CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Products

  • Oetiker Clamp Pliers

    Oetiker Clamp Pliers

    $51.07

    Part No: 52CV

    Oetiker Clamp Pliers

    $51.07

    These pliers are suitable for use with Oetiker and other crimp-style clamps. The two-step function allows user to properly position clamp before tightening.

    • Suitable for 1&2 ear clamps without damaging the press points
    • For clamps on cv boots, axle coolant and fuel lines and air systems
    • Innovative head design requires less effort than other versions
    • Integrated handle stop ensures proper clamping each time

    UPC: 047084000526
    Shipping Weight: 1.2lbs

    52 Oetiker Clamp Pliers Flyer

    Quick View
  • Master In-Line Flaring Set

    Master In-Line Flaring Set

    $75.00

    Part No: 165

    Master In-Line Flaring Set

    $75.00

    The new In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping keeps flares centered and makes the job of flaring easier. Superior to bar type flaring tools.

    • The In-Line Flaring Tools unique design locks the adapters cone and tube in a perfect line making perfect factory flares every time with less risk of breaking adapters.
    • With the clamp and set screws putting pressure directly over the tube you greatly reduce the chance of the tube slipping from the clamp. Also this increases the overall life of the clamp by not wearing down the teeth inside from repeated slipping.
    • The slender low profile design of this tool allows the user to make flares on the vehicle and in tight spaces. Flares can be achieved along frame rails or areas in the engine compartment saving the user time from having to remove components or complete lines to make repairs.
    • Set includes everything needed to do the following:
    • 3/16″, 1/4″, 5/16″, 3/8″  Double and Single Flares
    • 4.75mm, 6mm, 8mm Double and Bubble Flares

    UPC: 047084001653
    Shipping Weight: 2.99lbs

    165 – Master Flaring Tool Kit Breakdown with Item Numbers

    165 – Master Flaring Kit – Instructions

    Quick View
  • 11 PC Trim Tool Kit

    11 PC Trim Tool Kit

    $50.00

    Part No: 118CV

    11 PC Trim Tool Kit

    $50.00

    The 11 Piece Trim Tool Set includes 11 specialty tools made of durable, impact-resistant nylon designed to remove trim strips, panels, wheel caps, bezels, liners, shrouds, fascia, etc.

    • Constructed of durable, impact-resistant nylon that will not damage non-metal interior trim surfaces.
    • Cloth pouch rests flat on a dashboard or fender for easy access to tools and then folds up with tools inside for storage.
    • Multiple applications

    UPC: 047084001189
    Shipped Weight: 1.4lbs

    118 – Eleven Piece Trim Tool Kit Breakdown

    118 11 PC Trim Fastener Molding Remover Set Flyer

    Also available:
    117 – 5 PC Trim Fastener & Molding Remover Set

    Quick View
  • 15 PC Light Duty Slide Hammer and Puller Set

    15 PC Light Duty Slide Hammer and Puller Set

    $90.00

    Part No: 49700CV

    15 PC Light Duty Slide Hammer and Puller Set

    $90.00

    A versatile tool that can be used in many ways. The 2 lb slide hammer and an array of attachments can be utilized to aid in pulling seals, bearings, pressed studs, or even for straightening body panels.

    • Slide hammer and accessories can be used in many applications
    • Capable of inside spreads from 3/8″ to 1-1/4 and outer spreads up to 3″
    • Puller reaches depths up to 2-1/2″
    • All components are in a blow-molded case for easy storage and organization

    UPC: 047084497005
    Shipping Weight: 5.37lbs

    49700 Parts Breakdown

    49700 Light-Duty Slide Hammer Instructions

    49700 15 PC Slide Hammer and Puller Set Flyer

    Quick View
  • 4 PC Oil Pan Plug Remover

    4 PC Oil Pan Plug Remover

    $35.00

    Part No: 38200CV

    4 PC Oil Pan Plug Remover

    $35.00

    Many Late model Ford®, Volkswagen®, Audi® and BMW® have a plastic oil pan and plastic drain plug. This tool set is specially designed to slot in and release these plugs found on many late model Ford®, Volkswagen®, Audi® and BMW® vehicles.

    • Revised to include Ford®/Lincoln® plastic oil pan drain plugs of engines: 2.7L / 2.7L (2018) / 3.0L / 3.3L / 3.5L Turbo from 9-12-2018 / 5.0L (2018)
    • Adapters will not damage drain plugs
    • Designed to slot in and easily release these plugs
    • Set comes in a hard case for easy storage

    UPC: 047084382004
    Shipping weight: .69lbs

    38200 4 PC Oil Pan Plug Remover Flyer

    Quick View
  • Hub Resurfacing Kit

    Hub Resurfacing Kit

    $27.00

    Part No: 332

    Hub Resurfacing Kit

    $27.00

    The Hub Resurfacing Kit fits your power drill to quickly sand rust off lug studs and rotors on the hub assembly.

    • Sanding pads conveniently attach with half turn thread.
    • Can be used for domestic and import vehicles with either front or rear disc brakes.
    • Kit comes complete with a holder and five sanding discs.
    • For best results, the device should be operated at speeds of 10,000 rpm or less.

    UPC: 047084003329
    Shipping Weight: .25lbs

    332 Wheel Hub Resurfacing Kit Replacement Parts

    332 Wheel Hub Resurfacing Kit Flyer

    Quick View
  • Ford® Triton Spark Plug Extractor Kit

    Ford® Triton Spark Plug Extractor Kit

    $60.00

    Part No: 39100

    Ford® Triton Spark Plug Extractor Kit

    $60.00
    • This item works to extract frozen and broken off spark plug sleeves in 2004 to present Ford® Triton Engines.
    • Specially machined guide works with extra long tap and extractor to make sure the job is done right.
    • This is a heavily requested application that will only get more popular

    UPC: 047084391006
    Shipping weight: 1.7lbs

    39100 – Instructions

    Quick View
  • 5-Ton Bar Type Puller Bearing Separator Set

    5-Ton Bar Type Puller Bearing Separator Set

    $134.88

    Part No: 502CV

    5-Ton Bar Type Puller Bearing Separator Set

    $134.88
    • Set includes two popular bearing splitters (2″ and 3″), four sets of hex push-puller legs, and a bar-type puller head with a 9/16″ forcing screw
    • Separator tools are used with bar puller and legs for a wide variety of pulling jobs
    • The 5″ puller cross-bar with a 6-1/4″ forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools

    UPC: 047084005026
    Shipping Weight: 10.3lbs

    502 Breakdown

    Quick View
  • Tight Access Drive Wrench

    Tight Access Drive Wrench

    $32.00

    Part No: 450

    Tight Access Drive Wrench

    $32.00

    A gear-driven metric wrench set solution to gain easy access to tight areas where a box type wrench would not be practical.

    • Dramatically reduce time needed to remove fasteners in awkward areas.
    • Comes in a set of five 10mm, 12mm, 13mm, 14mm, 15mm
    • Comes in a blow molded case.
    • Includes adapter for use with 3/8″ sockets.
    • Patented

    UPC: 047084004500
    Shipping Weight: 3.35lbs.

    Quick View
  • Fluted Screw Extractor Set

    Fluted Screw Extractor Set

    $17.00

    Part No: 441

    Fluted Screw Extractor Set

    $17.00

    Made from forged alloy steel, this this tapered style extractor can be used to extract broken studs, screws, pipe and pipe fittings.

    • Has gradual taper and long flutes.
    • Available as individuals:
      Part 441-1 – For Removing Screw/Stud/Bolt – 1/4″, 5/16″
      Part 441-2 – For Removing Screw/Stud/Bolt  – 3/8″
      Part 441-3 – For Removing Screw/Stud/Bolt – 7/16″
      Part 441-4 – For Removing Screw/Stud/Bolt – 1/2″, 9/16″
      Part 441-5 – For Removing Screw/Stud/Bolt – 5/8″

    UPC: 047084004418
    Shipping Weight: .3lbs

    Quick View
  • Mini Finger Ratchet

    Mini Finger Ratchet

    $16.82

    Part No: 108-BLUE

    Mini Finger Ratchet

    $16.82
    • New finger Style Ratchet
    • Small size great for tight areas
    • Aluminum Knurled outer ring for sure grip
    • Reversible Ratchet
    • 1/4″ Drive on one side to 1/4″ Hex Drive on other side
    • Blue Anodized aluminum

    UPC: 047084001080
    Shipping Weight: .15lbs

    Quick View
  • Magnetic Spray Can Holder

    Magnetic Spray Can Holder

    $41.10

    Part No: 90943CV

    Magnetic Spray Can Holder

    $41.10

    The magnetic spray can and screwdriver toolbox shelf tray, comes with heavy duty non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds 3 spray cans and 7 various sized screwdrivers and a holding weight capacity of 20.7LBS. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

    • Heavy Duty non-marring rubber coated magnets
    • Industrial Grade powder coating finish resist rust and corrosion
    • 3 spray can holder tray with 7 various sized screwdriver holes ranging from 0.28″-0.46″
    • 20.7LBS Weight Capacity

    UPC: 047084909430
    Shipping weight: 2.75lbs
    • Spray Can diameter is 2.97″

    Quick View