Pullers and Installers
Showing 25–36 of 45 resultsSorted by popularity
-
10 Ton Push Puller
$153.79Part No: 18100CV
10 Ton Push Puller
$153.79The 10-Ton Push Puller is designed to push or pull depending on how the puller is set up. Ideally to be used with various pulling attachments when needing to remove press fitted parts such as bearings, gears and other components.
- Designed to remove and install press to fit parts, gears, bearing and shafts
- Can be used with bearing pullers and pulley pulling attachments
- 10-Ton Capacity
- Cross Bar spread range 2-1/8″-7-1/4″
- Maximum reach of 8-1/4″
- Heavy Duty Truck Applications
UPC: 047084181003
Shipping weight: 7.25lbsQuick View -
Sheppard M110 Pitman Arm Puller
$219.77Part No: 18630CV
Sheppard M110 Pitman Arm Puller
$219.77- Replaces less effective and often destructive methods to remove pitman arms
- Constructed of high-strength materials for increased pulling power
- Rated for usage with up to a 3/4″ drive impact for faster removal
- Applicable to highway transportation vehicles, RVs, buses, and equipment
UPC: 047084186305
Shipping weight: 11lbs18630 Sheppard M110 Pitman Arm Puller Flyer
Also available:
18620 Sheppard M100 Pitman Arm Puller
18640 Intermediate Pitman Arm PullerQuick View -
Heavy-Duty Bearing Cup Installer
$181.32Part No: 20300CV
Heavy-Duty Bearing Cup Installer
$181.32Accurately install bearing cups in minutes into the Dana/Spicer SPL Life Series quick-disconnect u-joints. The press plate and specific adapters make proper installation easy every time while also reducing the risk of damage to the driveshaft, yokes, and joints.
- Three adapters to fit SPL 140, 170, 250 Series drivelines
- Use on quick disconnect universal joint only
- Safer alternative to makeshift methods
- Can be used with hand and air tools
- Great partner tool for Heavy Duty U-Joint Puller (Part No.199) and Heavy Duty Yoke Puller (Part No. 497)
- Applications:
- Dana®/Spicer® SPL 140, 170, and 250 Series U-joints found in class 6-8 commercial vehicles and equipment
UPC: 047084203002
Shipping weight: 12.5lbs20300CV Heavy Duty Bearing Cup Installer Instructions
Quick View -
Bearing Cup Installer
$115.75Part No: 20200CV
Bearing Cup Installer
$115.75An encased magnet is utilized for installation, retaining the new bearing cup in place over the yoke assembly opposite the forcing screw. Once this assembly is secured, a second bearing cup is positioned for installation by means of the plunger found at the end of the forcing screw. An impact or hand wrench is applied to the forcing screw, securing the first bearing cup in place and allowing installation of the first retaining clip.
- Internal magnetic end to hold bearing cup
- 5-5/8″ spread
- Install two bearing cups in one procedure on virtually all medium and light duty U-joints
- Manufactured from high-grade steel for strength and durability.
- Simple to use for instant results
- Applications: Light Duty to Medium Duty U joints.
Parts Breakdown:
20201 C Frame
20202 Forcing Screw
20203 Flat Press Adapter
20204 O RingDimensions: 11.5″ x 1.85″ x 5.17″
UPC: 047084202005
Shipping weight: 4.15lbsQuick View -
Intermediate U-Joint Puller
$116.03Part No: 907CV
Intermediate U-Joint Puller
$116.03The ideal solution for disassembling seized, stubborn U-joints quickly and easily of virtually all cars, light-duty trucks and farm machinery. This puller eliminates dangerous vise-and-socket or hammering removal methods. It will allow the user to remove U-joints without damaging the driveshaft, yokes, joints or bearing cups. It also eliminates the possibility of injury using other unsafe methods. Applications for this tool include U-joints with bearing cups 1.25” to 1.7” O.D. Our pullers are made of high-grade materials to ensure durability and strength.
• For disassembling seized U-joints of virtually all truck, medium-duty trucks, buses, and farm equipment
• Applicable to bearing cups 1.25” – 1.7” outer diameter
• Each component is manufactured from high-grade materials for strength and durability
• Eliminates the needs to employ dangerous and less effective methods like hammer-and-vise with a higher potential of damaging componentsUPC: 047084009079
Shipping Weight: 5.5lbsQuick View -
Light-Duty U-Joint Puller
$99.20Part No: 905CV
Light-Duty U-Joint Puller
$99.20The ideal solution for disassembling seized, stubborn U-joints quickly and easily of virtually all truck, medium-duty trucks, buses, and farm equipment. This puller eliminates dangerous vise-and-socket or hammering removal methods. It will allow the user to remove U-joints without damaging the driveshaft, yokes, joints or bearing cups. It also eliminates the possibility of injury using other unsafe methods. Applications for this tool include U-joints with bearing cups 1” to 1.25” O.D. Our pullers are made of high-grade materials to ensure durability and strength.
- For disassembling seized U-joints of virtually all cars, light-duty trucks and farm machinery
- Applicable to bearing cups 1” – 1.25” outer diameter
- Each component is manufactured from high-grade materials for strength and durability
- Eliminates the needs to employ dangerous and less effective methods like hammer-and-vise with a higher potential of damaging components
UPC: 047084009055
Shipping Weight: 3.22lbs.Quick View -
Heavy Duty U-Joint Puller
$195.60Part No: 199CV
Heavy Duty U-Joint Puller
$195.60A heavy-duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks and machinery.
- Manufactured from high-grade materials for strength and durability
- Engineered for use up to a 1″ Impact wrench
- Reduces damage to the driveshaft, yokes, joints or bearing cups
- For U-Joints with bearing cups 1.5″ to 2.2″ O.D.
- Eliminates dangerous vice-and-socket or hammering removal methods
Applications:
- U-Joints with bearing cups 1.5″ to 2.2″ O.D
- Spicer 1610, 1710, 1760, 1810, 1880 Series
- Spicer SPL 140, 170, & 250 Life Series
- Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
- Meritor RPL 20, 25 Permalube™ Series
UPC: 047084001998
Shipping Weight: 11.85lbsQuick View -
Adjustable Three-Legged Puller
$114.13Part No: 957
Adjustable Three-Legged Puller
$114.13- 3 jaw, adjustable puller
- 2” to 5” Diameter
- 2″ Depth
- Jaws stay put before tension is applied for ease of use
- Low profile to reach into tight places
- A versatile puller for all your pulling needs
UPC: 047084009574
Shipping weight: 2lbsQuick View -
Timing Pulley Puller
$117.80Part No: 181
Timing Pulley Puller
$117.80The Face Groove Timing Pulley Puller is designed for removing drive pulleys with face grooves with 3, 6, or 9 slots. With adjustable legs, the tool is adaptable to different pulley diameters ranging from 42mm – 82mm.
- Removes a pulley absolutely free of any risk of damage
- Adaptable to different pulley diameters, as the legs are adjustable
- For removing pulleys with 3, 6, 9 slots
- Range: 42 -82mm
UPC: 047084001813
Shipping Weight: 2.35lbsQuick View -
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$90.30Part No: 951
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$90.30These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
- 5-ton
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components heat-treated
- 3-1/2″, 7″ spread, center screw 9/16″ – 20″ x 6-3/8″
UPC: 047084009512
Shipping weight: 3.7lbsAlso available:
134 Two & Three Jaw Combination Puller, 4″ Spread
952 Two & Three Jaw Adjustable Combination Puller, 8″ SpreadQuick View -
Pilot Bearing Puller
$58.41Part No: 31
Pilot Bearing Puller
$58.41- When working space is limited this puller is needed to remove flywheel pilot bearings from automobile trucks and tractors.
- Can also be used to pull bushings or bearings from generators or starters
- Only 7-1/2″ long
- Includes 1/2” – 1-1/4″ I.D. capacity jaws
UPC: 047084000311
Shipping Weight: 2.3lbsQuick View -
Pilot Bearing Puller with Slide Hammer
$70.43Part No: 28
Pilot Bearing Puller with Slide Hammer
$70.43- Removes bearings or bushings on flywheels, pumps, generators, etc.
- 1/2“ – 1-3/8″ (13mm-32mm) I.D. capacity jaws.
- Includes 3lb. Slide Hammer
- The middle rod stretches forged steel jaws, pushing them out against the bearing for effortless extraction of bearing or any other parts that are in confined spaces
UPC: 047084000281
Shipping Weight: 3.65lbsQuick View
