Products
Showing 181–192 of 318 resultsSorted by popularity
-
7 oz Multi-Purpose Fluid Extractor Kit
$34.50Part No: 85610CV
7 oz Multi-Purpose Fluid Extractor Kit
$34.50The 7 oz Multi-purpose fluid extractor is made from heavy-duty, chemical resistant, polypropylene plastic. Ideal to extract oil, brake, steering fluids and anti-freeze. Includes two quick connect extension tubes for hard to reach areas and deep fluid reservoir found on all vehicles types.
- Will hold 7 oz.
- Dual measurement scale on tube determines fluid levels easily
- Safe for brake, steering, and other fluids, including anti-freeze
- Includes two quick connect extension tubes for hard to reach areas and deep fluid reservoirs
- Syringes are washable
UPC: 047084856109
Shipping Weight: .65lbs85610 7 oz Multi-Purpose Fluid Extractor Flyer
Also available:
85620 – 17 oz Multi-Purpose Fluid Extractor Kit
85630 – 1.5 Liter Multi-Purpose Fluid Extractor KitQuick View -
Brake Line Bending Tool
$23.50Part No: 76110CV
Brake Line Bending Tool
$23.50The 76110, Brake line bending tool, is designed to align, bend and adjust brake lines up to 3/6″/4.75MM in diameter. Comes with two 90 degree bending width options and a 6MM female hex slot for a secure hold while bending brake lines. Ergonomic design is suitable for one-handed operation.
- Design to bend brake lines with a 3/16″ – 4.75mm maximum diameter
- Fitted with a 15/64″ – 6mm hex slot for holding and bending brake lines
- Two 90 degree bending width options
- Coated with an anti-corrosion electrophoretic black paint
- Ergonomic design is suitable for one handed operation
- Compact features allows user to complete brake line bends in tight fitting applications
UPC: 047084761106
Shipping Weight: .35lbsAlso available:
75902 – Tube Bend Mirror AdaptersQuick View -
Brake Anchor Pin Press
$275.99Part No: 70100CV
Brake Anchor Pin Press
$275.99The 70100, Brake Anchor Pin Press, is designed to safely and easily remove brake anchor pins and bushings on 16-1/2″ S-Cam trailers and Tractor “Q” brake systems. Eliminates dangerous alternative tool methods in needing to hammer, chisel or use a gas torch for pin and bushing removal. Heavy duty C-Frame is made from high grade steel with a 10-ton capacity.
- Removes brake anchor pins and bushings on 16-1/2″ S-Cam trailers and Tractor Q brake systems
- No need to remove hub or dust shield
- 10 Ton capacity C-Frame
- Easily removes seized anchor pins
- Design for use with 1/2″ Impact Wrench
UPC: 047084701003
Shipping weight: 7.15lbsQuick View -
25 PC Multi Spline Screw Extractor Set
$74.99Part No: 44200CV
25 PC Multi Spline Screw Extractor Set
$74.99- Ideal set to remove broken screws, bolts, nuts, fittings, threaded rods
- Chamfered bit ensures a smooth fit into damaged fasteners
- High-density spiral design to remove fasteners quickly
- Professional grade, hardened Chrome Molybdenum steel
- Can be used with power and hand tools
UPC: 047084442005
Shipping weight: 4.07lbsQuick View -
Hub Wheel Bearing Master Service Set
$499.00Part No: 94000CV
Hub Wheel Bearing Master Service Set
$499.00Remove and install wheel hub bearings in a breeze with this highly adjustable, universal master service set. Able to be used on the vehicle without the need of removing various steering and suspension components.
- Service front-wheel drive vehicles, including cars and light-duty trucks
- Each puller leg quickly and effortlessly adjusts for various fitments and has locking pins to hold the positioning
- Eliminates the need for post-repair alignments and replaces a shop press
- Use to remove brake drums and rotors
UPC: 047084940006
Shipping Weight: 44lbs94000 Hub Wheel Bearing Master Service Set Breakdown
94000 Hub Wheel Bearing Master Service Set User Manual with Application Chart
Quick View -
Magnetic Paper Towel Holder
$41.10Part No: 90944CV
Magnetic Paper Towel Holder
$41.10This pair of magnetic paper towel holders is perfect for mechanics and comes with heavy duty, non-marring rubber coated magnets that will not scratch any metal surface applied to. Easily holds a common sized roll of paper towel, roll of shop towels by any work area, with a 9.47lbs holding weight capacity. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.
• Heavy Duty non-marring rubber coated magnets
• Industrial Grade powder coating finish resist rust and corrosion
• Paper Towel holder will adjust any any length roll
• 9.47LBS Weight CapacityUPC: 047084909447
Shipping weight: 1.75lbsQuick View -
5 PC Magnetic Tool Box Tray Set
$124.50Part No: 90950CV
5 PC Magnetic Tool Box Tray Set
$124.50The 5 piece magnetic toolbox tray set, comes with heavy-duty, non-marring rubber coated magnets that will not scratch any metal surface applied to. The 6″ (Part #90941CV) and 12″ (Part #90942CV) magnetic shelf trays easily holds fasteners, small parts and tools by any work area. The Magnetic spray can tray (Part #90943CV) easily holds 3 spray cans and 7 various sized screwdrivers, while the pair of magnetic paper towel (Part #90944CV), easily holds a common sized roll of paper towel, roll of shop towels by any work area and the magnetic vinyl glove holding tray (Part #90945CV) helps keep glove boxes neat where you need them the most. Industrial grade powder coated finish will resist rust and corrosion from a work shop environment.
- Heavy-duty, non-marring rubber coated magnets
- Industrial Grade, powder coating finish resists rust and corrosion
- Paper Towel holder will adjust to any length roll
- 3 spray can holder tray with 7 various sized screwdriver holes
- Adjustable side springs to hold glove boxes in place
UPC: 047084909508
Shipping weight: 10lbs90950 5 PC Magnetic Tool Box Accessory Set Flyer
Available separately:
90941 – 6″ Magnetic Tool Box Shelf
90942 – 12″ Magnetic Tool Box Shelf
90943 – Magnetic Spray Can Holder
90944 – Magnetic Paper Towel Holder
90945 – Magnetic Glove Box HolderQuick View -
8 PC Air Blow Gun Set
$73.34Part No: 40500CV
8 PC Air Blow Gun Set
$73.34This 8 pc air blow gun kit comes with 7 different application interchangeable tips designed to blow off work areas, used to dry off surfaces and easily inflates pool toy and balloons.
- Ideal for cleaning debris from work area
- Use to dry off wet surfaces
- Easily inflate pool toys and balloons
- 1/4″ NPT Female Threaded Air Inlet
Specs:
- Air gun body working air pressure 160PSI
- Air gun body maximum air pressure 220PSI
- Air consumption at 160PSI without tip 15.0 CFM
- Working temp range -4 degrees to 185 degrees
UPC: 047084405000
Shipping weight: 1.05lbsQuick View -
Heavy-Duty Bearing Cup Installer
$165.00Part No: 20300CV
Heavy-Duty Bearing Cup Installer
$165.00Accurately install bearing cups in minutes into the Dana/Spicer SPL Life Series quick-disconnect u-joints. The press plate and specific adapters make proper installation easy every time while also reducing the risk of damage to the driveshaft, yokes, and joints.
- Three adapters to fit SPL 140, 170, 250 Series drivelines
- Use on quick disconnect universal joint only
- Safer alternative to makeshift methods
- Can be used with hand and air tools
- Great partner tool for Heavy Duty U-Joint Puller (Part No.199) and Heavy Duty Yoke Puller (Part No. 497)
- Applications:
- Dana®/Spicer® SPL 140, 170, and 250 Series U-joints found in class 6-8 commercial vehicles and equipment
UPC: 047084203002
Shipping weight: 12.5lbs20300CV Heavy Duty Bearing Cup Installer Instructions
Quick View -
Sale!
16 PC Master Wheel Locking Nut Key Set
Original price was: $119.99.$89.99Current price is: $89.99.Part No: 75510CV
16 PC Master Wheel Locking Nut Key Set
Original price was: $119.99.$89.99Current price is: $89.99.Locking lug nuts are a great deterrent of wheel theft, but for mechanics, they can quickly make an easy job more difficult. This set makes removing wheel locks simple. This set consists of 8 internally splined bits along with 8 hex and star bits.
- Designed for removing many OEM and aftermarket specific locking wheel lug nuts
- Reduces chances of damaging lug nuts or wheels
- Chrome-vanadium construction and rust-resistant, black oxide finish
- Contains eight inner-splined keys and eight outer-splined keys
- All organized in a blow-molded case
Inner-splined sizes:
5-spline Short 5/8″, 6-spline 41/64″, 6-spline 45/64″, 7-spline Medium 5/8″, 7-spline Short 11/16″,
7-spline Long 3/4″, 12-spline 11/16″, and 12-spline 13/16″Outer-splined sizes:
8-pt Star 7/16″, 8-pt Star Lug 5/8″, 9-pt Star Lugs 1/2″, 10-pt Star Lug 1/2″, Fluted Hex 12mm Outer,
Hex Lug 12mm, Hex Lug 15mm, and Hex Lug 9/16″UPC: 047084755105
Shipping Weight: 5.75lbsQuick View -
Ford® Harmonic Balancer Holder
$35.00Part No: 38110CV
Ford® Harmonic Balancer Holder
$35.00A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt-on popular Ford® engines, or it can be used to turn the engine when doing timing work. The studs of the tool go into the open spans of the harmonic balancer to apply force against them, while a 1/2″ drive ratchet or breaker bar is inserted into the knockout hole of the face plate for leverage. The open faceplate allows a socket to be applied to the retaining bolt of the balancer. While holding the balancer in place, the bolt can be loosened or tightened without the crankshaft turning with it. This tool can also be utilized to turn the engine when a procedure requires alignment of timing marks.
- Designed to fit multiple Ford® vehicles ranging from 1992 – 2016
- The adapter securely fits the crankshaft to keep it from rotating when loosening the pulley bolt
- The ½” drive knockout allows for the use of a ratchet or breaker bar
- Ideal for rotating the engine for timing-related jobs
- Will not warp balancer
- Heavy-duty construction
UPC: 047084381106
Shipping weight: 1.19lbsQuick View -
Adjustable Indexing Trim Clip Pliers
$55.00Part No: 54CV
Adjustable Indexing Trim Clip Pliers
$55.00The indexing push pin pliers are designed to remove multiple types of push pin fasteners. The head rotates from 0-90 degrees to access difficult to reach fasteners and tight areas. Low profile tips allows easy access to the thinnest fasteners. The tool allows one handed operation and double dipped grip handles provides additional comfort during use.
- Removes plastic anchors with center pins without damage to the pin or the anchor with one-handed operation
- Adjustable head design allows access to difficult or otherwise unreachable areas when trying to use other similar pliers
- Steel construction with a double-dipped textured, grip
UPC: 047084000540
Shipping Weight: .75lbsQuick View
