CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Pullers and Installers

  • Bolt Retained Cup Installer

    Bolt Retained Cup Installer

    $48.65

    Part No: 18510CV

    Bolt Retained Cup Installer

    $48.65

    Makes fast and easy work of installing bolt retained bearing cups of 1610 to 1880 universal joints commonly found of class 6-8 vehicles. Uses the bolt holes of the flange to ensure proper alignment of the cup and eliminates damage often caused by common installation methods.

    • Easily and quickly installs the U joint bearing cups on series 1610-1880 yokes on class 6-8 vehicles
    • Two guide bolts, utilizing the bolt holes of the yoke, to effortlessly achieve the proper alignment every time
    • Eliminates damage to cups, seals, or needle bearings
    • Impact rated

    Applications: 1610-1880 Series full round yokes/Class 6-8 vehicles

    UPC: 047084185100
    Shipping weight: 1.5lbs

    18510 Instructions

    18510 Parts Breakdown

    18510 Bolt Retained Bearing Cup Installer Flyer

    Quick View
  • Seal Puller

    Seal Puller

    $42.69

    Part No: 49600

    Seal Puller

    $42.69

    This heavy duty seal puller removes metal or rubber, full lip seals.

    • Recessed cone adapter to hold screw
    • Locks screw into place enabling shaft to turn by handle to force screw through seal
    • 17-in. long shaft enables high pulling force

    UPC: 047084496008
    Shipping weight: 2.95lbs

    Available on backorder

    Quick View
  • Stud Removal and Installation Kit- SAE

    Stud Removal and Installation Kit- SAE

    $42.00

    Part No: 95600CV

    Stud Removal and Installation Kit- SAE

    $42.00

    Using make-shift methods to remove and install studs is often ineffective and has a higher possibility to causing damage to the studs, meaning more work. This set is specifically designed to make it easier to do it the right way every time.

    SAE version includes five installers and five removers in multiple sizes.

    • Specifically designed to make stud removal and installation easier
    • Eliminates the potential for damage to studs other methods often cause
    • Contains common thread sizes

    SAE thread sizes:5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14

    UPC: 047084956007
    Shipping Weight: 2lbs

    95600 Instructions

    95600 Stud Removal and Installation Kit Flyer

    Quick View
  • Body Dent & Seal Puller

    Body Dent & Seal Puller

    $40.78

    Part No: 49500

    Body Dent & Seal Puller

    $40.78

    Tool used to pull dented sheet metal back into position.

    • Equipped with a 2-1/2 lb slide hammer
    • 13″ long shaft enables high pulling force

    UPC: 047084495001
    Shipping weight: 3lbs

    Available on backorder

    Quick View
  • Clutch Alignment Tool

    Clutch Alignment Tool

    $40.00

    Part No: 20CV

    Clutch Alignment Tool

    $40.00

    Used to align single disc clutches on most domestic and imported vehicles. Set contains 4 two-step SAE pilot bushings, 2 metric two-step pilot bushings, 1 center shaft, and a tapered alignment cone with a 1-1/8″ maximum diameter taper.

    • Designed to align clutch plates and pilot bearings accurately
    • Used to align single disc clutches on most domestic and imported vehicles
    • Contains 4 SAE two-step pilot bushings, 4 metric two-step pilot bushings, a center shaft with knurled handle, and a tapered alignment cone for up to 1-1/8” diameters.

    UPC: 047084000205
    Shipping Weight: 2.10lbs.

    20 Clutch Alignment Tool Flyer

    Quick View
  • Stud Remover

    Stud Remover

    $35.72

    Part No: 19

    Stud Remover

    $35.72

    This powerful stud removing tool is designed to remove rusted, broken, seized bolts and studs with ease. Ideal use in tight access and hard to reach applications. Has a capacity range of 1/4″ up to 3/4″ (6MM to 19MM) diameter or bolt. Roller assembly grips like a pipe wrench and uses a cam action to grasp material firmly for removal. Use with a 1/2″ Dr. ratchet or breaker bar.

    FEATURES

    • This powerful tool is designed to fit into hard-to-reach spots and to remove hard-to-turn studs.
    • Will remove broken studs with threads with material above the surface.
    • Capacity from 1/4″ – 3/4″ (6-19mm) diameter.
    • Zinc plated.
    • Roller assembly grips like a pipe wrench.
    • Works with a 1/2″ drive

    UPC: 047084000199
    Shipping Weight: 1.25lbs.

    Quick View
  • BMW® AC Belt Installation Tool

    BMW® AC Belt Installation Tool

    $30.55

    Part No: 732

    BMW® AC Belt Installation Tool

    $30.55
    • Used for the installation of AC Belts on BMW® cars
    • Specifically crafted for BMW® years 2006 – 2010 & 2012 – 2015 vehicles.
    • Designed for use on BMW® V8 N62 Vehicles

    UPC: 047084007327
    Shipping weight: .2lb

    Quick View
  • Steering Wheel Puller

    Steering Wheel Puller

    $30.35

    Part No: 187

    Steering Wheel Puller

    $30.35
    • This tool is designed to pull steering wheels on all major makes of automobiles.
    • 5/8″ x 4″ center screw is equipped with a floating swivel to prevent damage to horn wire connections.
    • Five sets of side screws provided.

    UPC: 047084001875
    Shipping Weight: 2.16lbs

    187 Steering Wheel Puller Breakdown

    Quick View
  • Harmonic Balancer Puller

    Harmonic Balancer Puller

    $28.03

    Part No: 189

    Harmonic Balancer Puller

    $28.03
    • Designed to pull balancers, vibration dampers, pulleys, and gears with tapped holes
    • Fits most domestic and import vehicles
    • Four slots in yoke allows tool to be used in both two and three hole applications.
    • Removable, floating swivel prevents damage to shaft.
    • Yoke is forged from high grade alloy steel and heat treated
    • Metric and SAE bolts included

    UPC: 047084001899
    Shipping Weight: 2.3lbs

    Quick View