Products
Showing 61–72 of 318 resultsSorted by price: low to high
-

Ford® Fuel Filter Wrench
$19.78Part No: 25200
Ford® Fuel Filter Wrench
$19.78This fuel filter wrench is designed to remove and install the fuel filters on Ford® 6.0L and 7.3L Power Stroke diesel engines as well as International/Navistar engines.
- Lightweight, low-profile design that allows mechanics to access those tough fuel filters in tight quarters
- Reversible six lug design provides the convenience of two sizes in one tool
- 3/8″ drive allows the wrench to be used with a variety of drive tools
- Other wrenches sometimes break off points of the lid due to pressure not being distributed by the wrench, but this tool spreads the force over six points, preventing damage.
UPC: 047084252000
Shipping weight: 1lbQuick View -

Twin Spin Drive Converter 1/4″ – 3/8″
$20.27Part No: 488
Twin Spin Drive Converter 1/4″ – 3/8″
$20.27- Can be used to use a 1/4″ drive socket on a 3/8″ ratchet or a 3/8″ drive socket on a 1/4″ ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
UPC: 047084004883
Shipping Weight: .45lbsAlso available:
489 – Twin Spin Drive Converter 3/8″ – 1/2″Quick View -

Drop and Drive Spring Loaded Bit Holder
$20.73Part No: 494
Drop and Drive Spring Loaded Bit Holder
$20.73Presenting the patented magnetic bit driver with a guide that retracts and extends on its own every time, unlike any driver on the market! For use anywhere, inside and out, from putting up drywall and cement board to hanging sheathing or installing decking. Reloads faster, drop the fastener in and drive it.
- Spring-loaded bit adapter that guides it drives
- Guide will not only retract but will also extend back
- Guide locks to easily interchange bits
- Internal magnet holds bits in place
- For use with power tools including impact drivers
- Accepts existing, common 1/4″ hex bits
- Limited lifetime warranty
UPC: 047084004944
Shipping Weight: .13lbs494 Drop and Drive Sales Sheet
Quick View -

Euro Stretch Belt Installation Tool
$20.85Part No: 735
Euro Stretch Belt Installation Tool
$20.85- Larger with different pin configuration to accommodate larger pulleys with different designs found on many European vehicles.
- Quickly and easily installs stretch belts.
- Will not damage stretch belts during installation.
- Stretch Belts are being used more often in new vehicles and this tool is necessary in most applications.
- Eliminates the belt tensioner.
- Installation can be difficult because if the belt is twisted it can be damaged. This tool prevents that potential damage.
- Patented
UPC: 047084007358
Shipping weight: .2lbsQuick View -

Toyota® Brake Spring Tool
$20.88Part No: 364
Toyota® Brake Spring Tool
$20.88The low-profile design of this tool, allows the user to put the tip of this tool through the access hole and engage the parking brake spring cup, turn and release the pin on a variety of Toyota® vehicles.
- Special tip is designed to engage the shoe hold down spring cup
- Lower profile brake spring tool with a longer reach
- 2000 and current Tacoma, Tundra, FJ Cruiser, 4Runner, Land Cruiser, and Camry
UPC: 047084003640
Shipping Weight: .25lbsQuick View -

Twin Spin Drive Converter 3/8″ – 1/2″
$21.19Part No: 489
Twin Spin Drive Converter 3/8″ – 1/2″
$21.19- Can be used to use a 3/8″ drive socket on a 1/2″ ratchet or a 1/2″ drive socket on a 3/8″ ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
UPC: 047084004890
Shipping Weight: .3lbs489 Twin Spin Drive Converter Flyer
Also available:
488 – Twin Spin Drive Converter 1/4″ – 3/8″Quick View -

Heavy Duty Circuit Tester
$21.22Part No: 70
Heavy Duty Circuit Tester
$21.22- Tests 6-, 12-, 24- volt AC or DC systems for open grounded or short circuits.
- 60″ 16-gauge wire with heavy-duty ground clip
- Two replacement indicator bulbs: Part #67-01
UPC: 047084000700
Shipping Weight: .45lbsAlso available:
78 LCD Test Light
80 Logic Light Circuit TesterQuick View -

3 PC Drive Adapters Set
$21.47Part No: 487
3 PC Drive Adapters Set
$21.47- Set of drive adapters that step
- Available in a set or individually
- Part 487-1: 1/4″F x 3/8”M
- Part 487-2: 3/8”F x 1/2″M
- Part 487-3: 1/2″F x 3/4″M
UPC: 047084004876
Shipping Weight: .64lbsQuick View -

Tube Bend Mirror Adapters
$22.22Part No: 75902
Tube Bend Mirror Adapters
$22.22These adapters allow users to easily create matching bends and angles on two lines at the same time or use an existing tube to guide the creation of a replacement line. Remove the guesswork and do it right the first time.
- Adapters used to mirror or match the brake line runs for duplication of bends.
- Allows users to precisely match proper angles and points on run to make bends.
- For steel, copper, and plastic-coated brake lines with diameters of 3/16” (4.75mm) or ¼” (6.3mm)
UPC: 047084759028
Shipping Weight: .09lbQuick View -

Heavy Duty Pinch Off Pliers
$22.23Part No: 16500
Heavy Duty Pinch Off Pliers
$22.23- Eliminates the need to drain systems when servicing cooling systems.
- Pliers squeeze heater or radiator hoses shut and jaws swivel for parallel clamping.
- Automatic locking ratchet.
- May also be used to pinch off vacuum lines and fuel lines.
- For use on wire reinforced radiator hoses.
UPC: 047084165003
Shipping weight: 1.15lbsQuick View -

Disc Brake & Small Engine Hone
$22.52Part No: 357
Disc Brake & Small Engine Hone
$22.52- Adjustable tension flex shaft cylinder hone covers 1-1/4″ to 3-1/2″ (32mm – 89mm) diameter cylinders.
- Use on most compact cars, as well as, cycles, lawnmowers, and outboard motors.
- Includes three 2″ (51mm) Medium grit stones, part 357-1.
- Replacement Stones:
- 357-1 Replacement Stones 2″ (51mm) Medium Grit, 220-240 Grit. Set of 3.
- 357-3 Replacement Stones 2″ (51mm) Fine Grit, 400 Grit. Set of 3.
- To hone disc brake cylinders larger than 1-1/4″ (32mm): 358-1 Replacement Stones 3/4″ (19mm) Fine Grit, 400 Grit. Set of 3.
UPC: 047084003572
Shipping Weight: .25lbsQuick View -

2-3/8″ LED Lighted Inspection Mirror
$22.58Part No: 32CV
2-3/8″ LED Lighted Inspection Mirror
$22.58View and thoroughly inspect dark, hard to reach areas with an integrated LED light and large, fully-articulated mirror and up to 37″ of extension.
- Head swivels nearly 360˚ to inspect hidden and hard-to-reach areas
- LED lighted head illuminates dark recesses with replaceable batteries
- Ball-joint connection is sturdy enough to hold the head at nearly any angle
- Closed the unit is 6-1/2″ and the stainless-steel handle extends to 37″
- Features an ergonomic, textured grip
- Batteries included (2-CR2016)
Applications:
Numerous applications in the automotive field, especially useful when you do not have access to a borescope.UPC: 047084000328
Shipping Weight: .75lbsQuick View



























