Products
Showing 13–24 of 318 resultsSorted by popularity
-
In-Line Dowel Pin Puller Master Set
$250.00Part No: 95400
In-Line Dowel Pin Puller Master Set
$250.00No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel. Master Set includes both SAE and Metric collets.
- A simple and effective method for removing dowel pins
- Can be used with an air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow-molded case
- Patent pending
Contains:
SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mmUPC: 047084954003
Shipping Weight: 4.61lbs95200, In-Line Dowel Pin Puller Set, SAE Only
95300, In-Line Dowel Pin Puller Metric, Metric OnlyQuick View -
Body Dent & Seal Puller
$40.78Part No: 49500
Body Dent & Seal Puller
$40.78Tool used to pull dented sheet metal back into position.
- Equipped with a 2-1/2 lb slide hammer
- 13″ long shaft enables high pulling force
UPC: 047084495001
Shipping weight: 3lbsAvailable on backorder
Quick View -
Magnetic Bit Holder
$5.27Part No: 119
Magnetic Bit Holder
$5.27- 28 bit holder- holds 1/4” and 5/16” bits
- Magnetic backing attaches to toolbox or other surface for convenience.
- Securely holds bits, bit sizes easily identified.
UPC: 047084001196
Quick View -
Dual View WiFi Borescope
$175.00Part No: 86
Dual View WiFi Borescope
$175.00Most borescopes use mirrors to achieve alternate viewing angles. Our newest borescope utilizes dual hi-res cameras, bright LED illumination, and up to three times zoom to give users superior viewing and video capture capabilities.
- Hi-Res 1080p cameras provide front and side video and image capture
- The camera, lens, and cable are IP 67 rated water resistance
- Ultra-bright lighting provided by seven total LEDs
- Flexible semi rigid 58″ cable
- Unit transmits and connects to devices via an independent Wi-Fi signal up to 30ft away, giving it the freedom to be used everywhere
- Replacement attachment kit: 86-1
- 1 year warranty
UPC: 047084000861
Shipping Weight: .4lbs86 Dual View WiFi Borescope Cal-Van Manual
86 Dual View WiFi Borescope Flyer
Also available:
85 Pistol Grip WiFi Borescope
84 WiFi BorescopeAvailable on backorder
Quick View -
Stud Removal and Installation Kit- SAE
$42.00Part No: 95600CV
Stud Removal and Installation Kit- SAE
$42.00Using make-shift methods to remove and install studs is often ineffective and has a higher possibility to causing damage to the studs, meaning more work. This set is specifically designed to make it easier to do it the right way every time.
SAE version includes five installers and five removers in multiple sizes.
- Specifically designed to make stud removal and installation easier
- Eliminates the potential for damage to studs other methods often cause
- Contains common thread sizes
SAE thread sizes:5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14
UPC: 047084956007
Shipping Weight: 2lbsQuick View -
4″ Replacement Stones for Part 360, Coarse
$13.52Part No: 361-02
4″ Replacement Stones for Part 360, Coarse
$13.52Replacement stones for part 360
- 4″
- Coarse grit, 100 grit
- Set of 3
- Cotter pins included
- Hone not included
UPC: 047084361023
Shipping Weight: .25lbsQuick View -
Subaru® Hex Bit
$15.28Part No: 7541
Subaru® Hex Bit
$15.28Designed to securely fit the 10MM camshaft sprocket bolt (P.N.13199AA000) without stripping the bolt and or shearing bolt head off. 1″ sized socket with 6PT. It is recommended to apply to hex bit for loosening/tightening hex bolt. This bolt is used on a wide variety of Subaru STI engines.
- Specifically designed to fit Subaru® crankshaft sprocket bolt
- Designed for use with a 1″ socket or wrench
- Impact rated
Applications:
- 02-07 Subaru® Impreza WRX STI (exhaust cams only)
- 02+ Subaru® Impreza WRX (06+ WRX exhaust cams only)
- 04-08 Subaru® Forester XT (exhaust cams only)
- 05-10 Subaru® Legacy GT (exhaust cams only)
- 05-10 Subaru® Outback XT (exhaust cams only)
- 05-06 Saab® 9-2X
- 04-06 Subaru® Baja
- 04+ Subaru® Impreza WRX STI (intake cams only) *Includes JDM Ver.9 STI
- 06-14 Subaru® Impreza WRX (intake cams only)
- 04-11 Subaru® Forester XT (intake cams only)
- 05-10 Subaru® Legacy GT (intake cams only)
- 05-10 Subaru® Outback XT (intake cams only)
- 04-06 Subaru® Baja Turbo (intake cams only)
- 06 Saab® 9-2X Aero (intake cams only)
UPC: 047084075418
Shipping weight: .25lbsQuick View -
In-Line Dowel Pin Puller Set, SAE
$160.00Part No: 95200
In-Line Dowel Pin Puller Set, SAE
$160.00No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use outer sleeve and nut to extract the dowel.
- Simple and effective method for removing dowel pins
- Can be used with air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow molded case
- Patent pending
SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
UPC: 047084952009
Shipping Weight: 3.65lbs95300, In-Line Dowel Pin Puller Metric, Metric
95400, In-Line Dowel Pin Puller Master Set95200 Dowel Pin Puller Instructions
Quick View -
Ford® Triton Spark Plug Extractor Master Set
$110.65Part No: 39500
Ford® Triton Spark Plug Extractor Master Set
$110.65In some cases the porcelain will break off in the sleeve and will need to be extracted in order for the 39500 to function effectively. This Tool is used to extract the broken porcelain or seized sleeves from broken spark plugs in 2003 to current Ford® Triton Engines. Unlike other tools that tell you to push the porcelain through the sleeve (Ford® says specifically not to do this), this tool adheres to the porcelain using a special perma-bond and then allows a user to extract the broken porcelain from the sleeve. In combination with the porcelain extractor, this combo tool also works to extract frozen and broken off spark plug sleeves for the same model Ford® Triton Engines. Specially machined guide works with extra long tap and extractor to make sure the job is done easily and quickly.
UPC: 047084003950
Shipping weight: 1.5lbsQuick View -
2 Valve Replacement Insert
$35.85Part No: 389-100
2 Valve Replacement Insert
$35.85Replacement insert for the 2 Valve Ford® Triton Engine kit, part 38900.
- 14mm x 1.25
- 3/4″-16 OD
- Works with Ford® Triton Motors ’96 – ’03
- Sold individually
- Steel alloy with black oxide finish
UPC: 047084389102
Shipping Weight: .05lbsQuick View -
Subaru Crank Pulley Tool
$36.00Part No: 198
Subaru Crank Pulley Tool
$36.00The use of this tool eliminates the need to remove the radiator to make space for an impact wrench. Time is saved by not having to refill and bleed the air out of the cooling system when changing a timing belt.
- Tool designed to hold harmonic balancer for removal and installation.
- This tool combines the individual tools available into one tool, while also increasing applications.
- Applications: 1.8L, 2.2L, 2.2L Turbo, and 2.5L Subaru motors
UPC: 047084001981
Shipping Weight: 2.1lbsQuick View -
Magnetic Pick-Up Tool and LED Pen Light
$12.54Part No: 33CV
Magnetic Pick-Up Tool and LED Pen Light
$12.54Use the LED flashlight to view dark and dim recesses. Use the extendable magnet end with lifting power up to 5lbs to retrieve items from hard-to-reach areas. Has a convenient pocket clip to keep with you for whenever you need it.
- Magnet on one end to retrieve items from hard-to-reach areas
- Durable aluminum body with a LED flashlight
- Closed the unit is 7-1/4″ and the telescoping stainless-steel inner tube extends to 27-1/4″
- Shielded magnet with 5 lbs. of lifting power
- Convenient pocket clip
- Batteries included (4-LR41)
Applications:
Numerous applications in the automotive field, a great daily companionUPC: 047084000335
Shipping Weight: .25lbsQuick View
