CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Engine

  • Power Steering Pump Remover and Installer Kit

    $73.77

    Part No: 195CV

    Power Steering Pump Remover and Installer Kit

    $73.77

    This kit has nearly everything you need to remove and install power steering pump pulleys in Chrysler, Ford, and GM vehicles with Saginaw, Thompson, and Ford C111 and C2 power steering pumps.

    • Fits 1-1/8″, 1-1/4″, 1-5/16″, and 1-3/8″ pulley hub diameters including:
      • 1988 – newer GM cars equipped with Quad 4 engines
      • 1991 – 94 GM 3.1L V6
      • 1991 – newer 3800 V6 engines
      • 1994 – newer GM 3100 V6
      • 1999 – newer GM 3400 V6
      • 1992 – newer Ford Crown Victoria and Mercury Grand Marquis with 4.6 V8 engine
      • 1997-newer Ford truck with 4.2 & 4.6 V6, 5.4 V8, and 6.8 V10 engines

    UPC: 047084001950
    Shipping Weight: 2.09lbs

    195 – Power Steering Pump Remover & Installer Kit Breakdown

    Quick View

  • Harmonic Balancer Installer

    $70.00

    Part No: 38800

    Harmonic Balancer Installer

    $70.00

    FEATURES

    • A must to properly install harmonic balancers or drive pulleys that are pressed on one or two groove pulleys on the crankshaft.
    • Instructions Included
    • Use with Cal Van 189 Harmonic Balancer Puller – Remover
    Quick View

  • Ford Triton Spark Plug Extractor Kit

    $60.00

    Part No: 39100

    Ford Triton Spark Plug Extractor Kit

    $60.00

    FEATURES

    • This new item works to extract frozen and broken off spark plug sleeves in 2004 to present Ford Triton Engines.
    • Specially machined guide works with extra long tap and extractor to make sure the job is done right.
    • This is a heavily requested application that will only get more popular
    Quick View

  • Piston Ring Compressor Set

    $60.00

    Part No: 641

    Piston Ring Compressor Set

    $60.00

    FEATURES

    • Seven piece set installs piston rings from 2 7⁄8″ to 4 3/8″ (73mm to 111mm).
    • Works both vertically and horizontally.
    • Set includes fine tooth ratcheting pliers for accurate compression and 6 interchangeable bands.
    • Interchangeable Bands: No. 6411 Band Size 2 7/8 in to 3 1/8 in
    • No. 6412 Band Size 3 1/8 in to 3 3/8 in
    • No. 6413 Band Size 3 3/8 in to 3 5/8 in
    • No. 6414 Band Size 3 5/8 in to 3 7/8 in
    • No. 6415 Band Size 3 7/8 in to 4 1/8 in
    • No. 6416 Band Size 4 1/8 in to 4 3/8 in
    Quick View

  • Ford EcoBoost Long Reach Harmonic Balancer Installer

    $48.37

    Part No: 38710

    Ford EcoBoost Long Reach Harmonic Balancer Installer

    $48.37

    The Ford™ EcoBoost™ Long Reach Balancer Installer was designed to achieve easy installation of harmonic balancers of Ford EcoBoost and various other Ford/Lincoln engines from 2011 to 2018. This tool is perfect for hard to access areas, especially on FWD vehicles. The highlight of this tool, besides the ease of use, is the nut and bearing sleeve. This assembly reduces friction, ensuring proper fit during installation. Included spacer to fit into pulleys and limit interference. Can be used on 2.7L, 3.0L, 3.3L, 3.5L and even 5.0L engines in Ford/Lincoln cars, trucks, and SUVs.

    Features and Benefits:

    • Easily install the harmonic balancer on to the crankshaft of multiple Ford® Ecoboost® engines
    • Nut and bearing sleeve assembly reduces friction while ensuring a proper fit
    • Accesses hard to reach areas

    Applications:

    • Ford Edge equipped with 2.7L EcoBoost (238kW/324PS) model years 2015, 2016, 2017, and 2018.
    • Ford F-150 equipped with 2.7L EcoBoost (238kW/324PS) or 5.0L 32V Ti-VCT model years 2015, 2016, 2017, and 2018.
    • Ford F-150 equipped with 3.3L Duratec – V6 model year 2018.
    • Ford F-150 and Mustang equipped with 5.0L (4V) model years 2011, 2012, 2013, and 2014.
    • Ford Fusion equipped with 2.7L EcoBoost (238kW/324PS) model years 2017 and 2018.
    • Ford Mustang equipped with 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS) or 5.2L 32V Ti-VCT model years 2015, 2016, 2017, and 2018.
    • Lincoln Continental equipped with 2.7L EcoBoost (238kW/324PS) or 3.0L EcoBoost model years 2017 and 2018.
    • Lincoln MKX equipped with 2.7L EcoBoost (238kW/324PS) model years 2016, 2017, and 2018.
    • Lincoln MKZ equipped with 3.0L EcoBoost model years 2017 and 2018.
    Quick View

  • Ford & Mazda Engine Valve Timing Kit

    $48.37

    Part No: 38300

    Ford & Mazda Engine Valve Timing Kit

    $48.37

    FEATURES

    • For Servicing the Timing Belt Chains Head Gaskets or Other Valve Train Repairs on Ford Mercury and Mazda Vehicles.
    • Applications: The camshaft bar and Easy alignment tool are used on 2.0L DOHC Zetec engines found in 1994-2003 Ford and Mercury vehicles and 2004-2012 2.5L DOHC 2.3L DOHC 4V and 2.0L DOHC engines that are found in Ford Mercury and Mazda vehicles.
    • Easy alignment tool takes place of pins needed in similar tools. Pins can be hard to access and add time to job in cases where other components are needed. Also with pins user error can lead to pins being bent and stuck. Easy alignment tool is screwed into sparkplug hole and turned by wrench to align cams.
    • This tool positions number 1 cylinder to Top dead center by holding number 2 or 3 cylinder to botom dead center.
    Quick View

  • Ford & Mazda Crankshaft Holder

    $40.00

    Part No: 38100

    Ford & Mazda Crankshaft Holder

    $40.00

    A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt on many popular Ford and Mazda vehicles, or it can be used to turn the engine when doing timing work.

    • Adapter securely fits the crankshaft tokeep it from rotating when loosening the pulley bolt
    • The ½” drive tab allows for the use of a ratchet or breaker bar
    • Ideal for timing-related jobs
    • Heavy-duty construction and a rust resistant finish

    Applications: Ford/Mazda 2005 2011 2.0L/2.3L/2.5L (including some Mercury and Volvo applications) (Hybrid models also)

    Models: (Ford) Focus, Fusion, Escape, Ranger, Transit; (Mazda) MX 2,MX 3, MX 5, MX 6; CX 5, CX 9; (Mercury) Milan, MKZ, Mariner

    Warranty: Lifetime Against Defects

    Quick View

  • Engine Cylinder Hone

    $36.88

    Part No: 360

    Engine Cylinder Hone

    $36.88

    Extremely versatile hone for 2″ – 7″ (56mm – 178mm) diameter cylinders found on cars, trucks, buses, tractors, industrial engines and small, air-cooled engines.

    • Adjustable to all diameters within its range.
    • Flexible shaft controlled spring action; spread control limiters are features that contribute to faster changing from one cylinder to another with the fastest cutting action.
    • Includes 4″ (102mm) Medium Grit Stones.
    • Operate with a high or low speed drill.
    • Replacement Stones:
      • 361 Replacement Stone Medium Grit, 220-240 Grit. Set of 3
      • 361-01 Replacement Stone Fine Grit, 400 Grit. Set of 3
      • 361-02 Replacement Stone Coarse Grit, 100 Grit. Set of 3

    UPC: 047084003602
    Shipping Weight: 1.1lbs

    Quick View

  • Subaru Crank Pulley Tool

    $36.00

    Part No: 198

    Subaru Crank Pulley Tool

    $36.00

    The use of this tool eliminates the need to remove the radiator to make space for an impact wrench. Time is saved by not having to refill and bleed the air out of the cooling system when changing a timing belt.

    • Tool designed to hold harmonic balancer for removal and installation.
    • This tool combines the individual tools available into one tool, while also increasing applications.
    • Applications: 1.8L, 2.2L, 2.2L Turbo, and 2.5L Subaru motors

    UPC: 047084001981
    Shipping Weight: 2.1lbs

    Quick View

  • 2 Valve Replacement Insert

    $35.85

    Part No: 389-100

    2 Valve Replacement Insert

    $35.85

    Replacement insert for the 2 Valve Ford Triton Engine kit, part 38900.

    • 14mm x 1.25
    • 3/4″-16 OD
    • Works with Ford Triton Motors ’96 – ’03
    • Sold individually
    • Steel alloy with black oxide finish

    UPC: 047084389102
    Shipping Weight: .05lbs

    Quick View

  • Ford Harmonic Balancer Holder

    $35.00

    Part No: 38110

    Ford Harmonic Balancer Holder

    $35.00

    A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt-on popular Ford engines, or it can be used to turn the engine when doing timing work.

    • Designed to fit multiple Ford vehicles ranging from 1992 to 2016
    • The adapter securely fits the crankshaft to keep it from rotating when loosening the pulley bolt
    • The ½” drive knockout allows for the use of a ratchet or breaker bar
    • Ideal for rotating the engine for timing-related jobs
    • Will not warp balancer
    • Heavy-duty construction
    Quick View

  • Adjustable Cylinder Hone Deglazer

    $34.00

    Part No: 32300

    Adjustable Cylinder Hone Deglazer

    $34.00

    FEATURES

    • Replacement Stones:
    • 324 Replacement Stone Medium Grit
    • 220-240 Replacement Stone set of 3 3in stones
    Quick View