CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Products

  • Body Dent & Seal Puller

    Body Dent & Seal Puller

    $40.78

    Part No: 49500

    Body Dent & Seal Puller

    $40.78

    Tool used to pull dented sheet metal back into position.

    • Equipped with a 2-1/2 lb slide hammer
    • 13″ long shaft enables high pulling force

    UPC: 047084495001
    Shipping weight: 3lbs

    Available on backorder

    Quick View
  • Master Ratchet Accessory Set

    Master Ratchet Accessory Set

    $60.00

    Part No: 48100

    Master Ratchet Accessory Set

    $60.00

    All the items you need to get to tight access areas, around corners, and adapt sockets to step up and down.

    • Set Includes many popular items available from Cal Van.
    • Set Includes:
      • 488: Twin Spin Drive Converter 1/4″ – 3/8″
      • 499: Twin Spin Drive Converter 3/8″ – 1/2″
      • 482: 90 Degree Angle Dr. 1/4″
      • 483: 90 Degree Angle Dr. 3/8″
      • 90600: Finger Nut Driver with bit

    UPC: 047084481004
    Shipping weight: 1.4lbs

    Quick View
  • Ford® Triton Spark Plug Thread Repair Kit, 3 Valve

    Ford® Triton Spark Plug Thread Repair Kit, 3 Valve

    $175.00

    Part No: 39300

    Ford® Triton Spark Plug Thread Repair Kit, 3 Valve

    $175.00

    The spark plug tends to break off in the cylinder head during maintenance. If this problem is not repaired properly it can result in damaged or unusable spark plug threads and in extreme cases the possibility of a spark plug blowout. Applicable in three-valve 5.4L and 6.8L gasoline engines built before 10/9/07 and three-valve 4.6L engines built before 11/30/07 found in many 2004–2008 Ford®, Lincoln®, and Mercury® vehicles. Repair those damaged threads or blowouts in 30 minutes or less per cylinder!

    • Provides an effective method to thoroughly extract broken porcelain and other possible debris that occurs when removing spark plugs on these Ford® engines, preventing damage or a failed repair
    • This kit will allow the user, with simple step-by-step instructions, to repair those damaged threads in 30 minutes or less per cylinder
    • Saves time and money
    • Works with Ford® Triton Motors ’04 to ’08
    • Works with 4.6L, 5.4L, and 6.8L engines
    • 16mm x 1.5 insert
    • 3/4″ – 16 OD
    • 393-100 Replacement inserts, 3 Valve Replacement Insert

    UPC: 047084393000
    Shipping Weight: 1.38lbs

    39300 – Three Valve Ford Triton Insert Kit Instructions

     

    Quick View
  • Ford® Triton Spark Plug Extractor Kit

    Ford® Triton Spark Plug Extractor Kit

    $60.00

    Part No: 39100

    Ford® Triton Spark Plug Extractor Kit

    $60.00
    • This item works to extract frozen and broken off spark plug sleeves in 2004 to present Ford® Triton Engines.
    • Specially machined guide works with extra long tap and extractor to make sure the job is done right.
    • This is a heavily requested application that will only get more popular

    UPC: 047084391006
    Shipping weight: 1.7lbs

    39100 – Instructions

    Quick View
  • Ford® Triton Spark Plug Thread Repair Kit, 2 Valve

    Ford® Triton Spark Plug Thread Repair Kit, 2 Valve

    $265.00

    Part No: 38900

    Ford® Triton Spark Plug Thread Repair Kit, 2 Valve

    $265.00

    Designed to aid in repairing Ford® Triton engines modular cylinders heads (1996-2003). Average repair time as short as 25 minutes.

    • A quality foolproof repair system that is cost-effective and fast
    • High-quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer
    • Works with Ford® Triton Motors ’96 to ’03
    • Works with 4.6L, 5.4L, and 6.8L engines
    • 14mm x 1.25 insert
    • 3/4″ – 16 OD
    • 389-100 Replacement inserts, 2 Valve Replacement Insert

    UPC: 047084389003
    Shipping Weight: 3.03lbs

    38900CV – Ford Triton Insert Installer Instructions

    38900 – Ford Triton Spark Plug Thread Repair Kit (Replacement Parts)

    Quick View
  • Harmonic Balancer Installer

    Harmonic Balancer Installer

    $70.00

    Part No: 38800

    Harmonic Balancer Installer

    $70.00
    • A must to properly install harmonic balancers or drive pulleys that are pressed on one or two groove pulleys on the crankshaft.
    • Use with Cal Van 189 Harmonic Balancer Puller – Remover

    UPC: 047084388006
    Shipping weight: 3.55lbs

    Quick View
  • Long Reach Harmonic Balancer and Pulley Installer

    Long Reach Harmonic Balancer and Pulley Installer

    $75.00

    Part No: 38700

    Long Reach Harmonic Balancer and Pulley Installer

    $75.00

    The Long Reach Balancer – Pulley Installer is a kit for installing harmonic balancer pulleys on many popular late model Ford®, GM®, Dodge®, and Chrysler® vehicles with V6 and V8 engines that have recessed threads for the crank pulley bolt or utilize an underdrive pulley or both.

    • Extra long reach tool kit for the installation of underdrive or oversized pulleys and applications with recessed threads on the crankshaft
    • Traditional type balancer pulley installers will not work in many of these applications
    • Includes four high quality long-reach threaded adapters and a universal nut that enables technicians install these pulleys with ease

    UPC: 047084387009
    Shipping weight: 3.7lbs

    38700 – Replacement Parts & Applications

    Quick View
  • Master Harmonic Balancer & Pulley Installer

    Master Harmonic Balancer & Pulley Installer

    $143.83

    Part No: 38500

    Master Harmonic Balancer & Pulley Installer

    $143.83

    Two of our best-selling harmonic balancer installation sets combined to create a true “Master Set”. A wide-ranging set applicable to nearly any domestic or foreign applications.

    • Install harmonic balancers on many popular late model Ford®, GM®, Dodge®, and Chrysler® engines with recessed threads for the crankshaft bolt and/or traditional setups
    • Can be used for the installing underdrive or oversized pulleys
    • Features four high-quality, long-reach threaded adapters, twelve standard, threaded adapters, force nut, and pressure bearing(s) to install balancers and pulleys with ease
    • Long reach installer utilizes a heavy-duty, friction-free nut and pressure bearing assembly
    • Offers more applications than other sets on the market
    • Comes in a blow-molded case

    UPC: 047084385005
    Shipping weight: 6.54lbs

    38500 Instructions

     

    Quick View
  • Drain Plug Repair Kit

    Drain Plug Repair Kit

    $96.00

    Part No: 38400CV

    Drain Plug Repair Kit

    $96.00
    • Kit designed to repair aluminum oil pans with damaged drain plug threads size M12x1.75 commonly found in GM®, Ford® and Mazda®.
    • Inserts allow for original drain plug to be used instead of aftermarket plug
    • Works with drain plugs commonly found in but not limited to: GM®, Ford® and Mazda® aluminum Oil Pans. General Motors® vehicles 1999-2004 CK Engine ASM V8/LR4/4. 8V, LM7/5.3T, LQ4/6.0U
    • REPAIRS: General Motors® vehicles 2003 – 2005 ST1 Engine ASM-4.3L V6/ LU3/4.3X
    • Kit contains: Drill, counter bore, tap, driver guide, (5) 12mm length inserts

    UPC: 047084384008
    Shipping weight: 1.35lbs

    38400 Instructions

    38400 – Drain Plug Repair Kit Replacement Parts

    Quick View
  • Ford® & Mazda® Engine Valve Timing Kit

    Ford® & Mazda® Engine Valve Timing Kit

    $48.37

    Part No: 38300

    Ford® & Mazda® Engine Valve Timing Kit

    $48.37

    This easy alignment tool takes place of pins needed in similar tools. Pins can be hard to access and add time to job in cases where other components are needed. This also eliminates the user error with pins that can lead to pins being bent and stuck.

    • For servicing the timing belt chains, head gaskets, or other valve train repairs on Ford®, Mercury®, and Mazda vehicles
    • Applications: 2.0L DOHC Zetec engines found in 1994-2003 Ford® and Mercury® vehicles and 2004-2012 2.5L DOHC, 2.3L DOHC 4V, and 2.0L DOHC engines that are found in Ford®, Mercury®, and Mazda® vehicles
    • Easy alignment tool is screwed into sparkplug hole and turned by wrench to align cams.
    • Tool positions number 1 cylinder to top dead center by holding number 2 or 3 cylinder to bottom dead center

    UPC: 047084383001
    Shipping weight: 1.45lbs

    38300 CAMSHAFT ALIGNMENT TOOL INSTRUCTIONS

    Quick View
  • 2-In-1 S-Cam Brake Tool

    2-In-1 S-Cam Brake Tool

    $28.00

    Part No: 36700CV

    2-In-1 S-Cam Brake Tool

    $28.00

    The Cal-Van Tools 2-in-1 S-Cam Brake Tool offers technicians a more efficient method for changing brake shoes on an S-Cam drum brake assembly. The tool is comprised of a steel shaft with a U-shaped fork on one end to stretch the retaining spring so that both halves of the brake shoes are held together which enables the user to hook up the pin. An S-shaped device on the opposite end enables the user to position the brake shoes in a way that allows leverage for installation of the rollers. The hooked end pulls the brake shoes apart so that the rollers can be installed faster and more safely.

    • Faster for changing brake shoes on S-cam drum brake assembly
    • Steel shaft

    UPC: 047084367001
    Shipping weight: 1.1lbs

    Quick View
  • 33000

    4-in-1 Multi-Hone Set

    $37.49

    Part No: 33000

    33000

    4-in-1 Multi-Hone Set

    $37.49

    A complete set of hones providing honing tools ranging from brake cylinders, small engines, and even automotive engine applications. Multi-hone set includes 3 complete Hones and a set of 2″ stones.

    • Part #31000: Hone for 3⁄4″ – 2 1⁄2″ capacity  11⁄8″, medium grit stones. Used for brake master cylinders and wheel cylinders.
    • Part #31500: Hone for 1⁄2″ – 2 1/4″ capacity 11⁄8″, medium grit stones. Used for small auto brake wheel cylinders.
    • Part #32000: Hone for 1 1⁄4″ – 3 1⁄2″ capacity 3⁄4″, medium grit stones. Used for disc brake caliper and lawn and garden applications.
    • Part #32100: Medium grit replacement stones, set of 3.

    UPC: 047084330005
    Shipping weight: .6lbs

    Quick View