CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Shop

Showing 91–99 of 310 results

  • Brake Rewind Adapter Set

    $53.74

    Part No: 724

    Brake Rewind Adapter Set

    $53.74

    FEATURES

    Adjustable 2 & 3 Pin Piston Wind-Back Tool
    • Replaces larger kits containing up to 20 parts
    • Rotates brake pistons back into the caliper on vehicles with self adjusting parking breaks
    • Fits most domestic and import vehicles

    Quick View

  • Bubble Flaring Tool

    $69.95

    Part No: 82700

    Bubble Flaring Tool

    $69.95

    FEATURES

    • Forms Bubble Flares in soft steel and copper tubing.
    • Flares metric Hydraulich brake lines used on Japanese European and domestic automobiles.
    • Works on 4.75mm, 6mm, 8mm, 10mm Tubing.
    • Makes Bubble Flares in one operation.
    Quick View

  • Bushing Driver Set

    $80.00

    Part No: 504

    Bushing Driver Set

    $80.00

    FEATURES

    • Remove or install bushings from 3⁄8” to 13⁄8” in diameter. Found in cars trucks tractors construction equipment electric motors and many other components containing bushings.
    • Includes sixteen bushing adapters ranging from 3⁄8” to 13⁄8” large medium and small driver handles.
    • Comes in a blow-molded storage case.
    Quick View

  • Clutch Alignment Tool

    $40.00

    Part No: 20

    Clutch Alignment Tool

    $40.00

    Used to align single disc clutches on most domestic and imported vehicles. Set contains 4 two-step SAE pilot bushings, 2 metric two-step pilot bushings, 1 center shaft, and a tapered alignment cone with a 1-1/8″ maximum diameter taper.

    • Designed to align clutch plates and pilot bearings accurately
    • Used to align single disc clutches on most domestic and imported vehicles
    • Contains 4 SAE two-step pilot bushings, 4 metric two-step pilot bushings, a center shaft with knurled handle, and a tapered alignment cone for up to 1-1/8” diameters.

     

    Quick View

  • Coil Spring Clamps

    $88.49

    Part No: 91000

    Coil Spring Clamps

    $88.49

    FEATURES

    • Three piece heavy duty tool allows for easy removal or installation where removal of sprin through the center is not possible.
    • Set clamps in any position.
    • Tool comes with three safety U-Bolts.
    • Not for use with impact tools.
    Quick View

  • Coil Spring Compressor

    $82.00

    Part No: 510

    Coil Spring Compressor

    $82.00

    FEATURES

    • This tool removes and installs coil springs quickly and safely
    • Compress coil springs on all passenger cars and pick-up trucks
    • Instructions included
    • Not for use with impact tools

    This tool should not be used on unusually large coil springs which have a coil outside diameter larger than 5 5/8″ or a wire diameter exceeding 3/4″.

     

    Quick View

  • Combination 6-Pt. and 12-Pt. Oxygen Sensor Wrench

    $35.00

    Part No: 844

    Combination 6-Pt. and 12-Pt. Oxygen Sensor Wrench

    $35.00

    FEATURES

    • The 12 & 6 Point Flexible Oxygen Sensor Wrench Model: 844 from Cal-Van Tools is designed for use with most oxygen sensors.
    • Double sided design allows the technician easier access with the 12 point socket and more torque with 6 point for rusted or stubborn sensors.
    • Gives technicians access to remove sensors in difficult areas.
    • Offset design allows more room and leverage in confined areas.
    Quick View

  • Constant Pressure Tube Cutter 1/8″ – 1 1/8″

    $45.00

    Part No: 158

    Constant Pressure Tube Cutter 1/8″ – 1 1/8″

    $45.00

    FEATURES

    • The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter to until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
    • The 158 can cut a range of tubing sizes from 1/8 to 1 1/8.
    • Features a replaceable blade.
    Quick View

  • Constant Pressure Tube Cutter 3/16″ – 7/8″

    $28.00

    Part No: 157

    Constant Pressure Tube Cutter 3/16″ – 7/8″

    $28.00

    FEATURES

    • The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter to until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
    • The 157 can cut a range of tubing sizes from 3/16 to 7/8.
    • Features a replaceable blade.
    Quick View