Products
Showing 241–252 of 319 resultsSorted by price: low to high
-
Serpentine Belt Tool Set
$80.00Part No: 738
Serpentine Belt Tool Set
$80.00- Designed to remove and install serpentine belts on vehicles with spring-loaded belt tensioners
- Eases removal and installation of serpentine belt
- Extension bar for hard to access areas
- Fits tensioner pulleys with 13mm-16mm, 18mm hex, or 3/8″ and 1/2″ square drives.
- For hard to access tensioners, there are 13mm and 15mm, 12-point wrenches built into the handle.
- 13mm, 14mm, and 15mm crows foot wrenches also included.
UPC: 047084007389
Shipping weight: 4.57lbsQuick View -
Universal Caliper Turn and Push-Back Tool
$80.00Part No: 727
Universal Caliper Turn and Push-Back Tool
$80.00The Universal Caliper/Alliper tool is designed to compress a wide range of brake calipers. Reverse the head to compress front brake calipers also. Forcing screw has a 3/8″ female drive to accept ratchets for additional push back force.
- Compresses any size brake caliper, from motorcycles, standard size cars, trucks and SUVs, and even 18 wheelers
- Use with a 3/8″ ratchet
- Can also perform front brake jobs by flipping the head around
- Eliminates need for sets with high piece counts
UPC: 047084007273
Shipping weight: 1.55lbsQuick View -
13 PC Alternator Coupler Pulley (ADP) Kit
$81.66Part No: 753CV
13 PC Alternator Coupler Pulley (ADP) Kit
$81.66The 13 PC Alternator Coupler Pulley (ADP) Kit can be used to service both OWC (One-Way Clutch) and OAD (Overrunning Alternator Decoupler) style pulleys. OWC’s were first used in 1997 followed by the OAD in 1999. Today, more and more vehicle manufacturers are recognizing the performance gains achieved with these pulleys and have designed them into their belt drive systems.
- To remove these pulleys, the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counterclockwise, depending on the manufacturer. The opposite would be used in the installation
- Covers most US Euro makes and models with both on and off vehicle applications included, but not limited to: Audi®, BMW®, Buick®, Cadillac®, Chevrolet®, Chrysler® Citroen®, Dodge®, Fiat®, Ford®, Honda®, Lexus®, Mercury®, Mercedes-Benz®, Pontiac®, Porsche®, Saturn®, Scion®, Toyota®, VW®.
- Eliminates the need to shop around for hard-to-find OWC and OAD tools
UPC: 047084007532
Shipping weight: 2.65lbsQuick View -
Bearing Splitter, Medium
$81.77Part No: 509CV
Bearing Splitter, Medium
$81.77Designed to remove and pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Capacity 3″ to 4-1/2″
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
- 3 Ton Capacity
UPC: 047084005095
Shipping Weight: 4.29lbsQuick View -
Coil Spring Compressor
$82.00Part No: 510
Coil Spring Compressor
$82.00This tool removes and installs coil springs quickly and safely
- Compress coil springs on all passenger cars and pick-up trucks
- Instructions included
- Not for use with impact tools
This tool should not be used on unusually large coil springs which have a coil outside diameter larger than 5 5/8″ or a wire diameter exceeding 3/4″.
UPC: 047084005101
Shipping Weight: 3.25lbsQuick View -
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$82.17Part No: 951
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$82.17These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
- 5-ton
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components heat-treated
- 3-1/2″, 7″ spread, center screw 9/16″ – 20″ x 6-3/8″
UPC: 047084009512
Shipping weight: 3.7lbsAlso available:
134 Two & Three Jaw Combination Puller, 4″ Spread
952 Two & Three Jaw Adjustable Combination Puller, 8″ SpreadQuick View -
Large and Small OFW Set
$84.29Part No: 29200
Large and Small OFW Set
$84.29Combination set of the 302 and 29200 oil filter wrenches:
- Part #302 – Adjustable Oil Filter Pliers: Self-adjusting, spring action (NOT a slip joint) oil filter pliers allow for a full range of filter applications. Heavy-duty, forged construction with textured grip add both strengthened leverage to the tool. Fits filters from 2-1/4″ to 6″ (57mm-152mm).
- Part #29900 – Truck & Tractor Oil Filter Pliers: Spring loaded adjustable pliers can easily adjust from 3-3/4″ to 7-1/2″. Heavy forged construction creates leverage for high torque applications. Can be used in one hand applications. 299-REPAIR kit is available.
UPC: 047084292006
Shipping weight: 4.95lbsQuick View -
Rear Axle Bearing Puller Set
$85.00Part No: 91800CV
Rear Axle Bearing Puller Set
$85.00Designed to remove flange type, semi-floating rear axle bearings in most late model, rear-wheel drive cars and light-trucks.
• Includes 3 bearing pullers with a range from 1″ – 2-7/8″
• For flange-type, semi-floating bearings
• Designed to capture rear axle bearings firmly
• Comes in a blow-molded caseUPC: 047084918005
Shipping Weight: 2.9lbsQuick View -
Two & Three Jaw Adjustable Combination Puller, 8″ Spread
$86.72Part No: 952
Two & Three Jaw Adjustable Combination Puller, 8″ Spread
$86.72These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
- 5-ton
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components are heat-treated
- 5-1/2″, 8″ spread, center screw 9/16″- 20 x 6-3/8″
UPC: 047084009529
Shipping weight: 3.7lbs952 Two & Three Jaw Combination Puller Flyer
Also available:
134 Two & Three Jaw Combination Puller
951 Two & Three Jaw Combination Reversible PullerQuick View -
Harmonic Balancer Puller
$86.94Part No: 386
Harmonic Balancer Puller
$86.94Designed for removing damper pulleys in tight engine compartments, without removing the radiator. The kit contains the 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8″ square dr for ratchet use and a 3/4″ hex for wrench or socket use
- Applications:
- GM 2000 Generation III 4.8L, 5.3L, 5.7L, 6.0L and 8.1L V8s
- Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988
- Chevrolet trucks 2003 – later 4.2L, I6, 2004 – current 3.5L, I5 and 2005 – current 2.8L I4
- Chrysler engines 1990 – later, including 2.0L, 2.4L – 4s; plus 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s
- Ford 1995 – later V8 engines with 3 spoke pressed on damper
- Mitsubishi Eclipse 1995 – 1999 2.0L DOHC non-turbo
UPC: 047084003862
Shipping Weight: 2.9lbsQuick View - Applications:
-
SAE Tube Service Set
$86.94Part No: 82800
SAE Tube Service Set
$86.94This kit features the tools that a technician will need to make SAE single and double flares on soft steel or copper tubing.
- Double flaring tool (163) for making single and double flares on soft steel or copper tubing.
- Works on 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ tubing for single or double flares.
- (151) Mini Tube cutter to cut 1/8″ – 5/8″ tubing
- (758) Heavy Duty Tube Bender, plier type bender that bends steel tubing 3/16″, 1/4″, 5/16″ and 3/8″ without kinking or collapsing.
- A reamer to de-burr and cut tubing to ensure better flares
UPC: 047084828007
Shipping weight: 4.7lbsQuick View -
Ratcheting Harmonic Balance Puller
$88.00Part No: 38000CV
Ratcheting Harmonic Balance Puller
$88.00Remove harmonic balancers without the hassle of trying to start bolts or the frustration of positioning multi-jointed puller legs.
- Three ratcheting legs with puller feet eliminate the need for bolts
- No need to remove the radiator or other components with this compact design
- Legs quickly adjust and hold their position
- Push turn click design
Applications:
FORD 5.0 Coyote
GM 5.3L, 5.7(LS1), 6.0(LS2), 6.2(LS3), and 7.0L
MISC Most three and six spoke harmonic balancers/pulleysUPC: 047084380000
Shipping Weight: 2.5lbsQuick View
