Shop

Showing 1–9 of 319 results

1.5 Liter Multi-Purpose Fluid Extractor Kit
$61.99
Part No: 85630CV
1.5 Liter Multi-Purpose Fluid Extractor Kit
$61.99
The 1.5 L Multi-purpose fluid extractor, is made from heavy duty chemical resistant polypropylene plastic. Ideal to extract oil, brake, steering fluids and anti-freeze. Includes two quick connect extension tubes for hard to reach areas and deep fluid reservoir found on all vehicles types.
- Will hold 1.5 L
- Dual measurement scale on tube determines fluid levels easily
- Safe for brake, steering, and other fluids, including anti-freeze
- Includes a 48″ pvc hose for hard to reach areas and deep fluid reservoirs
- Syringes are washable
UPC: 047084856307
Shipping Weight: 2lbs

85630CV Breakdown

85630 1.5L Multi-Purpose Fluid Extractor Flyer

Also available:
85610 – 7 oz Multi-Purpose Fluid Extractor Kit
85620 – 17 oz Multi-Purpose Fluid Extractor Kit
1.5 Liter Multi-Purpose Fluid Extractor Kit quantity
Quick View
1/2″ DR. 12 Pin Rear Axle Hub Nut Socket
$48.99
Part No: 83970CV
1/2″ DR. 12 Pin Rear Axle Hub Nut Socket
$48.99
The 1/2″ DR. 12 pin rear axle hub nut socket, is designed to remove and install rear spindle hub nuts on 2019 – current Dodge® Ram 3500 Dual rear wheel drive trucks, 4500 and 5500 chassis cab trucks.
- Remove and install rear axle retaining nuts on Dodge® Ram H.D. trucks
- Fits Rear Hubs on Ram 2019 and up 3500 dual rear wheel trucks, 4500, 5500 (D2, DD, DP) chassis cab trucks
- 1/2″ Female drive use with ratchets, breaker bars and torque wrenches
- Replaces factory OEM Tool #2066600030
- Not for use with an impact tool
UPC: 047084839706
Shipping weight: 2.01lbs

83970 Dodge 12-Pin Rear Axle Hub Nut Socket Flyer
1/2″ DR. 12 Pin Rear Axle Hub Nut Socket quantity
Quick View
10 Ton Push Puller
$139.95
Part No: 18100CV
10 Ton Push Puller
$139.95
The 10-Ton Push Puller is designed to push or pull depending on how the puller is set up. Ideally to be used with various pulling attachments when needing to remove press fitted parts such as bearings, gears and other components.
- Designed to remove and install press to fit parts, gears, bearing and shafts
- Can be used with bearing pullers and pulley pulling attachments
- 10-Ton Capacity
- Cross Bar spread range 2-1/8″-7-1/4″
- Maximum reach of 8-1/4″
- Heavy Duty Truck Applications
UPC: 047084181003
Shipping weight: 7.25lbs

18100 – Cal-Van Instructions

18100 10-Ton Push Puller Flyer
10 Ton Push Puller quantity
Quick View
11 PC Deutsch Terminal Service Set
$199.00
Part No: 55000CV
11 PC Deutsch Terminal Service Set
$199.00
The 11PC Master Terminal Service kit is for use on Deutsch open and closed barrel terminals, Weather Pack, Metri Pack, and other terminals. It is designed to crimp and release the Deutsch terminals found through various industries.

Contains:
- 3 Terminal crimping tools
- 1 Open barrel crimping tools for 14-24 gauge wire and seals
- Weather Pack crimping tool
- Weather Pack release tools
- Terminal release tools
UPC: 047084550007
Shipping weight: 6lbs

55000 11 PC. Deutsch Terminal Service Set Flyer

Also available:
55100 – 6 PC Deutsch Terminal Service Set
11 PC Deutsch Terminal Service Set quantity
Quick View
11 PC Impact Adapter Socket Set
$159.00
Part No: 48200CV
11 PC Impact Adapter Socket Set
$159.00
- 8 adapters with four drive sizes
- 3 universal joint that come in three drive sizes
- Secure connection with detent ball and pin and ring capacities
UPC: 047084482001
Shipping Weight: 3.95lbs

48200 11 PC Impact Drive Adapter Set Flyer
11 PC Impact Adapter Socket Set quantity
Quick View
11 PC Oxygen Sensor Socket Set
$125.00
Part No: 84100CV
11 PC Oxygen Sensor Socket Set
$125.00
The 84100, 11PC Oxygen Sensor Socket Set, provides an easy method to remove and install various sensors, sending unit, vacuum switches and Injectors on most domestic and import vehicles. Offset sockets are comprised of SAE and Metric sized sockets, to be used with 3/8″ or 1/2″ Drive ratchet and breaker bars. Some sockets come with a hex bottom to be used with a combination wrench.
- Provides a method for removal and installation without damage to sensor
- Includes the most popular sizes of oxygen sensor sockets
- Comprised of SAE and metric sizes
- Blow molded case included
- Not to be used with impact tools
Includes:
1/2″ Dr x 29mm x 6pt x 90mm
3/8″ Dr x 7/8″ x 6pt x 90mm
1/2″ Dr x 27mm x 12pt x 78mm
3/8″ Dr x 7/8″ x 6pt x 80mm
3/8″ Dr x 1″ & 1-1/16 ” x 74mm
1/2″ Dr x 7/8″ x 50mm
3/8″ Dr x 7/8″ x 50mm
1/2″ Dr x 1″ x 7/8″ 6pt
1/2″ Dr x 22 x 6pt x 88mm
3/8″ Dr x 22 x 6pt offset, deep
Sensor Thread Chaser M18 x 1.5

UPC: 047084841006
Shipping weight: 8.2lbs

84100CV Breakdown

84100 11 PC O2 Sensor Socket Set Flyer

Also available:
842 – 7 PC Oxygen Sensor Socket Set
11 PC Oxygen Sensor Socket Set quantity
Quick View
11 PC Trim Tool Kit
$50.00
Part No: 118CV
11 PC Trim Tool Kit
$50.00
The 11 Piece Trim Tool Set includes 11 specialty tools made of durable, impact-resistant nylon designed to remove trim strips, panels, wheel caps, bezels, liners, shrouds, fascia, etc.
- Constructed of durable, impact-resistant nylon that will not damage non-metal interior trim surfaces.
- Cloth pouch rests flat on a dashboard or fender for easy access to tools and then folds up with tools inside for storage.
- Multiple applications
UPC: 047084001189
Shipped Weight: 1.4lbs

118 – Eleven Piece Trim Tool Kit Breakdown

118 11 PC Trim Fastener Molding Remover Set Flyer

Also available:
117 – 5 PC Trim Fastener & Molding Remover Set
11 PC Trim Tool Kit quantity
Quick View
12 PC Master Back Probe Set
$41.62
Part No: 61500CV

12 PC Master Back Probe Set
$41.62

The 12PC Electrical back probe set allows easy access to electrical circuits from the back side of connectors. Designed for repair diagnostic troubleshooting, automotive testing, voltage and amperage testing while connector is plugged in. Includes two new flexible back probes that can be bent or angled in all positions without damaging the soft pvc sleeve and a 30 volt testing capacity. Set also includes two curved back probes with a 25 volt or 10 AMP test rating. All back probes are compatible with a standard 4MM plug and come with a 1 year warranty.

• Allows easy access to electrical circuits from the back side of connectors
• Compatible with standard 4MM plugs
• Easy access to check voltage or amperage while connector is plugged in
• New and improved flexible backprobes for testing up to 30 volts
• 2 curved back probes with 25 volt or 10 AMP rating
• 4MM standard banana male plugs

UPC: 047084615003
Shipping weight: .26lbs

61500 12 PC Back Probe Master Set Flyer

Also available:
611 – 17 PC Electrical Back Probe Kit
613 – 20 PC Electrical Back Probe Kit

12 PC Master Back Probe Set quantity

Quick View
12″ Magnetic Tool Box Shelf
$39.94
Part No: 90942CV

12″ Magnetic Tool Box Shelf
$39.94

The 12″ magnetic toolbox shelf tray, comes with heavy duty non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds fasteners, small parts and tools by any work area, with a 10.11LBS holding weight capacity. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.

• Heavy Duty non-marring rubber coated magnets
• Industrial Grade powder coating finish resist rust and corrosion
• 12 inch tray holds various items
• 10.11LBS Weight Capacity

UPC: 047084909423
Shipping weight: 2.1lbs

12″ Magnetic Tool Box Shelf quantity

Quick View