Shop

Showing 136–144 of 319 results

Disc Brake & Small Engine Hone
$20.49
Part No: 357
Disc Brake & Small Engine Hone
$20.49
- Adjustable tension flex shaft cylinder hone covers 1-1/4″ to 3-1/2″ (32mm – 89mm) diameter cylinders.
- Use on most compact cars, as well as, cycles, lawnmowers, and outboard motors.
- Includes three 2″ (51mm) Medium grit stones, part 357-1.
- Replacement Stones:
  
  357-1 Replacement Stones 2″ (51mm) Medium Grit, 220-240 Grit. Set of 3.
  
  357-3 Replacement Stones 2″ (51mm) Fine Grit, 400 Grit. Set of 3.
  
  To hone disc brake cylinders larger than 1-1/4″ (32mm): 358-1 Replacement Stones 3/4″ (19mm) Fine Grit, 400 Grit. Set of 3.
UPC: 047084003572
Shipping Weight: .25lbs
Disc Brake & Small Engine Hone quantity
Quick View
Disc Brake Pad Spreader
$35.72
Part No: 703
Disc Brake Pad Spreader
$35.72
- Used for easy efficient brake pad installation
- Works on all standard and four-piston caliper disc brakes
- Cuts installation time dramatically
- Tool fits between the two new pads being installed then expands to retract the piston
- Leaves both hands free to slide the caliper over the rotor
- After it’s started, the spreader is removed and you can slide the caliper over the rotor
UPC: 047084007037
Shipping weight: .6lbs
Disc Brake Pad Spreader quantity
Quick View
Disc Brake Pad Spreader
$11.63
Part No: 702
Disc Brake Pad Spreader
$11.63
- Facilitates the quick and easy changing of disc brake pads
- Spreader will compress inner pad and reset piston for easy pad replacement
- Heavy duty construction
UPC: 047084007020
Shipping weight: .55lbs
Disc Brake Pad Spreader quantity
Quick View
Disc Brake Piston Remover
$10.22
Part No: 722
Disc Brake Piston Remover
$10.22
- Rotates the parking brake-activated piston back into caliper cylinder when replacing worn pads.
- Used on most import Ford®, Chrysler®, and some GM® vehicles equipped with four wheel disc brakes.
- Use with 3/8″ drive.
UPC: 047084007228
Shipping weight: .15lb
Disc Brake Piston Remover quantity
Quick View
Dodge® Hub Nut Socket
$14.25
Part No: 90703CV
Dodge® Hub Nut Socket
$14.25
Fits rear axle lock nuts of Dodge®/ Ram®trucks with six holes. Use this tool when removing and installing rear wheel hubs without the struggles and potential of damage other methods cause.
- Dodge® / Ram®Trucks 1500 -5500 model years 2006 –2014
- Reduces damage to components
- Great tool to use when torqueing rear wheel bearings
- Heavy-duty, one-piece construction
- Direct comparison to Mopar® 8954A
- Rust resistant finish
- Utilizes a 3/8″ square drive
Detailed Applications: (Chassis Codes: D2, DC, DD, DH, DJ, DP, DR, DS)
2006 (Ram) –System (3-differential and driveline)
2007 (Ram) –System (3-differential and driveline)
2008 (Ram) –System (3-differential and driveline)
2009 (Ram 2500/3500) –System (3-differential and driveline)
2010 (Ram Cab Chassis, 1500, 2500, 4500) –System (3-differential and driveline)
2011 (Ram 1500) –System (3-differential and driveline)
2012 (Ram 1500) –System (3-differential and driveline)
2013 (Ram HD, Cab Chassis, 2500, 4500) –System (3-differential and driveline)
2014 (Ram HD, Cab Chassis, 2500, 4500, 4500/5500 Cab Chassis) –System (3-differential and driveline)

UPC: 047084907030
Shipping Weight: .8lbs

90703 Dodge Front Hub Locknut Socket Flyer
Dodge® Hub Nut Socket quantity
Quick View
Dodge® Hub Removal Tool
$35.95
Part No: 90701CV
Dodge® Hub Removal Tool
$35.95
Uses the force from the vehicle’s power steering system to easily free the front wheel hubs, without damaging the hub or other components.
- Designed to remove the front hubs of 3/4-ton (2500) and 1-ton (3500) Dodge trucks
- Reduces the time it takes to complete front-end related jobs such as hub removal, replacing axle shafts, U-joint, and axle seals
- Replaces the 90300CV
UPC: 047084907016
Shipping weight: 1.04lbs
Dodge® Hub Removal Tool quantity
Quick View
Dodge® Wheel Hub Removal Adapter
$21.03
Part No: 90300CV
Dodge® Wheel Hub Removal Adapter
$21.03
- Designed to easily remove the front hubs of Dodge® 2500 and 3500 trucks
- Uses the force of the power steering system to loosen the hub assembly, instead of having to other methods which can possibly damage the hub assembly
- Quickly adapts for Ford and Dodge applications
- Hub Bolt size 3/4″-19MM
UPC: 047084903001
Shipping weight: 1.3lbs
Dodge® Wheel Hub Removal Adapter quantity
Quick View
Double & Bubble Flaring Tool Set
$105.17
Part No: 82900
Double & Bubble Flaring Tool Set
$105.17
This set contains the tools necessary to create single or double flares, as well as Bubble Flares, on soft steel and copper tubing.
- 2-in-1 kit contains the Double Flare Tool (163) and the Bubble Flare Tool (82700) in one convenient blow molded case.
- Single & Double Flares 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ tubing.
- Bubble Flares 4.75mm, 6mm, 8mm, 10mm tubing.
- Includes Tube Cutter (151).
UPC: 047084829004
Shipping weight: 4.4lbs
Double & Bubble Flaring Tool Set quantity
Quick View
Double Deburr Tool
$25.27
Part No: 169
Double Deburr Tool
$25.27
The success of creating a flare with a good seal depends on more than the flaring tool you use. It often comes down to preparation and finish. This tool can clean the inner and outer edges before you begin and clear up and remaining debris after. It is the perfect companion to any of our flaring tools and an upgrade to the one supplied in certain kits.
- For removing burrs of inner and outer tube diameters when performing secondary operations to tubing, steel or copper
- Aluminum, lightweight, body and a sharp, high-speed, steel cutting edges to hold up in any environment
- Inner reamer is a retractable for safety
- Works with tubing range of 1/8″ – 1/2″ (3mm – 12mm)
UPC: 047084001691
Shipping Weight: .44lbs

169 Double Deburr Flyer
Double Deburr Tool quantity
Quick View