Products
Showing 169–180 of 318 resultsSorted by average rating
-
SAE Tube Service Set
$95.54Part No: 82800
SAE Tube Service Set
$95.54This kit features the tools that a technician will need to make SAE single and double flares on soft steel or copper tubing.
- Double flaring tool (163) for making single and double flares on soft steel or copper tubing.
- Works on 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ tubing for single or double flares.
- (151) Mini Tube cutter to cut 1/8″ – 5/8″ tubing
- (758) Heavy Duty Tube Bender, plier type bender that bends steel tubing 3/16″, 1/4″, 5/16″ and 3/8″ without kinking or collapsing.
- A reamer to de-burr and cut tubing to ensure better flares
UPC: 047084828007
Shipping weight: 4.7lbs82800 SAE Tube Service Kit Flyer
Also available:
153 Metric Double Flaring Tool
163 SAE Double Flaring Tool
82700 Metric Bubble Flaring Tool
82900 Double & Bubble Flaring Tool SetQuick View -
Metric Bubble Flaring Tool
$76.87Part No: 82700
Metric Bubble Flaring Tool
$76.87- Forms Bubble Flares in soft steel and copper tubing.
- Flares metric Hydraulic brake lines used on Japanese, European, and domestic automobiles.
- Works on 4.75mm, 6mm, 8mm, 10mm Tubing.
- Makes Bubble Flares in one operation.
UPC: 047084827000
Shipping weight: 2.75lbs82700 Metric Bubble Flare Tool Kit Breakdown
Also available:
153 Metric Double Flaring Tool
163 SAE Double Flaring Tool
82800 SAE Tube Service Set
82900 Double & Bubble Flaring Tool SetQuick View -
Scraper Set
$28.95Part No: 52600
Scraper Set
$28.95- Includes our most popular scrapers in one complete set.
- Set Includes: Two Mini Scrapers (701), One Extended Scrapers (717), and One Folding Scraper (747)
UPC: 047084526002
Shipping weight: .8lbsQuick View -
Body Dent & Seal Puller
$44.81Part No: 49500
Body Dent & Seal Puller
$44.81Tool used to pull dented sheet metal back into position.
- Equipped with a 2-1/2 lb slide hammer
- 13″ long shaft enables high pulling force
UPC: 047084495001
Shipping weight: 3lbsQuick View -
Master Ratchet Accessory Set
$65.93Part No: 48100
Master Ratchet Accessory Set
$65.93All the items you need to get to tight access areas, around corners, and adapt sockets to step up and down.
- Set Includes many popular items available from Cal Van.
- Set Includes: Twin Spin Drive Converter 1/4″ – 3/8″, Twin Spin Drive Converter 3/8″ – 1/2″, 90 Degree Angle Dr. 1/4″, 90 Degree Angle Dr. 3/8″, Finger Nut Driver with bit
UPC: 047084481004
Shipping weight: 1.4lbs48100 Master Ratchet Accessory Set Breakdown
48100 Master Ratchet Accessory Set Flyer
Quick View -
Ford® Triton Spark Plug Thread Repair Kit, 3 Valve
$267.00Part No: 39300
Ford® Triton Spark Plug Thread Repair Kit, 3 Valve
$267.00The spark plug tends to break off in the cylinder head during maintenance. If this problem is not repaired properly it can result in damaged or unusable spark plug threads and in extreme cases the possibility of a spark plug blowout. Applicable in three-valve 5.4L and 6.8L gasoline engines built before 10/9/07 and three-valve 4.6L engines built before 11/30/07 found in many 2004–2008 Ford®, Lincoln®, and Mercury® vehicles. Repair those damaged threads or blowouts in 30 minutes or less per cylinder!
- This kit will allow the user, with simple step-by-step instructions, to repair those damaged threads in 30 minutes or less per cylinder
- Saves time and money
- Works with Ford® Triton Motors ’04 to ’08
- Works with 4.6L, 5.4L, and 6.8L engines
- 16mm x 1.5 insert
- 3/4″ – 16 OD
- 393-100 Replacement inserts, 3 Valve Replacement Insert
UPC: 047084393000
Shipping Weight: 1.38lbs39300 – Three Valve Ford Triton Insert Kit Instructions
39300 Three Valve Ford Triton Spark Plug Repair Kit Breakdown
39300 Three Valve Ford Triton Insert Repair Kit Flyer
Also available:
38900 – Ford® Triton Spark Plug Thread Repair Kit, 2 ValveQuick View -
Ford® Triton Spark Plug Extractor Kit
$65.93Part No: 39100
Ford® Triton Spark Plug Extractor Kit
$65.93The Ford® Triton Spark Plug Exactor Kit works to extract frozen and broken off spark plug sleeves in 2004 to present Ford® Triton Engines.
- Specially-machined guide works with extra long tap and extractor to make sure the job is done right.
- Heavily requested application
- Recommended to use with 39200 or 39500
UPC: 047084391006
Shipping weight: 1.7lbs39100 – Ford Triton Spark Plug Extractor Kit Instructions
39100 Ford Triton Spark Plug Extractor Kit Breakdown
39100 Ford Triton Spark Plug Extractor Kit Flyer
Also available:
39200 – Ford Spark Plug Porcelain Extractor Kit
39500 – Ford® Triton Spark Plug Extractor Master SetQuick View -
Ford® Triton Spark Plug Thread Repair Kit, 2 Valve
$378.00Part No: 38900
Ford® Triton Spark Plug Thread Repair Kit, 2 Valve
$378.00Designed to aid in repairing Ford® Triton engines modular cylinders heads (1996-2003). Average repair time as short as 25 minutes.
- A quality foolproof repair system that is cost-effective and fast
- High-quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer
- Works with Ford® Triton Motors ’96 to ’03
- Works with 4.6L, 5.4L, and 6.8L engines
- 14mm x 1.25 insert
- 3/4″ – 16 OD
- 389-100 Replacement inserts, 2 Valve Replacement Insert
UPC: 047084389003
Shipping Weight: 3.03lbs38900CV – Ford Triton Insert Installer Instructions
38900 – Ford Triton Spark Plug Thread Repair Kit (Replacement Parts)
38900 Two Valve Ford Triton Insert Repair Kit Flyer
Also available:
39300 Ford® Triton Spark Plug Thread Repair Kit, 3 ValveQuick View -
Harmonic Balancer Installer
$76.92Part No: 38800
Harmonic Balancer Installer
$76.92The Harmonic Balancer Installer is used to properly install harmonic balancers or drive pulleys that are pressed on one or two groove pulleys on the crankshaft.
- Safely install most engine harmonic balancer and pulleys without damaging the balancers or crankshaft ends
- Contains twelve thread adapters to fit more applications than other brands.
- Metric and SAE bolts and adapters service most engines
- Black oxide finish to resist rust
- Sizes included: M10 x 1.5, M12 x 1.5, M12 x 1.75, M14 x 1.5, M14 x 2, M16 x 1.5, M16 x 2, 7/16 – 20, 1/2 – 20, 9/16 – 18, 5/8 – 18, 3/4 – 16
- Match the crank bolt to the correct insert if needed.
- Use with Cal Van 189 Harmonic Balancer Puller – Remover
UPC: 047084388006
Shipping weight: 3.55lbs38800 Harmonic Balancer Installer Flyer
Also available:
38500 – Master Harmonic Balancer & Pulley Installer
38700 – Long Reach Harmonic Balancer and Pulley Installer
38710 – Ford® EcoBoost Long Reach Harmonic Balancer InstallerQuick View -
Long Reach Harmonic Balancer and Pulley Installer
$82.42Part No: 38700
Long Reach Harmonic Balancer and Pulley Installer
$82.42The Long Reach Balancer – Pulley Installer is a kit for installing harmonic balancer pulleys on many popular late model Ford®, GM®, Dodge®, and Chrysler® vehicles with V6 and V8 engines that have recessed threads for the crank pulley bolt or utilize an underdrive pulley or both.
- Extra long reach tool kit for the installation of underdrive or oversized pulleys and applications with recessed threads on the crankshaft
- Traditional type balancer pulley installers will not work in many of these applications
- Includes four high quality long-reach threaded adapters and a universal nut that enables technicians install these pulleys with ease
UPC: 047084387009
Shipping weight: 3.7lbs38700 Long Reach Harmonic Balancer Instructions
38700 Long Reach Harmonic Balancer Installer Flyer
38700 – Replacement Parts & Applications
Also available:
38500 – Master Harmonic Balancer & Pulley Installer
38710 – Ford® EcoBoost Long Reach Harmonic Balancer Installer
38800 – Harmonic Balancer InstallerQuick View -
Master Harmonic Balancer & Pulley Installer
$158.05Part No: 38500
Master Harmonic Balancer & Pulley Installer
$158.05Two of our best-selling harmonic balancer installation sets combined to create a true “Master Set”. A wide-ranging set applicable to nearly any domestic or foreign applications.
- Install harmonic balancers on many popular late model Ford®, GM®, Dodge®, and Chrysler® engines with recessed threads for the crankshaft bolt and/or traditional setups
- Can be used for the installing underdrive or oversized pulleys
- Features four high-quality, long-reach threaded adapters, twelve standard, threaded adapters, force nut, and pressure bearing(s) to install balancers and pulleys with ease
- Long reach installer utilizes a heavy-duty, friction-free nut and pressure bearing assembly
- Offers more applications than other sets on the market
- Comes in a blow-molded case
UPC: 047084385005
Shipping weight: 6.54lbs38500 Master Harmonic Balancer Instructions
38500 Master Harmonic Balancer Flyer
Also available:
38700 – Long Reach Harmonic Balancer and Pulley Installer
38710 – Ford® EcoBoost Long Reach Harmonic Balancer Installer
38800 – Harmonic Balancer InstallerQuick View -
Drain Plug Repair Kit
$105.49Part No: 38400CV
Drain Plug Repair Kit
$105.49The drain plug repair kit designed to repair aluminum oil pans with damaged drain plug threads size M12x1.75, commonly found in GM®, Ford® and Mazda®.
- Inserts allow for original drain plug to be used instead of aftermarket plug
- Works with drain plugs commonly found in but not limited to: GM®, Ford® and Mazda® aluminum Oil Pans. General Motors® vehicles 1999-2004 CK Engine ASM V8/LR4/4. 8V, LM7/5.3T, LQ4/6.0U
- REPAIRS: General Motors® vehicles 2003 – 2005 ST1 Engine ASM-4.3L V6/ LU3/4.3X
- Kit contains: Drill, counter bore, tap, driver guide, (5) 12mm length inserts
UPC: 047084384008
Shipping weight: 1.35lbsQuick View