Engine
Showing 25–35 of 35 resultsSorted by price: high to low
-
Ford 6.0L Diesel Head Bolt Adapter
$30.77Part No: 171CV
Ford 6.0L Diesel Head Bolt Adapter
$30.77Save time and money when removing and installing head bolts on Ford 6.0L diesel engines. There is no longer a need to remove the cab, worry about the rear heat shield or to disturb the A/C system with the access you with gain with this adapter.
- Designed to loosen and tighten diesel head bolts on 6.0L Powerstroke® diesel engines
- Offset of the adapter increases torque for loosening stubborn fasteners
- The low-profile allows for easy access to head bolts without the need to remove multiple engine components, saving time
- Reduces the overall time to complete engine work related to removing and installing cylinder heads
- Get access to the cylinder head bolts without the need to remove the cab or dealing with freon recovery when removing the evaporator
- ¾” Dr Female adapter with ½” Dr. Male
UPC: 047084001714
Shipping Weight: .99lbsQuick View -
5 PC Alternator Coupler Pulley (ADP) Kit
$29.92Part No: 756
5 PC Alternator Coupler Pulley (ADP) Kit
$29.92The 13 PC Alternator Coupler Pulley (ADP) Kit can be used to service both OWC (One-Way Clutch) and OAD (Overrunning Alternator Decoupler) style pulleys. OWC’s were first used in 1997 followed by the OAD in 1999. Today, more and more vehicle manufacturers are recognizing the performance gains achieved with these pulleys and have designed them into their belt drive systems.
- To remove these pulleys, the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counterclockwise, depending on the manufacturer. The opposite would be used in the installation
- Covers most US Euro makes and models with both on and off vehicle applications included, but not limited to: Audi®, BMW®, Buick®, Cadillac®, Chevrolet®, Chrysler® Citroen®, Dodge®, Fiat®, Ford®, Honda®, Lexus®, Mercury®, Mercedes-Benz®, Pontiac®, Porsche®, Saturn®, Scion®, Toyota®, VW®.
- Eliminates the need to shop around for hard-to-find OWC and OAD
- Set Includes: H22 x 33T, H17 x H19, H10 x 70mm L, 12mm x 75mm L x T50, Spline M10
UPC: 047084007563
Shipping weight: .6lbsQuick View -
The Grabber Serpentine Belt Tool
$29.00Part No: 734
The Grabber Serpentine Belt Tool
$29.00- Clamping jaw allows user to position serpentine belt without the belt slipping out of the tool.
- Tru-grip and long reach allows belt routing in tight access areas that would normally be difficult if not impossible.
- Body made of light-weight alloy steel for durability and strength.
- Ergonomic handle provides comfort and ease in use acting as an extension of the users hand.
- Patent Pending
UPC: 047084007341
Shipping weight: .95lbQuick View -
Ford® Spark Plug Porcelain Extractor Kit
$25.00Part No: 39200
Ford® Spark Plug Porcelain Extractor Kit
$25.00This tool is used to extract the broken porcelain from broken spark plugs in 2003 to current Ford® Triton Engines. In some cases, the porcelain will break off in the sleeve and will need to be extracted in order for the 39100 to function effectively. Unlike other tools that tell you to push the porcelain through the sleeve (Ford® says specifically not to do this), this tool adheres to the porcelain using a special perma-bond and then allows a user to extract the broken porcelain from the sleeve.
UPC: 047084392003
Shipping weight: .49lbsQuick View -
360 Degree Quick Disconnect Tool
$24.99Part No: 68600CV
360 Degree Quick Disconnect Tool
$24.99This handy quick disconnect tool allows the user to remove a two button type quick connector with one hand operation and easy to use in tight access applications. Multi angle design with a soft grip handle and durable curved jaws for easy and comfortable operation.
• Multi angle design with anti slip curved jaws
• Compact one handed operation for tight access applications
• Curved jaws with anti slip designUPC: 047084686003
Shipping weight: .125lbsQuick View -
Subaru® Stretch Belt Installer
$22.66Part No: 737
Subaru® Stretch Belt Installer
$22.66- All 2008 to current models of Subaru® Impreza, Outback, and Forrester feature a stretch belt.
- When replacing these belts due to access issues traditional tools and even current stretch belt tools will not work.
- Only tool on the market for this job
UPC: 047084007372
Shipping weight: .15lbQuick View -
GM® Thermostat Wrench
$21.00Part No: 751CV
GM® Thermostat Wrench
$21.00The GM® Thermostat Wrench is designed to work on GM® 3.1 & 3.4 liter, V6 engines. A common job on these motors, as is in all motors, is thermostat replacement and to do this you must remove the thermostat housing. In these applications, the bottom housing bolt is almost inaccessible without removing other parts – until now.
- Unique shape and design allows users to remove and install housings quickly
- 13 mm
- 12-point with special bends
- Works on GM® 3.1 and 3.4 liter, V6 engines
UPC: 047084007518
Shipping weight: .4lbsQuick View -
Euro Stretch Belt Installation Tool
$18.97Part No: 735
Euro Stretch Belt Installation Tool
$18.97- Larger with different pin configuration to accommodate larger pulleys with different designs found on many European vehicles.
- Quickly and easily installs stretch belts.
- Will not damage stretch belts during installation.
- Stretch Belts are being used more often in new vehicles and this tool is necessary in most applications.
- Eliminates the belt tensioner.
- Installation can be difficult because if the belt is twisted it can be damaged. This tool prevents that potential damage.
- Patented
UPC: 047084007358
Shipping weight: .2lbsQuick View -
Stretch Belt Installation Tool
$16.00Part No: 736
Stretch Belt Installation Tool
$16.00- Quickly and easily installs Stretch Belts.
- Will not damage stretch belts during installation.
- Stretch Belts are being used more often in new vehicles and this tool is necessary in most applications.
- Eliminates the belt tensioner.
- Installation can be difficult because if the belt is twisted it can be damaged. This tool prevents that potential damage.
- Patented
UPC: 047084007365
Shipping weight: .1lbsQuick View -
3 Valve Replacement Insert
$15.80Part No: 393-100
3 Valve Replacement Insert
$15.80Replacement insert for the 3 Valve Ford® Triton Engine kit, part 39300.
- 16mm x 1.5
- 3/4″-16 OD
- Works with 2004-2008 Three Valve Ford® Triton Engines
- Sold individually
- Steel alloy insert with black oxide finish
UPC: 047084393109
Shipping Weight: .05lbsQuick View -
Subaru® Hex Bit
$15.28Part No: 7541
Subaru® Hex Bit
$15.28Designed to securely fit the 10MM camshaft sprocket bolt (P.N.13199AA000) without stripping the bolt and or shearing bolt head off. 1″ sized socket with 6PT. It is recommended to apply to hex bit for loosening/tightening hex bolt. This bolt is used on a wide variety of Subaru STI engines.
- Specifically designed to fit Subaru® crankshaft sprocket bolt
- Designed for use with a 1″ socket or wrench
- Impact rated
Applications:
- 02-07 Subaru® Impreza WRX STI (exhaust cams only)
- 02+ Subaru® Impreza WRX (06+ WRX exhaust cams only)
- 04-08 Subaru® Forester XT (exhaust cams only)
- 05-10 Subaru® Legacy GT (exhaust cams only)
- 05-10 Subaru® Outback XT (exhaust cams only)
- 05-06 Saab® 9-2X
- 04-06 Subaru® Baja
- 04+ Subaru® Impreza WRX STI (intake cams only) *Includes JDM Ver.9 STI
- 06-14 Subaru® Impreza WRX (intake cams only)
- 04-11 Subaru® Forester XT (intake cams only)
- 05-10 Subaru® Legacy GT (intake cams only)
- 05-10 Subaru® Outback XT (intake cams only)
- 04-06 Subaru® Baja Turbo (intake cams only)
- 06 Saab® 9-2X Aero (intake cams only)
UPC: 047084075418
Shipping weight: .25lbsQuick View
