Products
Showing 205–216 of 319 results
-
Brake Bleeder Tank
$130.00Part No: 855
Brake Bleeder Tank
$130.00This lightweight and easy-to-use, portable tank fills and bleeds both standard and power brakes in a single operation. Tank is easily pressurized with just a few strokes of the built-in hand pump.
- Eliminates the need for a compressor
- One (1) gallon capacity features extra-long hose, quick disconnect coupler, shut-off valve and pressure gauge
UPC: 047084008553
Shipping weight: 5.4lbs855 – Brake Bleeder Tank Manual
Quick View -
Brake Anchor Pin Press
$275.99Part No: 70100CV
Brake Anchor Pin Press
$275.99The 70100, Brake Anchor Pin Press, is designed to safely and easily remove brake anchor pins and bushings on 16-1/2″ S-Cam trailers and Tractor “Q” brake systems. Eliminates dangerous alternative tool methods in needing to hammer, chisel or use a gas torch for pin and bushing removal. Heavy duty C-Frame is made from high grade steel with a 10-ton capacity.
- Removes brake anchor pins and bushings on 16-1/2″ S-Cam trailers and Tractor Q brake systems
- No need to remove hub or dust shield
- 10 Ton capacity C-Frame
- Easily removes seized anchor pins
- Design for use with 1/2″ Impact Wrench
UPC: 047084701003
Shipping weight: 7.15lbsQuick View -
Bolt Retained Cup Installer
$48.65Part No: 18510CV
Bolt Retained Cup Installer
$48.65Makes fast and easy work of installing bolt retained bearing cups of 1610 to 1880 universal joints commonly found of class 6-8 vehicles. Uses the bolt holes of the flange to ensure proper alignment of the cup and eliminates damage often caused by common installation methods.
- Easily and quickly installs the U joint bearing cups on series 1610-1880 yokes on class 6-8 vehicles
- Two guide bolts, utilizing the bolt holes of the yoke, to effortlessly achieve the proper alignment every time
- Eliminates damage to cups, seals, or needle bearings
- Impact rated
Applications: 1610-1880 Series full round yokes/Class 6-8 vehicles
UPC: 047084185100
Shipping weight: 1.5lbsQuick View -
Body Dent & Seal Puller
$40.78Part No: 49500
Body Dent & Seal Puller
$40.78Tool used to pull dented sheet metal back into position.
- Equipped with a 2-1/2 lb slide hammer
- 13″ long shaft enables high pulling force
UPC: 047084495001
Shipping weight: 3lbsAvailable on backorder
Quick View -
Body Clip Pliers
$25.00Part No: 55CV
Body Clip Pliers
$25.00No need to buy 3 sets of trim clip pliers for different applications, this one does it all. These specially designed and patented pliers will remove any clip found on trim, bumpers, etc.
- Very popular with Paint and Body.
- Steel levers enclosed in PMS plastic prevents scratches
- Tips have a special angle and size that make them the most versatile tool in the clip removal category
- These clips are found on almost every vehicle inside and out.
- Patent pending.
UPC: 047084000557
Shipping Weight: .3lbsAlso available:
56 Recessed Body Clip PliersQuick View -
BMW® AC Belt Installation Tool
$30.55Part No: 732
BMW® AC Belt Installation Tool
$30.55- Used for the installation of AC Belts on BMW® cars
- Specifically crafted for BMW® years 2006 – 2010 & 2012 – 2015 vehicles.
- Designed for use on BMW® V8 N62 Vehicles
UPC: 047084007327
Shipping weight: .2lbQuick View -
BMW Oil Cooler Line Pliers
$40.00Part No: 685
BMW Oil Cooler Line Pliers
$40.00- Releases the hydraulic cooling lines that connect to the transmission
- BMW Applications: E46, E53, E65, E66, E85, R50, R53
UPC: 047084006856
Shipping weight: .4lbsQuick View -
Blind Hole Puller Set
$200.00Part No: 29CV
Blind Hole Puller Set
$200.00- Designed for removing bearings from a recessed location, such as a pilot bearing.
- Set includes a 2-1/2 lbs. slide hammer with T-handle and four collets, for a wide range of applications with 3/8″– 1-1/4″ (10mm to 32mm) inner diameter holes
- Easy to operate. Choose the appropriate collet by application, insert the collet into the inner portion of the bearing, expand the collet, thread on the slide hammer to attach, and remove the bearing.
29 Blind Hole Puller Set Breakdown
Quick View -
Bearing Splitter, Small
$53.74Part No: 508CV
Bearing Splitter, Small
$53.74Designed to remove and pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Capacity 1-1/4″ to 2-1/4″
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
UPC: 047084005088
Shipping Weight: 1.33lbsQuick View -
Bearing Splitter, Medium
$81.77Part No: 509CV
Bearing Splitter, Medium
$81.77Designed to remove and pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Capacity 3″ to 4-1/2″
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
- 3 Ton Capacity
UPC: 047084005095
Shipping Weight: 4.29lbsQuick View -
Bearing Splitter, Large
$145.00Part No: 511
Bearing Splitter, Large
$145.00Designed to pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Designed to remove and pull bearings in tight areas
- Capacity 4″ – 6″
- Removes thin faced & cone shape gears, with a beveled edge that can be easily placed behind part to secure gripping surface
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
- Universal application
- Max spread: 8.375″
UPC: 047084005118
Shipping weight: 12lbsQuick View -
Bearing Splitter, 4 1/4″ Capacity
$61.65Part No: 503
Bearing Splitter, 4 1/4″ Capacity
$61.65For removing generator gears, bearing cones, bearings, and similar parts that ordinary puller jaws cannot reach.
- Knife edges are flush on one side for easy pulling
- Bolts are heat treated for added strength
UPC: 047084005033
Shipping Weight: 1lbQuick View
