Products
Showing 169–180 of 318 resultsSorted by popularity
-
Harmonic Balancer Puller
$86.94Part No: 386
Harmonic Balancer Puller
$86.94Designed for removing damper pulleys in tight engine compartments, without removing the radiator. The kit contains the 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8″ square drive for ratchet use, and a 3/4″ hex for wrench or socket use.
- Applications:
- GM 2000 Generation III 4.8L, 5.3L, 5.7L, 6.0L and 8.1L V8s
- Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988
- Chevrolet trucks 2003 – later 4.2L, I6, 2004 – current 3.5L, I5 and 2005 – current 2.8L I4
- Chrysler engines 1990 – later, including 2.0L, 2.4L – 4s; plus 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s
- Ford 1995 – later V8 engines with 3 spoke pressed on damper
- Mitsubishi Eclipse 1995 – 1999 2.0L DOHC non-turbo
UPC: 047084003862
Shipping Weight: 2.9lbsQuick View - Applications:
-
Adjustable Brake Cylinder Hone
$15.74Part No: 362
Adjustable Brake Cylinder Hone
$15.74Finest “full range” hone on the market covering sizes from 3/4″ to 2-1/2″ (19mm-64mm).
- Knurled nut controls tension for honing, deglazing throughout full range.
- Hones clear to end in step-cut and blind end cylinders.
- Flexible shaft for easy use right on car.
- Includes set of three 1-1/8″ (29mm) Medium Grit Stones, 220-240, Grit. Replacement part: 363.
- Can also use replacement stones, 363-01 (fine grit) or 363-02 (coarse grit).
UPC: 047084003626
Shipping Weight: .2lbsQuick View -
Power Steering Pump Remover and Installer Kit
$73.77Part No: 195CV
Power Steering Pump Remover and Installer Kit
$73.77This kit has nearly everything you need to remove and install power steering pump pulleys in Chrysler, Ford, and GM vehicles with Saginaw, Thompson, and Ford C111 and C2 power steering pumps.
- Fits 1-1/8″, 1-1/4″, 1-5/16″, and 1-3/8″ pulley hub diameters including:
- 1988 – newer GM cars equipped with Quad 4 engines
- 1991 – 94 GM 3.1L V6
- 1991 – newer 3800 V6 engines
- 1994 – newer GM 3100 V6
- 1999 – newer GM 3400 V6
- 1992 – newer Ford Crown Victoria and Mercury Grand Marquis with 4.6 V8 engine
- 1997 – newer Ford truck with 4.2 & 4.6 V6, 5.4 V8, and 6.8 V10 engines
UPC: 047084001950
Shipping Weight: 2.09lbsQuick View - Fits 1-1/8″, 1-1/4″, 1-5/16″, and 1-3/8″ pulley hub diameters including:
-
Constant Tension Tube Cutter, 1/8″ – 1-1/8″
$45.00Part No: 158CV
Constant Tension Tube Cutter, 1/8″ – 1-1/8″
$45.00The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
- Cuts a range of tubing sizes from 1/8″ – 1-1/8″
- Spring loaded tube cutter
- Patented design
- Replaceable blade, part #157-600
UPC: 047084001585
Shipping Weight: .6lbs158 Constant Tension Tube Cutter Flyer
Also available:
157 Constant Tension Tube Cutter, 3/16″ – 7/8″
159 Mini-Mini Constant Tension Tube CutterQuick View -
Body Clip Pliers
$25.00Part No: 55CV
Body Clip Pliers
$25.00No need to buy 3 sets of trim clip pliers for different applications, this one does it all. These specially designed and patented pliers will remove any clip found on trim, bumpers, etc.
- Very popular with Paint and Body.
- Steel levers enclosed in PMS plastic prevents scratches
- Tips have a special angle and size that make them the most versatile tool in the clip removal category
- These clips are found on almost every vehicle inside and out.
- Patent pending.
UPC: 047084000557
Shipping Weight: .3lbsAlso available:
56 Recessed Body Clip PliersQuick View -
2-1/4″ Round Telescoping Mirror
$9.46Part No: 25CV
2-1/4″ Round Telescoping Mirror
$9.46View and thoroughly inspect hard to reach areas with a large, fully-articulated mirror and more than 36” of extension.
- 2-1/4″ (57mm) round mirror with metal backing
- Extends to 36-3/8″, giving access to the hardest to view areas
- Double-ball joint allows mirror to swivel freely 360 degrees, yet hold a desired position
- 7″ insulated handle extends to 12″
- Cushioned and textured handles provide grip
- 17″ overall length
UPC: 047084000250
Shipping Weight: .15lbsQuick View -
Fuel Pump Locking Ring Tool
$43.95Part No: 25310CV
Fuel Pump Locking Ring Tool
$43.95The Fuel Pump Lock Ring Tool is designed to quickly remove and install fuel tank lock rings when servicing fuel pump or fuel sending unit replacement. Universal design fits to any 7.25″ O.D. metal or plastic lock rings found on Ford®, Chrysler® and GM® vehicles.
- Unique design fits on multiple makes and models of fuel tank lock rings
- Easily removes and installs fuel tank lock rings when servicing fuel pump or fuel sending unit
- Allow for greater clearance on the top of fuel sending units than other versions
- Easily attach 1/2″ drive ratchet or breaker bar
- Professional grade steel with black oxide finish to resist rust and corrosion
- Applications (not limited) :
- Dodge® Ram 1500 2500 3500 4500
- Dodge® Charger Dodge Challenger SXT
- Chevy® Silverado Malibu, Maxx, Colorado, Avalanche, Trailblazer, Camaro SS
- 2005 Mercury® Montego
- 2005-2006 Pontiac® Bonneville & G6
- 2006 Chrysler® 300c
- 2011 Kia® Sorento
- Jeep® Wrangler, TJ Jeep, Compass
- Ford® Explorer, Ford F-150, Ford Ranger
- Mercury® Mariner
UPC: 047084253106
Shipping Weight: 1.15lbsAvailable on backorder
Quick View -
Outer Tie Rod Remover
$47.74Part No: 188
Outer Tie Rod Remover
$47.74The Outer Tie Rod Tool comes with specially designed jaws and cup style end on forcing screw that removes the chance of damage caused by other less effective methods like hammering.
- Our most versatile puller can be used on a wide array of tie rod ends and ball joints.
- Working range of 4″ of spread and a reach of 3-5/8″
- Replacement center screw: 188-1
- Replacement swivel: 188-2
UPC: 047084001882
Shipping Weight: 2.5lbsQuick View -
10 Ton Push Puller
$139.95Part No: 18100CV
10 Ton Push Puller
$139.95The 10-Ton Push Puller is designed to push or pull depending on how the puller is set up. Ideally to be used with various pulling attachments when needing to remove press fitted parts such as bearings, gears and other components.
- Designed to remove and install press to fit parts, gears, bearing and shafts
- Can be used with bearing pullers and pulley pulling attachments
- 10-Ton Capacity
- Cross Bar spread range 2-1/8″-7-1/4″
- Maximum reach of 8-1/4″
- Heavy Duty Truck Applications
UPC: 047084181003
Shipping weight: 7.25lbsQuick View -
Sheppard M110 Pitman Arm Puller
$199.99Part No: 18630CV
Sheppard M110 Pitman Arm Puller
$199.99- Replaces less effective and often destructive methods to remove pitman arms
- Constructed of high-strength materials for increased pulling power
- Rated for usage with up to a 3/4″ drive impact for faster removal
- Applicable to highway transportation vehicles, RVs, buses, and equipment
UPC: 047084186305
Shipping weight: 11lbs18630 Sheppard M110 Pitman Arm Puller Flyer
Also available:
18620 Sheppard M100 Pitman Arm Puller
18640 Intermediate Pitman Arm PullerQuick View -
4 PC Oil Filter Wrench Set with Holder
$45.00Part No: 99000CV
4 PC Oil Filter Wrench Set with Holder
$45.00- Features a swivel handle that allows user to get to filters in hard to reach areas
- Wide dimpled band securely grips filters without crushing
- Ergonomic cushioned rubber grip
- Heavy-duty magnetic base holder for secure metal surface placement
- Locknut allows user to tighten or loosen swivel handle feature
- Sizes included:
- Part #99001: 2-1/4″-2-7/8″ (57-73MM)
- Part #99002: 2-9/16″-3-1/4″ (65-83MM)
- Part #99003: 2-61/64″-3-3/4″ (75-95MM)
- Part #99004: 3-5/8″-4-3/8″ (92-111MM)
UPC: 047084990001
Shipping weight: 4.25lbs99000 4 PC Oil Filter Wrench Set Flyer
Also available:
99100 – 6 PC Oil Filter Wrench Set with HolderQuick View -
4 PC Half Size Metric Flip Socket Set
$51.50Part No: 96120CV
4 PC Half Size Metric Flip Socket Set
$51.50The half sized metric socket set is designed to remove inflated, damaged or warped chrome capped style lug nuts. Unique 6PT double-sided flip socket design with deep wells to provide increased engagement on lug nuts. 1/2″ Dr. 3″ extension bar included. All packed in a plastic blow molded carrying case.
- Half Sized metric sockets are designed to remove inflated, damaged chrome capped style lug nuts
- Chrome cap lug nuts, found on most Domestic and Foreign vehicles
- Double-sided Flip Socket design
- 1/2″ DR. 3″ Extension bar included
- Made from Chrome molybdenum steel provides maximum strength and durability
- Can be used with an impact rated power tool
- Black Oxide finish resists rust and corrosion
UPC: 047084961209
Shipping Weight: 1.95lbs96120 4 PC Metric Half-Size Flip Socket Set Flyer
Also available:
96100 – 5 PC Lug & Lock Flip Socket Set
96110 – 6 PC Double Flip Socket SetQuick View