CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Products

Showing 277–288 of 319 resultsSorted by price: low to high

  • 6 PC Diesel Injector Line Socket Set

    6 PC Diesel Injector Line Socket Set

    $120.87

    Part No: 39660CV

    6 PC Diesel Injector Line Socket Set

    $120.87

    The fuel injector line flex head socket set, is designed to loosen and tighten injector line fasteners found on most diesel engines. Flexible head allows 90° access and 6PT crowsfoot head applies a secure grip without damaging fuel line fastener.

    • Flex head function allows the user to apply leverage and access at any desired angle
    • 6PT Crows foot socket prevents fastener round-off
    • Robust, chrome-moly construction and corrosion-resistant finish
    • 12mm & 14mm flex head sockets come with 3/8″ Dr.
    • 16mm, 17mm, 18mm &19mm flex head sockets come with 1/2″ Dr.
    • Applications: Diesel and gasoline fuel injection systems, hydraulic brake lines, power steering piping, EGR system piping, transmission lines, and other flare nut fittings

    UPC: 047084396605
    Shipping weight: 2.25lbs

    39660CV Breakdown

    39660 6 PC Diesel Flex Head Injector Line Socket Set Flyer

    Quick View
  • Ford® Triton Spark Plug Extractor Master Set

    Ford® Triton Spark Plug Extractor Master Set

    $121.59

    Part No: 39500

    Ford® Triton Spark Plug Extractor Master Set

    $121.59

    In some cases the porcelain will break off in the sleeve and will need to be extracted. This Tool is used to extract the broken porcelain or seized sleeves from broken spark plugs in 2003 to current Ford® Triton Engines. Unlike other tools that tell you to push the porcelain through the sleeve (Ford® says specifically not to do this), this tool adheres to the porcelain using a special perma-bond and then allows a user to extract the broken porcelain from the sleeve. In combination with the porcelain extractor, this combo tool also works to extract frozen and broken off spark plug sleeves for the same model Ford® Triton Engines.

    • Provides an effective method to thoroughly extract broken porcelain and other debris that occurs when removing spark, preventing damage or a failed repair
    • Specially machined guide works with extra long tap and extractor to make sure the job is done easily and quickly

    UPC: 047084395004
    Shipping weight: 1.5lbs

    39500 Ford Triton Spark Plug Porcelain & Sleeve Extractor Kit Instructions

    39500 Ford Triton Spark Plug Porcelain and Sleeve Extractor Breakdown

    39300 Three Valve Ford Triton Insert Repair Kit Flyer

    Quick View
  • 5 PC Magnetic Tool Box Tray Set

    5 PC Magnetic Tool Box Tray Set

    $136.81

    Part No: 90950CV

    5 PC Magnetic Tool Box Tray Set

    $136.81

    The 5 piece magnetic toolbox tray set, comes with heavy-duty, non-marring rubber coated magnets that will not scratch any metal surface applied to. The 6″ (Part #90941CV) and 12″ (Part #90942CV) magnetic shelf trays easily holds fasteners, small parts and tools by any work area. The Magnetic spray can tray (Part #90943CV) easily holds 3 spray cans and 7 various sized screwdrivers, while the pair of magnetic paper towel (Part #90944CV), easily holds a common sized roll of paper towel, roll of shop towels by any work area and the magnetic vinyl glove holding tray (Part #90945CV) helps keep glove boxes neat where you need them the most. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

    • Heavy-duty, non-marring rubber coated magnets
    • Industrial-grade, powder coating finish resists rust and corrosion
    • Paper Towel holder will adjust to any length roll
    • 3 spray can holder tray with 7 various sized screwdriver holes
    • Adjustable side springs to hold glove boxes in place

    UPC: 047084909508
    Shipping weight: 10lbs

    90950 5PC Magnetic Tool Box Tray Set Breakdown

    90950 5 PC Magnetic Tool Box Accessory Set Flyer

    Available separately:
    90941 – 6″ Magnetic Tool Box Shelf
    90942 – 12″ Magnetic Tool Box Shelf
    90943 – Magnetic Spray Can Holder
    90944 – Magnetic Paper Towel Holder
    90945 – Magnetic Glove Box Holder

    Quick View
  • Master Line Disconnect Tool Set

    Master Line Disconnect Tool Set

    $137.36

    Part No: 683

    Master Line Disconnect Tool Set

    $137.36

    The most complete disconnect set on the market

    • Comes in a heavy duty case for easy access and easy storage
    • No more random disconnect tools laying around to be lost. All your disconnect needs in one place!

    UPC: 047084006832
    Shipping weight: 6.49lbs

    683 – Disconnect Tool Set Breakdown & Application Chart

    Quick View
  • 11 PC Oxygen Sensor Socket Set

    11 PC Oxygen Sensor Socket Set

    $137.36

    Part No: 84100CV

    11 PC Oxygen Sensor Socket Set

    $137.36

    The 84100, 11PC Oxygen Sensor Socket Set, provides an easy method to remove and install various sensors, sending unit, vacuum switches and Injectors on most domestic and import vehicles. Offset sockets are comprised of SAE and Metric sized sockets, to be used with 3/8″ or 1/2″ Drive ratchet and breaker bars. Some sockets come with a hex bottom to be used with a combination wrench.

    • Provides a method for removal and installation without damage to sensor
    • Includes the most popular sizes of oxygen sensor sockets
    • Comprised of SAE and metric sizes
    • Blow molded case included
    • Not to be used with impact tools

    Includes:
    1/2″ Dr x 29mm x 6pt x 90mm
    3/8″ Dr x 7/8″ x 6pt x 90mm
    1/2″ Dr x 27mm x 12pt x 78mm
    3/8″ Dr x 7/8″ x 6pt x 80mm
    3/8″ Dr x 1″ & 1-1/16 ” x 74mm
    1/2″ Dr x 7/8″  x  50mm
    3/8″ Dr  x  7/8″ x  50mm
    1/2″ Dr x   1″ x  7/8″  6pt
    1/2″ Dr  x  22  x  6pt  x  88mm
    3/8″ Dr  x 22 x  6pt offset, deep
    Sensor Thread Chaser  M18 x 1.5

    UPC: 047084841006
    Shipping weight: 8.2lbs

    84100CV Breakdown

    84100 11 PC O2 Sensor Socket Set Flyer

    Also available:
    842 – 7 PC Oxygen Sensor Socket Set

    Quick View
  • 22 PC Alternator Coupler Pulley (ADP) Kit

    22 PC Alternator Coupler Pulley (ADP) Kit

    $142.86

    Part No: 750

    22 PC Alternator Coupler Pulley (ADP) Kit

    $142.86

    The 22 PC Alternator Coupler Pulley (ADP) Kit can be used to service both OWC (One-Way Clutch) and OAD (Overrunning Alternator Decoupler) style pulleys. OWC’s were first used in 1997 followed by the OAD in 1999. Today, more and more vehicle manufacturers are recognizing the performance gains achieved with these pulleys and have designed them into their belt drive systems.

    • To remove these pulleys, the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counterclockwise, depending on the manufacturer. The opposite would be used in the installation
    • Will service vehicles included, but are not limited to: Audi®, BMW®, Buick®, Cadillac®, Chevrolet®, Chrysler®, Citroen®, Dodge®, Fiat®, Ford®, Honda®, Lexus®, Mercury®, Mercedes-Benz® Opel®, Pontiac®, Peugeot®, Porsche®, Renault®, Saturn®, Seat®, Scion®, Toyota®, and VW®
    • Eliminates the need to shop around for hard-to-find OWC and OAD tools

    UPC: 047084007501
    Shipping weight: 4.7lbs

    750 Instructions

     

    Quick View
  • Universal Torsion Bar Unloading Tool

    Universal Torsion Bar Unloading Tool

    $142.86

    Part No: 200CV

    Universal Torsion Bar Unloading Tool

    $142.86

    This tool is designed to take the pressure off the torsion bar arm and allow for removal of the torsion bar on various GM and non-GM vehicles with heavy duty chassis, manufactured from 1988-2003.

    • Includes an adapter for using tool on non-GM applications
    • Durable blow-molded case included

    APPLICATIONS:

    • 1988 and up GMC and Chevrolet 1/2-ton, 3/4-ton, and 1-ton trucks
    • 2011 and up GM HD trucks, S-10 Blazers, S-15 Jimmys, and 4WD trucks with 4.3L engines
    • GM K-3500 series with HD chassis, including GM 5-lug, 6-lug, and 8-lug vehicles

    UPC: 047084002001
    Shipping Weight: 9.01lbs

    200 Universal Torsion Bar Unloading Tool Breakdown

    200 Universal Torsion Bar Unloading Tool Instructions

    200 Universal Torsion Bar Unloading Tool Flyer

    Quick View
  • 5-Ton Bar Type Puller Bearing Separator Set

    5-Ton Bar Type Puller Bearing Separator Set

    $148.22

    Part No: 502CV

    5-Ton Bar Type Puller Bearing Separator Set

    $148.22

    This set includes two of our most popular bearing splitters (2″ and 3″), four sets of hex push-puller legs, and a bar-type puller head with a 9/16″ forcing screw. Separator tools can be used with bar puller and legs for a wide variety of pulling jobs. The 5″ puller cross-bar with a 6-1/4″ forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools.

    • Includes a 2″ and 3″ puller
    • Includes 4 sets of hex push-puller legs
    • Separator tools can be used with bar pullers and legs or by themselves
    • 5″ puller cross-bar can be used separately or in combination with pullers

    UPC: 047084005026
    Shipping Weight: 10.3lbs

    502 Breakdown

    502 5-Ton Bar Type Puller & Bearing Separator Set Flyer

    Quick View
  • Hub Puller

    Hub Puller

    $148.35

    Part No: 94800

    Hub Puller

    $148.35
    • Removes wheel hubs mounted on tapered axles and press fit rear brake drums
    • Can be adjusted by legs to an 8″ diameter bolt circle
    • Heavy-duty construction, made of alloy steel and drop forged
    • Center screw: 1″-14″ x 9″  Hex Head: 1″-1/8″

    UPC: 047084948002
    Shipping weight: 10.75lbs

    Quick View
  • 6 PC 4WD Locknut Socket Set

    6 PC 4WD Locknut Socket Set

    $152.84

    Part No: 839CV

    6 PC 4WD Locknut Socket Set

    $152.84

    This high-quality steel, six-piece socket set features 1/2” square drives that enable technicians to use ratchets, breaker bars, and torque wrenches in their applications. This convenient set will cover the most common light truck and SUV applications and includes:

    • 4-lug socket
    • 6-lug socket
    • GM® locknut socket
    • Toyota® 4-lug locknut socket
    • Ford® 4-lug locknut socket
    • FWD front spindle puller

    UPC: 047084008393
    Shipping weight: 13.15lbs

    839 6PC 4WD Locknut Socket Set Flyer

    839 – 6 PC 4WD Locknut Socket Set Replacement Parts

    Quick View
  • 10 Ton Push Puller

    10 Ton Push Puller

    $153.79

    Part No: 18100CV

    10 Ton Push Puller

    $153.79

    The 10-Ton Push Puller is designed to push or pull depending on how the puller is set up. Ideally to be used with various pulling attachments when needing to remove press fitted parts such as bearings, gears and other components.

    • Designed to remove and install press to fit parts, gears, bearing and shafts
    • Can be used with bearing pullers and pulley pulling attachments
    • 10-Ton Capacity
    • Cross Bar spread range 2-1/8″-7-1/4″
    • Maximum reach of 8-1/4″
    • Heavy Duty Truck Applications

    UPC: 047084181003
    Shipping weight: 7.25lbs

    18100 – Cal-Van Instructions

    18100 10-Ton Push Puller Flyer

    Quick View
  • 6 PC Deutsch Terminal Service Set

    6 PC Deutsch Terminal Service Set

    $153.85

    Part No: 55100CV

    6 PC Deutsch Terminal Service Set

    $153.85

    Modern electrical systems have advanced far beyond basic tools and simple connectors. They require unique tools to do the job right. This set is complete with the tools needed when dealing Deutsch terminals, along with other types of open and closed barrel terminals.

    • This set contains the tools needed to crimp and release Deutsch terminals found throughout various industries
    • For use various types of open and closed barrel terminals
    • For wire ranging from 14 to 24 gauge
    • Crimpers with durable, steel construction and cushioned grips
    • Color-coded release tools have knurled handles and stainless-steel shafts

    UPC: 047084551004
    Shipping weight: 3.62lbs

    55100 6 PC Deutsch Terminal Service Set Flyer

    55100 6 PC Deutsch Terminal Service Kit Breakdown

    Also available:
    55000 – 11 PC Deutsch Terminal Service Set

    Quick View