Shop
Showing 172–180 of 317 results
-
Ford® Triton Spark Plug Thread Repair Kit, 2 Valve
$378.00Part No: 38900
Ford® Triton Spark Plug Thread Repair Kit, 2 Valve
$378.00Designed to aid in repairing Ford® Triton engines modular cylinders heads (1996-2003). Average repair time as short as 25 minutes.
- A quality foolproof repair system that is cost-effective and fast
- High-quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer
- Works with Ford® Triton Motors ’96 to ’03
- Works with 4.6L, 5.4L, and 6.8L engines
- 14mm x 1.25 insert
- 3/4″ – 16 OD
- 389-100 Replacement inserts, 2 Valve Replacement Insert
UPC: 047084389003
Shipping Weight: 3.03lbs38900CV – Ford Triton Insert Installer Instructions
38900 – Ford Triton Spark Plug Thread Repair Kit (Replacement Parts)
38900 Two Valve Ford Triton Insert Repair Kit Flyer
Also available:
39300 Ford® Triton Spark Plug Thread Repair Kit, 3 ValveQuick View -
Ford® Triton Spark Plug Thread Repair Kit, 3 Valve
$267.00Part No: 39300
Ford® Triton Spark Plug Thread Repair Kit, 3 Valve
$267.00The spark plug tends to break off in the cylinder head during maintenance. If this problem is not repaired properly it can result in damaged or unusable spark plug threads and in extreme cases the possibility of a spark plug blowout. Applicable in three-valve 5.4L and 6.8L gasoline engines built before 10/9/07 and three-valve 4.6L engines built before 11/30/07 found in many 2004–2008 Ford®, Lincoln®, and Mercury® vehicles. Repair those damaged threads or blowouts in 30 minutes or less per cylinder!
- This kit will allow the user, with simple step-by-step instructions, to repair those damaged threads in 30 minutes or less per cylinder
- Saves time and money
- Works with Ford® Triton Motors ’04 to ’08
- Works with 4.6L, 5.4L, and 6.8L engines
- 16mm x 1.5 insert
- 3/4″ – 16 OD
- 393-100 Replacement inserts, 3 Valve Replacement Insert
UPC: 047084393000
Shipping Weight: 1.38lbs39300 – Three Valve Ford Triton Insert Kit Instructions
39300 Three Valve Ford Triton Spark Plug Repair Kit Breakdown
39300 Three Valve Ford Triton Insert Repair Kit Flyer
Also available:
38900 – Ford® Triton Spark Plug Thread Repair Kit, 2 ValveQuick View -
Front End Service Kit
$164.84Part No: 185CV
Front End Service Kit
$164.84The Front End Service Kit Includes five tools used in the servicing of ball joints, pitman arms, and tie rods on most vehicles. Constructed from steel alloy and chrome plated for durability and longevity.
Contains:
- A large and small Pitman arm puller for ball Joint applications.
- Three different tie rod pullers
- One ball joint separator
- Comes in a sturdy blow molded case
UPC: 047084001851
Shipping Weight: 12.02lbsQuick View -
Fuel Line Pliers
$53.73Part No: 689
Fuel Line Pliers
$53.73These pliers are designed for quick connect, slide and lock couplers found on fuel lines on a variety of European and Domestic vehicles.
- Applications include Audi®, GM®, Mercedes® including M- class, Toyota® and VW® models
- Also can pull fuel and vacuum hoses on Mercedes®
UPC: 047084006894
Shipping weight: .7lbsQuick View -
Fuel Pump Locking Ring Tool
$48.30Part No: 25310CV
Fuel Pump Locking Ring Tool
$48.30The Fuel Pump Lock Ring Tool is designed to quickly remove and install fuel tank lock rings when servicing fuel pump or fuel sending unit replacement. Universal design fits to any 7.25″ O.D. metal or plastic lock rings found on Ford®, Chrysler® and GM® vehicles.
- Unique design fits on multiple makes and models of fuel tank lock rings
- Easily removes and installs fuel tank lock rings when servicing fuel pump or fuel sending unit
- Allow for greater clearance on the top of fuel sending units than other versions
- Easily attach 1/2″ drive ratchet or breaker bar
- Professional grade steel with black oxide finish to resist rust and corrosion
- Applications (not limited) :
- Dodge® Ram 1500 2500 3500 4500
- Dodge® Charger Dodge Challenger SXT
- Chevy® Silverado Malibu, Maxx, Colorado, Avalanche, Trailblazer, Camaro SS
- 2005 Mercury® Montego
- 2005-2006 Pontiac® Bonneville & G6
- 2006 Chrysler® 300c
- 2011 Kia® Sorento
- Jeep® Wrangler, TJ Jeep, Compass
- Ford® Explorer, Ford F-150, Ford Ranger
- Mercury® Mariner
UPC: 047084253106
Shipping Weight: 1.15lbsQuick View -
FWD Wheel Bearing Tool Set
$183.42Part No: 904CV
FWD Wheel Bearing Tool Set
$183.42The FWD Wheel Bearing Tool Set is a comprehensive kit of tools for the fast and effective removal and installation of wheel bearings on front wheel drive vehicles.
- For use on front wheel drive cars and light trucks
- Replace wheel bearings without having to remove the steering knuckle and strut assembly
- Eliminates the need for a front-end alignment once completed
- Reduces the changes of damage to hub and bearing
- Impact rated
- Also suitable for removing and installing large industrial bearings
UPC: 047084009048
Shipping weight: 25.2lbs904 – Wheel Bearing Tool Instructions
Quick View -
GM® Thermostat Wrench
$23.08Part No: 751CV
GM® Thermostat Wrench
$23.08The GM® Thermostat Wrench is designed to work on GM® 3.1 & 3.4 liter, V6 engines. A common job on these motors, as is in all motors, is thermostat replacement and to do this you must remove the thermostat housing. In these applications, the bottom housing bolt is almost inaccessible without removing other parts – until now.
- Unique shape and design allows users to remove and install housings quickly
- 13 mm
- 12-point with special bends
- Works on GM® 3.1 and 3.4 liter, V6 engines
UPC: 047084007518
Shipping weight: .4lbsQuick View -
Harmonic Balancer Installer
$76.92Part No: 38800
Harmonic Balancer Installer
$76.92The Harmonic Balancer Installer is used to properly install harmonic balancers or drive pulleys that are pressed on one or two groove pulleys on the crankshaft.
- Safely install most engine harmonic balancer and pulleys without damaging the balancers or crankshaft ends
- Contains twelve thread adapters to fit more applications than other brands.
- Metric and SAE bolts and adapters service most engines
- Black oxide finish to resist rust
- Sizes included: M10 x 1.5, M12 x 1.5, M12 x 1.75, M14 x 1.5, M14 x 2, M16 x 1.5, M16 x 2, 7/16 – 20, 1/2 – 20, 9/16 – 18, 5/8 – 18, 3/4 – 16
- Match the crank bolt to the correct insert if needed.
- Use with Cal Van 189 Harmonic Balancer Puller – Remover
UPC: 047084388006
Shipping weight: 3.55lbs38800 Harmonic Balancer Installer Flyer
Also available:
38500 – Master Harmonic Balancer & Pulley Installer
38700 – Long Reach Harmonic Balancer and Pulley Installer
38710 – Ford® EcoBoost Long Reach Harmonic Balancer InstallerQuick View -
Harmonic Balancer Puller
$30.80Part No: 189
Harmonic Balancer Puller
$30.80The Harmonic Balancer Puller is designed to pull balancers, vibration dampers, pulleys, and gears with tapped holes. The four slots in the yoke allows the tool to be used in both two- and three-hole applications.
- Fits most domestic and import vehicles
- Center screw designed with removable, floating swivel prevents damage to shaft ends
- Yoke is forged from high-grade, heat-treated alloy steel and zinc plated for long life
- Metric and SAE bolts included
UPC: 047084001899
Shipping Weight: 2.3lbsQuick View
