: $119.99.$89.99Current price is: $89.99.Locking lug nuts are a great deterrent of wheel theft, but for mechanics, they can quickly make an easy job more difficult. This set makes removing wheel locks simple. This set consists of 8 internally splined bits along with 8 hex and star bits.
- Designed for removing many OEM and aftermarket specific locking wheel lug nuts
- Reduces chances of damaging lug nuts or wheels
- Chrome-vanadium construction and rust-resistant, black oxide finish
- Contains eight inner-splined keys and eight outer-splined keys
- All organized in a blow-molded case
Inner-splined sizes:
5-spline Short 5/8″, 6-spline 41/64″, 6-spline 45/64″, 7-spline Medium 5/8″, 7-spline Short 11/16″,
7-spline Long 3/4″, 12-spline 11/16″, and 12-spline 13/16″Outer-splined sizes:
8-pt Star 7/16″, 8-pt Star Lug 5/8″, 9-pt Star Lugs 1/2″, 10-pt Star Lug 1/2″, Fluted Hex 12mm Outer,
Hex Lug 12mm, Hex Lug 15mm, and Hex Lug 9/16″UPC: 047084755105
Shipping Weight: 5.75lbsQuick View -
Coil Spring Clamps
$88.49Part No: 91000
Coil Spring Clamps
$88.49- Three piece, heavy-duty tool allows for easy removal or installation, where removal of spring through the center is not possible.
- Set clamps in any position.
- Tool comes with three safety U-Bolts.
- Not for use with impact tools.
UPC: 047084910009
Shipping weight: 6.45lbsQuick View -
Ratcheting Harmonic Balance Puller
$88.00Part No: 38000CV
Ratcheting Harmonic Balance Puller
$88.00Remove harmonic balancers without the hassle of trying to start bolts or the frustration of positioning multi-jointed puller legs.
- Three ratcheting legs with puller feet eliminate the need for bolts
- No need to remove the radiator or other components with this compact design
- Legs quickly adjust and hold their position
- Push turn click design
Applications:
FORD 5.0 Coyote
GM 5.3L, 5.7(LS1), 6.0(LS2), 6.2(LS3), and 7.0L
MISC Most three and six spoke harmonic balancers/pulleysUPC: 047084380000
Shipping Weight: 2.5lbsQuick View -
SAE Tube Service Set
$86.94Part No: 82800
SAE Tube Service Set
$86.94This kit features the tools that a technician will need to make SAE single and double flares on soft steel or copper tubing.
- Double flaring tool (163) for making single and double flares on soft steel or copper tubing.
- Works on 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ tubing for single or double flares.
- (151) Mini Tube cutter to cut 1/8″ – 5/8″ tubing
- (758) Heavy Duty Tube Bender, plier type bender that bends steel tubing 3/16″, 1/4″, 5/16″ and 3/8″ without kinking or collapsing.
- A reamer to de-burr and cut tubing to ensure better flares
UPC: 047084828007
Shipping weight: 4.7lbsQuick View -
Harmonic Balancer Puller
$86.94Part No: 386
Harmonic Balancer Puller
$86.94Designed for removing damper pulleys in tight engine compartments, without removing the radiator. The kit contains the 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8″ square drive for ratchet use, and a 3/4″ hex for wrench or socket use.
- Applications:
- GM 2000 Generation III 4.8L, 5.3L, 5.7L, 6.0L and 8.1L V8s
- Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988
- Chevrolet trucks 2003 – later 4.2L, I6, 2004 – current 3.5L, I5 and 2005 – current 2.8L I4
- Chrysler engines 1990 – later, including 2.0L, 2.4L – 4s; plus 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s
- Ford 1995 – later V8 engines with 3 spoke pressed on damper
- Mitsubishi Eclipse 1995 – 1999 2.0L DOHC non-turbo
UPC: 047084003862
Shipping Weight: 2.9lbsQuick View - Applications:
-
Two & Three Jaw Adjustable Combination Puller, 8″ Spread
$86.72Part No: 952
Two & Three Jaw Adjustable Combination Puller, 8″ Spread
$86.72These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
- 5-ton
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components are heat-treated
- 5-1/2″, 8″ spread, center screw 9/16″- 20 x 6-3/8″
UPC: 047084009529
Shipping weight: 3.7lbs952 Two & Three Jaw Combination Puller Flyer
Also available:
134 Two & Three Jaw Combination Puller
951 Two & Three Jaw Combination Reversible PullerQuick View -
Rear Axle Bearing Puller Set
$85.00Part No: 91800CV
Rear Axle Bearing Puller Set
$85.00Designed to remove flange type, semi-floating rear axle bearings in most late model, rear-wheel drive cars and light-trucks.
• Includes 3 bearing pullers with a range from 1″ – 2-7/8″
• For flange-type, semi-floating bearings
• Designed to capture rear axle bearings firmly
• Comes in a blow-molded caseUPC: 047084918005
Shipping Weight: 2.9lbsQuick View
