Shop
Showing 181–189 of 319 results
-
Heavy Duty Pinch Off Pliers
$20.23Part No: 16500
Heavy Duty Pinch Off Pliers
$20.23- Eliminates the need to drain systems when servicing cooling systems.
- Pliers squeeze heater or radiator hoses shut and jaws swivel for parallel clamping.
- Automatic locking ratchet.
- May also be used to pinch off vacuum lines and fuel lines.
- For use on wire reinforced radiator hoses.
UPC: 047084165003
Shipping weight: 1.15lbsQuick View -
Heavy Duty U-Joint Puller
$178.00Part No: 199CV
Heavy Duty U-Joint Puller
$178.00A heavy-duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks and machinery.
- Manufactured from high-grade materials for strength and durability
- Engineered for use up to a 1″ Impact wrench
- Reduces damage to the driveshaft, yokes, joints or bearing cups
- For U-Joints with bearing cups 1.5″ to 2.2″ O.D.
- Eliminates dangerous vice-and-socket or hammering removal methods
Applications:
- U-Joints with bearing cups 1.5″ to 2.2″ O.D
- Spicer 1610, 1710, 1760, 1810, 1880 Series
- Spicer SPL 140, 170, & 250 Life Series
- Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
- Meritor RPL 20, 25 Permalube™ Series
UPC: 047084001998
Shipping Weight: 11.85lbsQuick View -
Heavy Duty Yoke Puller
$325.00Part No: 497CV
Heavy Duty Yoke Puller
$325.00Simplifies and expedites the removal of heavy-duty yokes on driveshafts, transmissions, and drive axles without damage to yokes or other components. Also, the caps are designed with flexibility in mind to service an extensive range of class 6-8 trucks.
- Fits on multiple Spicer full and half round yokes
- Fits on Meritor (Rockwell) RPL 20 & 25 series
- Manufactured from high grade steel
- Removal on yokes with bearing diameters between 1-7/8″ – 2-3/16″
UPC: 047084004975
Shipping Weight: 12.75lbsQuick View -
Heavy-Duty Bearing Cup Installer
$165.00Part No: 20300CV
Heavy-Duty Bearing Cup Installer
$165.00Accurately install bearing cups in minutes into the Dana/Spicer SPL Life Series quick-disconnect u-joints. The press plate and specific adapters make proper installation easy every time while also reducing the risk of damage to the driveshaft, yokes, and joints.
- Three adapters to fit SPL 140, 170, 250 Series drivelines
- Use on quick disconnect universal joint only
- Safer alternative to makeshift methods
- Can be used with hand and air tools
- Great partner tool for Heavy Duty U-Joint Puller (Part No.199) and Heavy Duty Yoke Puller (Part No. 497)
- Applications:
- Dana®/Spicer® SPL 140, 170, and 250 Series U-joints found in class 6-8 commercial vehicles and equipment
UPC: 047084203002
Shipping weight: 12.5lbs20300CV Heavy Duty Bearing Cup Installer Instructions
Quick View -
Heavy-Duty Inner Tie Rod Wrench
$65.00Part No: 947CV
Heavy-Duty Inner Tie Rod Wrench
$65.00Works on multiple inner tie rod bars, including hex, round with flats and round with no flats. Accepts larger tie rod tubes than most other similarly designed tools, ranging from 25MM-55MM.
- Works to remove multiple inner tie rods of cars, light trucks, and SUV’s, including the hex tubes, round tubes with flats, and round tubes with no flats, without having to the completely remove the tie rod assembly
- Accepts larger tie rod tubes than most other similarly designed tools, ranging from 25mm-55mm
- Fixed position rings provide added strength and durability
- Designed to use in limited access areas
- Patented, force-multiplying cam design
UPC: 047084009475
Shipping Weight: 1.5lbsQuick View -
Heavy-Duty Magnetic Extendable Pick Up Tool
$7.41Part No: 23CV
Heavy-Duty Magnetic Extendable Pick Up Tool
$7.41Get the reach and strength you need with a telescoping magnet pick up tool with an ergonomic, textured grip and 16-pound lifting capacity.
• Extends from 8-1/4″ to 30-3/4″, giving access to the hardest to reach areas
• Shielded magnet with 16 lbs. of lifting power
• Ergonomic and cushion handle has a textured surface for grip, even with wet or oil-covered handsUPC: 047084000236
Shipping Weight: .25lbsAvailable on backorder
Quick View -
Heavy-Duty Strap Oil Filter Wrench
$33.00Part No: 803
Heavy-Duty Strap Oil Filter Wrench
$33.00- This deluxe wrench adjusts quickly to any spin-on filter up to 9″ (228mm) in diameter
- Features 3/8″ and 1/2″ forged driver and heavy-duty strap for high torque requirements.
UPC: 047084008034
Shipping weight: .7lbsQuick View -
Heavy-Duty Three Legged Oil Filter Wrench
$25.75Part No: 987
Heavy-Duty Three Legged Oil Filter Wrench
$25.75- This three leg design is ideal for removing spin-on filters in tight access areas.
- No handle to interfere with removal.
- Long serrated legs driven by a 3/8″ extension and ratchet wrap around the filter.
- Fits filters with diameter of 2-1/2″ to 4-3/4″ (64mm-121mm).
UPC: 047084009871
Shipping weight: 1.2lbsQuick View -
Heavy-Duty Truck Oil Filter Wrench 4-1/8″ to 4-21/32″
$36.25Part No: 891
Heavy-Duty Truck Oil Filter Wrench 4-1/8″ to 4-21/32″
$36.25- Wide 1-1/2″ steel band designed to withstand the high torque requirements of truck, bus, RV, and heavy-duty equipment filters.
- Use with 1/2″ square drive tool
- Fits filters 4-1/8″ to 4-21/32″ (105mm-118mm) in diameter
UPC: 047084008911
Shipping weight: 1.15lbsAlso available:
Quick View
