Products
Showing 85–96 of 317 resultsSorted by popularity
-
Inner Tie Rod Removal Tool
$24.43Part No: 946
Inner Tie Rod Removal Tool
$24.43The Inner Tie Rod Removal Tool, is essential when working with applications when inner tie rods have round ends, but can also be used for rounded with flats, hex end versions and great for inner tie rod ends with damaged surfaces.
- Turns smooth tie rods easily.
- Simply slide tool over the end and tighten collar to allow access with an extension.
- Can remove Inner tie rod without removing the outer tie rod
- No more bulky tool to store.
- Inexpensive and effective way to turn these smooth tie rod ends.
UPC: 047084009468
Shipping weight: .75lbQuick View -
6PT and 12PT Flex Oxygen Sensor Wrench
$38.46Part No: 844CV
6PT and 12PT Flex Oxygen Sensor Wrench
$38.46The combination 12 & 6-Point Flexible Oxygen Sensor Wrench Model is designed for use with most oxygen sensors. The double-sided design allows the technician easier access with the 12-point socket and more torque with 6-point for rusted or stubborn sensors.
- Gives technicians access to remove sensors in difficult areas.
- Offset, low-profile design allows more room and leverage in confined areas
- Incorporates a harness pass-thru in socket
UPC: 047084008447
Shipping weight: .95lb844 Oxygen Sensor Wrench Flyer
Also available:
843 – 6PT Oxygen Sensor WrenchQuick View -
Exhaust Tail Pipe Cutter
$53.85Part No: 764
Exhaust Tail Pipe Cutter
$53.85- Comprised of thirteen, large diameter (19mm) cutting wheels that cut deep into exhaust pipes.
- Will not leave burrs.
- Ideal for heavier-walled European-type exhaust pipes.
- Cuts pipe from 3/4″ to 3-1/4″ (19mm – 83mm) in diameter.
- Only 1/4″ turn needed to cut.
- Works well in hard to reach places.
UPC: 047084007648
Shipping weight: 1.2lbsQuick View -
Subaru® Stretch Belt Installer
$24.90Part No: 737
Subaru® Stretch Belt Installer
$24.90- All 2008 to current models of Subaru® Impreza, Outback, and Forrester feature a stretch belt.
- When replacing these belts due to access issues traditional tools and even current stretch belt tools will not work.
- Only tool on the market for this job
UPC: 047084007372
Shipping weight: .15lbQuick View -
Disc Brake & Caliper Hone
$15.96Part No: 358
Disc Brake & Caliper Hone
$15.96- Equipped with special size Fine Grit Stones to hone disc brake calipers, providing that the diameter of the bore is not increased over .002″ (5mm).
- Adjustable tension capacity 3/4″ – 2-1/2″ (19mm-64mm)
- Includes three 3/4″ (19mm) Fine Grit Stones
- Replacement Stones:
- 358-1 Replacement Stones 3/4″ (19mm) Fine Grit, 400 Grit. Set of 3.
UPC: 047084003589
Shipping Weight: .2lbsQuick View -
SAE Double Flaring Tool
$60.44Part No: 163
SAE Double Flaring Tool
$60.44This 45 degree double flaring tool set is designed to withstand the high pressure necessary to double flare soft steel tubing, as well as single flare soft copper, aluminum, and brass tubing.
- Includes: Five (5) double flare adapters, drop-forged compressor yoke, and bar assembly
- Size capacity: 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″
UPC: 047084001639
Shipping Weight: 2.65lbs163 SAE Double Flaring Tool Kit Breakdown
163 – Double Flaring Tool Instructions
Also available:
153 Metric Double Flaring ToolQuick View -
Antenna & Radio Socket Set
$78.75Part No: 142
Antenna & Radio Socket Set
$78.75- Eleven-piece kit in molded case.
- Universal antenna wrench.
- Ford radio removal tool.
- Deep sockets to remove and install the tamper-proof radio nuts from many GM, Chrysler, and other aftermarket radios.
- Antenna nut sockets that cover most import and domestic antenna nuts.
UPC: 047084001424
Shipping weight: 1.7lbsQuick View -
Master Finger Bit Driver Set
$33.57Part No: 100
Master Finger Bit Driver Set
$33.57This diamond knurled master finger driver set is ideal for getting into tight areas due to the slender design. Includes 6 sockets adapters and 1 finger bit driver.
- Includes some of the most popular finger bit drivers available.
- Part #102: 1/4″ female square to 3/8″ male square
- Part #131: 1/4″ female square to 1/4″ male square
- Part #104: 3/8″ female square to 3/8″ male square
- Part #103: 3/8″ female square to 1/4″ male square
- Part #132: 1/4″ female hex to 1/4″ male square
- Part #133: 1/4″ female hex to 3/8″ male square
- Part #90600: 1/4″ female square to 1/4″ female hex
- Low profile for access to tight areas.
- Knurled bodies for sure grip.
UPC: 047084001004
Shipping Weight: .75lbsQuick View - Includes some of the most popular finger bit drivers available.
-
Heavy Duty Circuit Tester
$21.22Part No: 70
Heavy Duty Circuit Tester
$21.22- Tests 6-, 12-, 24- volt AC or DC systems for open grounded or short circuits.
- 60″ 16-gauge wire with heavy-duty ground clip
- Two replacement indicator bulbs: Part #67-01
UPC: 047084000700
Shipping Weight: .45lbsAlso available:
78 LCD Test Light
80 Logic Light Circuit TesterQuick View -
Amp Alert
$51.53Part No: 69
Amp Alert
$51.53- Instant Parasitic Drain Finder
- Tool used to detect parasitic Drain without removing a fuse from the fuse box.
- Simply touch probes to the top of the fuse and tool gives off a distinct audible tone when parasitic drain current is detected.
- A huge time saver for the technician. Cuts troubleshooting time by up to 90%.
- Avoid blown multi-meter fuses.
- Resolution down to 5 milliamps.
- 1 year warranty
UPC: 047084000694
Shipping Weight: .25lbQuick View -
High Energy Ignition Tester
$11.46Part No: 64
High Energy Ignition Tester
$11.46- Safely checks for spark on any ignition system or engine with 1 to 12 cylinders.
- Simply attach spark plug wire to tester and clip tester to engine. Crank the engine and check for the presence of spark.
- Sealed chamber reduces risk of fire around high pressure fuel injection systems or marine use.
UPC: 047084000649
Shipping Weight: .1lbsQuick View -
Multi-Functional Push Pin & Clip Pliers
$30.76Part No: 68700CV
Multi-Functional Push Pin & Clip Pliers
$30.76The 68700, is designed with an angled head to easily remove multiple types of push pins and trim clips found on most vehicles. Equipped with a cutting function and hole design to grip plastic fasteners without cutting head off. Ergonomic dip handles for a comfortable grip and an added spring to prevent hand fatigue during long periods of use.
- Angled head equipped with a diagonal cutting function and hole design to grip plastic fasteners
- Easily removes multiple types of push pins and trim clips found on most vehicles
- Removes nails and rivet puller
- Ergonomic dip handles for a comfortable grip
- Added spring prevents hand fatigue
UPC: 047084687000
Shipping weight: .5lbsAvailable on backorder
Quick View