Pullers and Installers
Showing 1–12 of 45 resultsSorted by popularity
-
In-Line Dowel Pin Puller St, Metric
$175.82Part No: 95300
In-Line Dowel Pin Puller St, Metric
$175.82No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel.
- Simple and effective method for removing dowel pins
- Can be used with an air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow-molded case
- Patent pending
Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm
UPC: 047084953006
Shipping Weight: 3.65lbs95200, In-Line Dowel Pin Puller Set, SAE
95400, In-Line Dowel Pin Puller Master Set (SAE and Metric combined)Quick View -
In-Line Dowel Pin Puller Master Set
$274.73Part No: 95400
In-Line Dowel Pin Puller Master Set
$274.73No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel. Master Set includes both SAE and Metric collets.
- A simple and effective method for removing dowel pins
- Can be used with an air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow-molded case
- Patent pending
Contains:
SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mmUPC: 047084954003
Shipping Weight: 4.61lbs95200, In-Line Dowel Pin Puller Set, SAE Only
95300, In-Line Dowel Pin Puller Metric, Metric OnlyQuick View -
Body Dent & Seal Puller
$44.81Part No: 49500
Body Dent & Seal Puller
$44.81Tool used to pull dented sheet metal back into position.
- Equipped with a 2-1/2 lb slide hammer
- 13″ long shaft enables high pulling force
UPC: 047084495001
Shipping weight: 3lbsQuick View -
Stud Removal and Installation Kit- SAE
$46.15Part No: 95600CV
Stud Removal and Installation Kit- SAE
$46.15Using make-shift methods to remove and install studs is often ineffective and has a higher possibility to causing damage to the studs, meaning more work. This set is specifically designed to make it easier to do it the right way every time.
SAE version includes five installers and five removers in multiple sizes.
- Specifically designed to make stud removal and installation easier
- Eliminates the potential for damage to studs other methods often cause
- Contains common thread sizes
SAE thread sizes:5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14
UPC: 047084956007
Shipping Weight: 2lbsQuick View -
In-Line Dowel Pin Puller Set, SAE
$175.82Part No: 95200
In-Line Dowel Pin Puller Set, SAE
$175.82No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use outer sleeve and nut to extract the dowel.
- Simple and effective method for removing dowel pins
- Can be used with air ratchet, or traditional ratchets
- Elimination of the slide hammer saves time and money while eliminating the potential of injury
- Comes in a blow molded case
- Patent pending
SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
UPC: 047084952009
Shipping Weight: 3.65lbs95300, In-Line Dowel Pin Puller Metric, Metric
95400, In-Line Dowel Pin Puller Master Set95200 Dowel Pin Puller Instructions
Quick View -
Ratcheting Harmonic Balance Puller
$96.70Part No: 38000CV
Ratcheting Harmonic Balance Puller
$96.70Remove harmonic balancers without the hassle of trying to start bolts or the frustration of positioning multi-jointed puller legs.
- Three ratcheting legs with puller feet eliminate the need for bolts
- No need to remove the radiator or other components with this compact design
- Legs quickly adjust and hold their position
- Push turn click design
Applications:
FORD 5.0 Coyote
GM 5.3L, 5.7(LS1), 6.0(LS2), 6.2(LS3), and 7.0L
MISC Most three and six spoke harmonic balancers/pulleysUPC: 047084380000
Shipping Weight: 2.5lbsQuick View -
15 PC Light Duty Slide Hammer and Puller Set
$98.90Part No: 49700CV
15 PC Light Duty Slide Hammer and Puller Set
$98.90A versatile tool that can be used in many ways. The 2 lb slide hammer and an array of attachments can be utilized to aid in pulling seals, bearings, pressed studs, or even for straightening body panels.
- Slide hammer and accessories can be used in many applications
- Capable of inside spreads from 3/8″ to 1-1/4 and outer spreads up to 3″
- Puller reaches depths up to 2-1/2″
- All components are in a blow-molded case for easy storage and organization
UPC: 047084497005
Shipping Weight: 5.37lbsQuick View -
5-Ton Bar Type Puller Bearing Separator Set
$148.22Part No: 502CV
5-Ton Bar Type Puller Bearing Separator Set
$148.22This set includes two of our most popular bearing splitters (2″ and 3″), four sets of hex push-puller legs, and a bar-type puller head with a 9/16″ forcing screw. Separator tools can be used with bar puller and legs for a wide variety of pulling jobs. The 5″ puller cross-bar with a 6-1/4″ forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools.
- Includes a 2″ and 3″ puller
- Includes 4 sets of hex push-puller legs
- Separator tools can be used with bar pullers and legs or by themselves
- 5″ puller cross-bar can be used separately or in combination with pullers
UPC: 047084005026
Shipping Weight: 10.3lbsQuick View -
Bearing Splitter, Large
$159.34Part No: 511
Bearing Splitter, Large
$159.34Designed to pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Designed to remove and pull bearings in tight areas
- Capacity 4″ – 6″
- Removes thin faced & cone shape gears, with a beveled edge that can be easily placed behind part to secure gripping surface
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
- Universal application
- Max spread: 8.375″
UPC: 047084005118
Shipping weight: 12lbsQuick View -
Harmonic Balancer Puller
$30.80Part No: 189
Harmonic Balancer Puller
$30.80The Harmonic Balancer Puller is designed to pull balancers, vibration dampers, pulleys, and gears with tapped holes. The four slots in the yoke allows the tool to be used in both two- and three-hole applications.
- Fits most domestic and import vehicles
- Center screw designed with removable, floating swivel prevents damage to shaft ends
- Yoke is forged from high-grade, heat-treated alloy steel and zinc plated for long life
- Metric and SAE bolts included
UPC: 047084001899
Shipping Weight: 2.3lbsQuick View -
Stud Remover
$39.25Part No: 19
Stud Remover
$39.25This powerful stud removing tool is designed to remove rusted, broken, seized bolts and studs with ease. Ideal use in tight access and hard to reach applications. Has a capacity range of 1/4″ up to 3/4″ (6MM to 19MM) diameter or bolt. Roller assembly grips like a pipe wrench and uses a cam action to grasp material firmly for removal. Use with a 1/2″ Dr. ratchet or breaker bar.
FEATURES
- This powerful tool is designed to fit into hard-to-reach spots and to remove hard-to-turn studs.
- Will remove broken studs with threads with material above the surface.
- Capacity from 1/4″ – 3/4″ (6-19mm) diameter.
- Zinc plated.
- Roller assembly grips like a pipe wrench.
- Works with a 1/2″ drive
UPC: 047084000199
Shipping Weight: 1.25lbs.Quick View -
7-Ton Bar Type Puller Bearing Separator Set
$192.22Part No: 501CV
7-Ton Bar Type Puller Bearing Separator Set
$192.22This Puller/bearing separator set was created for difficult jobs. With the capacity for larger applications up to 7-tons, it also has a greater reach of 8 to 16 inches.
- Includes a Bearing Splitter with 4″ capacity, two sets of hex push puller legs, and an 8″ bar-type puller head mated with a custom thread forcing screw
- Professionals have a Puller-Bearing set for hard jobs up to 7-tons
- Larger applications and a greater reach 8″ to 16″
UPC: 047084005019
Shipping Weight: 17.05lbsQuick View
