Shop

Showing 298–306 of 318 results

Tie Rod End Puller
$24.75
Part No: 194
Tie Rod End Puller
$24.75
Designed to easily separate tie rod ends and separate pitman arms from steering gears. Can be used to remove both tie rod ends and pitman arms on many small domestic rear wheel drive cars and light trucks.
- Cap screw has a 3/8″ Female drive
- 1-15/16″ of pull travel and over 1″ of jaw opening
- Replacement center screw: Part 194-1
UPC: 047084001943
Shipping Weight: 1lb
Tie Rod End Puller quantity
Quick View
Tie Rod End Tool Open Jaw 19mm
$41.92
Part No: 182
Tie Rod End Tool Open Jaw 19mm
$41.92
The tie rod end tool is designed to force out tie rod ends from spindles and steering arm on virtually all domestic and import cars with tie rod screw diameter up to 3/4″. Comes with a swivel head cup style end that removes the chance of damage and frustration caused by other less effective methods like hammering.
- Force out tie rod ends from spindles with tie rod screw diameter up to 3/4″
- Forces steering arms on virtually all domestic and import cars
- Opens to 1-5/8″
- Replacement center screw and swivel: 182-1
UPC: 047084001820
Shipping Weight: 1.5lbs

182 Tie Rod End Tool Flyer

Also available:
188 Outer Tie Rod Remover
194 Tie Rod End Puller
Tie Rod End Tool Open Jaw 19mm quantity
Quick View
Timing Pulley Puller
$117.80
Part No: 181
Timing Pulley Puller
$117.80
The Face Groove Timing Pulley Puller is designed for removing drive pulleys with face grooves with 3, 6, or 9 slots. With adjustable legs, the tool is adaptable to different pulley diameters ranging from 42mm – 82mm.
- Removes a pulley absolutely free of any risk of damage
- Adaptable to different pulley diameters, as the legs are adjustable
- For removing pulleys with 3, 6, 9 slots
- Range: 42 -82mm
UPC: 047084001813
Shipping Weight: 2.35lbs

181 Face Groove Pulley Puller Flyer
Timing Pulley Puller quantity
Quick View
Toyota® Brake Spring Tool
$20.88
Part No: 364
Toyota® Brake Spring Tool
$20.88
The low-profile design of this tool, allows the user to put the tip of this tool through the access hole and engage the parking brake spring cup, turn and release the pin on a variety of Toyota® vehicles.
- Special tip is designed to engage the shoe hold down spring cup
- Lower profile brake spring tool with a longer reach
- 2000 and current Tacoma, Tundra, FJ Cruiser, 4Runner, Land Cruiser, and Camry
UPC: 047084003640
Shipping Weight: .25lbs

364 Toyota Brake Spring Tool Flyer
Toyota® Brake Spring Tool quantity
Quick View
Toyota®/Lexus® Fuel Tank Lid Tool
$78.57
Part No: 25350CV
Toyota®/Lexus® Fuel Tank Lid Tool
$78.57
This fuel tank lock ring tool is designed to remove and install the locking rings for fuel tank sending units on various Toyota® and Lexus® vehicles from 2004 and up.
- 1/2″ DR. with 9 slot design
- Applies to many Toyota® & Lexus® vehicles from 2004 and up
- Tool fits firmly into the locking ring, eliminating the potential of damage to the ring, sending unit, or fuel lines
- Designed to be used with a 1/2″ drive ratchet or 21mm socket or wrench
- Do not use impact tool.
- Applications:
  
  Toyota® Applications (Model Year): Corolla (04-14), Land Cruiser (08-14), Matrix (04-14), Tacoma (05-14), and Yaris (07-11)
  Fuel Tank Locking Ring P/N’s: 77144-04010 and 7714-52040
  
  Lexus® Applications: RX330 (04-06), RX350 (07-14), and RX450H (10-14)
  Fuel Tank Locking Ring P/N: 7714-48020
UPC: 047084253502
Shipping weight: 1.95lbs

25350 Toyota Lexus Fuel Tank Lid Tool Flyer
Toyota®/Lexus® Fuel Tank Lid Tool quantity
Quick View
Truck & Tractor Oil Filter Pliers
$60.19
Part No: 291
Truck & Tractor Oil Filter Pliers
$60.19
- Spring-loaded, adjustable pliers can easily adjust from 3-3/4″ – 7″
- Heavy-forged construction creates leverage for high torque applications.
- Can be used in one hand applications.
UPC: 047084002919
Shipping Weight: 2.25lbs

291 Truck and Tractor Filter Pliers Flyer
Truck & Tractor Oil Filter Pliers quantity
Quick View
Tube Bend Mirror Adapters
$22.22
Part No: 75902
Tube Bend Mirror Adapters
$22.22
These adapters allow users to easily create matching bends and angles on two lines at the same time or use an existing tube to guide the creation of a replacement line. Remove the guesswork and do it right the first time.
- Adapters used to mirror or match the brake line runs for duplication of bends.
- Allows users to precisely match proper angles and points on run to make bends.
- For steel, copper, and plastic-coated brake lines with diameters of 3/16” (4.75mm) or ¼” (6.3mm)
UPC: 047084759028
Shipping Weight: .09lb

75902 Tube Bend Mirror Adapters Flyer
Tube Bend Mirror Adapters quantity
Quick View
Twin Spin Drive Converter 1/4″ – 3/8″
$20.27
Part No: 488
Twin Spin Drive Converter 1/4″ – 3/8″
$20.27
- Can be used to use a 1/4″ drive socket on a 3/8″ ratchet or a 3/8″ drive socket on a 1/4″ ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
UPC: 047084004883
Shipping Weight: .45lbs

488 Twin Spin Converter Flyer

Also available:
489 – Twin Spin Drive Converter 3/8″ – 1/2″
Twin Spin Drive Converter 1/4″ – 3/8″ quantity
Quick View
Twin Spin Drive Converter 3/8″ – 1/2″
$21.19
Part No: 489
Twin Spin Drive Converter 3/8″ – 1/2″
$21.19
- Can be used to use a 3/8″ drive socket on a 1/2″ ratchet or a 1/2″ drive socket on a 3/8″ ratchet.
- Can withstand higher torque than traditional adapters.
- Can be used as a small extension or hand drive for tight access.
- Patented
UPC: 047084004890
Shipping Weight: .3lbs

489 Twin Spin Drive Converter Flyer

Also available:
488 – Twin Spin Drive Converter 1/4″ – 3/8″
Twin Spin Drive Converter 3/8″ – 1/2″ quantity
Quick View