Pullers and Installers
Showing 13–24 of 45 resultsSorted by popularity
-
Heavy Duty Yoke Puller
$357.14Part No: 497CV
Heavy Duty Yoke Puller
$357.14Simplifies and expedites the removal of heavy-duty yokes on driveshafts, transmissions, and drive axles without damage to yokes or other components. Also, the caps are designed with flexibility in mind to service an extensive range of class 6-8 trucks.
- Fits on multiple Spicer full and half round yokes
- Fits on Meritor (Rockwell) RPL 20 & 25 series
- Manufactured from high grade steel
- Removal on yokes with bearing diameters between 1-7/8″ – 2-3/16″
UPC: 047084004975
Shipping Weight: 12.75lbsQuick View -
Clutch Alignment Tool
$43.96Part No: 20CV
Clutch Alignment Tool
$43.96Used to align single disc clutches on most domestic and imported vehicles. Set contains 4 two-step SAE pilot bushings, 2 metric two-step pilot bushings, 1 center shaft, and a tapered alignment cone with a 1-1/8″ maximum diameter taper.
• Designed to align clutch plates and pilot bearings accurately
• Used to align single disc clutches on most domestic and imported vehicles
• Contains 4 SAE two-step pilot bushings, 4 metric two-step pilot bushings, a center shaft with knurled handle, and a tapered alignment cone for up to 1-1/8” diameters.UPC: 047084000205
Shipping Weight: 2.10lbs.Quick View -
Seal Puller
$46.91Part No: 49600
Seal Puller
$46.91This heavy duty seal puller removes metal or rubber, full lip seals.
- Recessed cone adapter to hold screw
- Locks screw into place enabling shaft to turn by handle to force screw through seal
- 17-in. long shaft enables high pulling force
UPC: 047084496008
Shipping weight: 2.95lbsQuick View -
Bearing Splitter, Medium
$89.86Part No: 509CV
Bearing Splitter, Medium
$89.86Designed to remove and pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Capacity 3″ to 4-1/2″
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
- 3 Ton Capacity
UPC: 047084005095
Shipping Weight: 4.29lbsQuick View -
Steering Wheel Puller
$33.35Part No: 187
Steering Wheel Puller
$33.35- This tool is designed to pull steering wheels on all major makes of automobiles.
- 5/8″ x 4″ center screw is equipped with a floating swivel to prevent damage to horn wire connections.
- Five sets of side screws provided.
UPC: 047084001875
Shipping Weight: 2.16lbsQuick View -
Bearing Splitter, Small
$59.05Part No: 508CV
Bearing Splitter, Small
$59.05Designed to remove and pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Capacity 1-1/4″ to 2-1/4″
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
UPC: 047084005088
Shipping Weight: 1.33lbsQuick View -
Pitman Arm Spreader
$100.00Part No: 18650CV
Pitman Arm Spreader
$100.00The Pitman Arm Spreader provides for the quick and safe removal of pitman arms on 2-ton and larger trucks. The high-strength, adjustable pulling arms fit various widths of pitman arms for easy installation and removal of the tool. Made of 4140 heat-treated steel, the pitman arm spreader can be used with up to a 1/2″ impact wrench. Simply slip it on for instant results.
- Used for pitman arms found on class 3-8 trucks and heavy duty equipment
- Fits Chevrolet® 3500/5500, Dodge® Ram 3500/5500, Ford® F-350/F-550, Isuzu® NPR, Freightliner®, Kenworth®, Mack®, Peterbilt®, Volvo® and other heavy duty applications
- Eliminates dangerous hammering and cutting torch removal methods
- Can be used with an 1/2″ impact wrench
UPC: 047084186503
Shipping weight: 2.75lbsQuick View -
Adjustable Bearing Pushing & Installer, Seal Driver
$82.42Part No: 506
Adjustable Bearing Pushing & Installer, Seal Driver
$82.42The adjustable bearing pusher and installer encompasses an all-in-one design that eliminates the need for a driver and different size adapters. The locking screw holds the adjustable jaws in place for one hand use.
- Adjustable, 4-stepped jaws with locking screw
- Durable sturdy aluminum construction
- Equipped with a steel capped striker shaft handle
- Jaws quickly adjust to accommodate bearing races and seals from .708” – 3.543” (18mm – 90mm)
- One hand use
UPC: 047084005064
Shipping Weight: 2.15lbsQuick View -
Master Harmonic Balancer & Pulley Installer
$158.05Part No: 38500
Master Harmonic Balancer & Pulley Installer
$158.05Two of our best-selling harmonic balancer installation sets combined to create a true “Master Set”. A wide-ranging set applicable to nearly any domestic or foreign applications.
- Install harmonic balancers on many popular late model Ford®, GM®, Dodge®, and Chrysler® engines with recessed threads for the crankshaft bolt and/or traditional setups
- Can be used for the installing underdrive or oversized pulleys
- Features four high-quality, long-reach threaded adapters, twelve standard, threaded adapters, force nut, and pressure bearing(s) to install balancers and pulleys with ease
- Long reach installer utilizes a heavy-duty, friction-free nut and pressure bearing assembly
- Offers more applications than other sets on the market
- Comes in a blow-molded case
UPC: 047084385005
Shipping weight: 6.54lbsQuick View -
9 Way Slide Hammer Puller Set
$159.34Part No: 956
9 Way Slide Hammer Puller Set
$159.34The 9 Way Slide Hammer Puller Set pulls flange-type rear axles and most front wheel drive hubs. The internal and external jaws provide a variety of combinations to pull bearings, seals and gears.
- Two and three-way cross blocks and cones provide the perfect jaw configuration for most jobs
- Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements
UPC: 047084009567
Shipping weight: 17.35lbsQuick View -
Two & Three Jaw Adjustable Combination Puller, 8″ Spread
$95.30Part No: 952
Two & Three Jaw Adjustable Combination Puller, 8″ Spread
$95.30These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
- 5-ton
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components are heat-treated
- 5-1/2″, 8″ spread, center screw 9/16″- 20 x 6-3/8″
UPC: 047084009529
Shipping weight: 3.7lbs952 Two & Three Jaw Combination Puller Flyer
Also available:
134 Two & Three Jaw Combination Puller
951 Two & Three Jaw Combination Reversible PullerQuick View -
Two & Three Jaw Combination Puller, 4″ Spread
$59.97Part No: 134
Two & Three Jaw Combination Puller, 4″ Spread
$59.97These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
- 2-ton
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components heat-treated
- 3-1/2″, 4″ spread, center screw 3/8″ – 24″ x 4-1/4″
UPC: 047084001349
Shipping Weight: 1.4lbsAlso available:
951 Two & Three Jaw Combination Reversible Puller
952 Two & Three Jaw Adjustable Combination PullerQuick View
