Shop
Showing 118–126 of 320 results
-
Body Clip Pliers
$27.47Part No: 55CV
Body Clip Pliers
$27.47No need to buy 3 sets of trim clip pliers for different applications, this one does it all. These specially designed and patented pliers will remove any clip found on trim, bumpers, etc.
- Very popular with Paint and Body.
- Steel levers enclosed in PMS plastic prevents scratches
- Tips have a special angle and size that make them the most versatile tool in the clip removal category
- These clips are found on almost every vehicle inside and out.
- Patent pending.
UPC: 047084000557
Shipping Weight: .3lbsAlso available:
56 Recessed Body Clip PliersQuick View -
Body Dent & Seal Puller
$44.81Part No: 49500
Body Dent & Seal Puller
$44.81Tool used to pull dented sheet metal back into position.
- Equipped with a 2-1/2 lb slide hammer
- 13″ long shaft enables high pulling force
UPC: 047084495001
Shipping weight: 3lbsQuick View -
Bolt Retained Cup Installer
$53.46Part No: 18510CV
Bolt Retained Cup Installer
$53.46Makes fast and easy work of installing bolt retained bearing cups of 1610 to 1880 universal joints commonly found of class 6-8 vehicles. Uses the bolt holes of the flange to ensure proper alignment of the cup and eliminates damage often caused by common installation methods.
- Easily and quickly installs the U joint bearing cups on series 1610-1880 yokes on class 6-8 vehicles
- Two guide bolts, utilizing the bolt holes of the yoke, to effortlessly achieve the proper alignment every time
- Eliminates damage to cups, seals, or needle bearings
- Impact rated
Applications: 1610-1880 Series full round yokes/Class 6-8 vehicles
UPC: 047084185100
Shipping weight: 1.5lbsQuick View -
Brake Anchor Pin Press
$303.29Part No: 70100CV
Brake Anchor Pin Press
$303.29The 70100, Brake Anchor Pin Press, is designed to safely and easily remove brake anchor pins and bushings on 16-1/2″ S-Cam trailers and Tractor “Q” brake systems. Eliminates dangerous alternative tool methods in needing to hammer, chisel or use a gas torch for pin and bushing removal. Heavy duty C-Frame is made from high grade steel with a 10-ton capacity.
- Removes brake anchor pins and bushings on 16-1/2″ S-Cam trailers and Tractor Q brake systems
- No need to remove hub or dust shield
- 10 Ton capacity C-Frame
- Easily removes seized anchor pins
- Design for use with 1/2″ Impact Wrench
UPC: 047084701003
Shipping weight: 7.15lbsQuick View -
Brake Bleeder Tank
$183.21Part No: 855
Brake Bleeder Tank
$183.21This lightweight and easy-to-use, portable tank fills and bleeds both standard and power brakes in a single operation. Tank is easily pressurized with just a few strokes of the built-in hand pump.
- Eliminates the need for a compressor
- One (1) gallon capacity features extra-long hose, quick disconnect coupler, shut-off valve and pressure gauge
UPC: 047084008553
Shipping weight: 5.4lbs855 – Brake Bleeder Tank Manual
Quick View -
New!
Brake Caliper Wind Back Tool
$99.00Part No: 72800CV
Brake Caliper Wind Back Tool
$99.00The Brake Caliper Wind Back tool allows the user to work in both directions, clockwise and counterclockwise with one tool. Rear disc brake caliper is the primary function for rotating pistons back into caliper to provide clearance of replacement pads. This set can be used in conjunction with other brake caliper sets.
- Allows the user to work on clockwise, counter-clockwise and static/push-back brake calipers with one tool
- The adaptability of this tool allows it to be used on almost any automotive application
- With included adapter, it can be used in conjunction with other sets
UPC: 047084728000
Shipping weight: 1.65lbsAvailable on backorder
Quick View -
Brake Fluid Tester (DOT 3, 4, 5.1)
$58.46Part No: 66
Brake Fluid Tester (DOT 3, 4, 5.1)
$58.46This brake fluid tester gives the user a quick and easy method to accurately gauge the moisture content in all types of brake fluid (DOT 3, DOT 4, DOT 5.1).
- Ideal two-button use, the power button and a button to easily switch fluid types
- Easy-to-read LED moisture gauge
- Measurements can be shown to the customer to warrant needed service
- Self-test features will assure you are properly testing the fluid
- Uses one AAA battery
- Tester includes automatic battery shut-off
UPC: 047084000663
Shipping Weight: .25lbsQuick View -
Brake Fluid Tester (DOT 4 only)
$53.26Part No: 62CV
Brake Fluid Tester (DOT 4 only)
$53.26This tester can be used as a digital brake fluid tester, suitable for determining brake fluid quality.
- Used to quickly and accurately gauge moisture content of DOT 4 brake fluid
- Fluid quality is indicated on an easy to read LED gauge
- For professional use in automotive repair and maintenance
UPC: 047084000625
Shipping Weight: .6lbsQuick View -
Brake Line Bending Tool
$25.82Part No: 76110CV
Brake Line Bending Tool
$25.82The 76110, Brake line bending tool, is designed to align, bend and adjust brake lines up to 3/6″/4.75MM in diameter. Comes with two 90 degree bending width options and a 6MM female hex slot for a secure hold while bending brake lines. Ergonomic design is suitable for one-handed operation.
- Design to bend brake lines with a 3/16″ – 4.75mm maximum diameter
- Fitted with a 15/64″ – 6mm hex slot for holding and bending brake lines
- Two 90 degree bending width options
- Coated with an anti-corrosion electrophoretic black paint
- Ergonomic design is suitable for one handed operation
- Compact features allows user to complete brake line bends in tight fitting applications
UPC: 047084761106
Shipping Weight: .35lbsAlso available:
75902 – Tube Bend Mirror AdaptersQuick View
