CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Projects

  • Mini-Mini Constant Tension Tube Cutter

    Mini-Mini Constant Tension Tube Cutter

    $29.67

    Part No: 159CV

    Mini-Mini Constant Tension Tube Cutter

    $29.67

    The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin-walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier.

    • 2” length allows tool to work effectively in tight spaces
    • Handles the smallest tubing up to 5/8” tubing
    • Spring-loaded pressure point that keep tension constantly on the tubing allows for a tighten 1 time and cut function
    • Professional grade cutter
    • Replaceable cutting wheel, part #159-1

    UPC: 047084001592
    Shipping Weight: .6lbs

    159 Mini-Mini Constant Tension Tube Cutter Flyer

    Also available:
    157 Constant Pressure Tube Cutter 3/16″ – 7/8″
    158 Constant Pressure Tube Cutter 1/8″ – 1-1/8″

    Quick View
  • SAE In-Line Flaring Tool

    SAE In-Line Flaring Tool

    $46.15

    Part No: 164

    SAE In-Line Flaring Tool

    $46.15

    The In Line Flaring Tool from Cal-Van Tools enables the user to flare copper or soft steel tubing in tight spaces with its low profile design. The design also enables the technician to use a ratchet or wrench. This new patented flaring tool design makes perfect single or double flares easily. The double clamp and hex body keeps tube from slipping, keeps flares centered, and makes the job of flaring easier. Superior to bar type flaring tools.

    • Make Perfect Flares Every Time!
    • Use to make single and double flares
    • Will do 3/16″, 1/4″ and 5/16″ flares
    • Low profile design allows for use on or off the vehicle
    • Designed to be used with a ratchet to make flares easier
    • In line design makes a more accurate flare
    • Double clamp and hex screw design keeps tubing locked tightly in position
    • For use on thin walled steel and copper tubing
    • Patent Pending

    UPC: 047084001646
    Shipping Weight: 1.5lbs

    164 In-Line Flaring Tool SAE Breakdown

    164 – In Line Flaring Instructions

    164 SAE In-Line Flaring Kit Flyer

    Also available:
    154 Metric In-Line Flaring Tool
    155 Automotive Bubble Flare Kit
    156 Metric In-Line Bubble Flaring Kit
    161 Automotive In-Line Flaring Tool
    165 Master In-Line Flaring Set

    Quick View
  • Amp Hound 2

    Amp Hound 2

    $178.33

    Part No: 72

    Amp Hound 2

    $178.33

    The Amp Hound 2 is a designated Amp meter for a safe and convenient method to determine real time readings of current and amps in fused circuit without removing the fuse. Convenient and easy adapters that attach to a fuse or just touch the probes to the top of the fuse for an amp reading.  A tone lets you know when you are touching a fuse that has parasitic draw and no need to remove fuse or stare at meter. Works on multiple fuse type along with three of the most common automotive fuse types. Very safe to use with no chance of shorting a circuit while the fuse is removed.

    • Real time readings of current and amps in fused circuit without removing fuse
    • For use on 6V, 12V and 24V systems only
    • Ideal for locating a parasitic drain
    • Special fuse adapters lock on to fuse to give user hands-free control
    • Includes all features from the original Amp Hound that allows easy component testing and parasitic drain location
    • Takes amperage readings without having to access hard to reach components
    • Audible tone when in contact with fuse, ensuring use has complete contact
    • Patent Pending
    • 1 year warranty
    • Replacement leads:
      • 72-1 Small
      • 72-2 Middle
      • 72-3 Large

    UPC: 047084000724
    Shipping Weight: 1.1lbs

    72 – Amp Hound 2 Manual 

    72 Amp Hound 2 Flyer

    Check out the “original” Amp Hound!

    Available on backorder

    Quick View
  • Hose Clamp Pliers

    Hose Clamp Pliers

    $46.01

    Part No: 59CV

    Hose Clamp Pliers

    $46.01

    Removing hose clamps is more difficult than it should be, and the Universal Hose Clamp Pliers remove that hassle, making the task quick and easy.

    • Special tip designed to grip almost any hose clamp from any direction
    • Locking, ratcheted jaws enable user to keep pliers locked onto clamps
    • Extra-long reach, 11″ overall length
    • Great for coolant tank ventilation line clamps, radiator hose clamps, transmission cooler lines and other applications
    • Repair Kit: Part #58-2 includes thumb screw, spring, and lever.

    UPC: 047084000595
    Shipping Weight: 1.02lbs

    59 Hose Clamp Pliers Flyer

    Quick View
  • In-Line Dowel Pin Puller Master Set

    In-Line Dowel Pin Puller Master Set

    $274.73

    Part No: 95400

    In-Line Dowel Pin Puller Master Set

    $274.73

    No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel. Master Set includes both SAE and Metric collets.

    • A simple and effective method for removing dowel pins
    • Can be used with an air ratchet, or traditional ratchets
    • Elimination of the slide hammer saves time and money while eliminating the potential of injury
    • Comes in a blow-molded case
    • Patent pending

    Contains:
    SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″
    Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm

    UPC: 047084954003
    Shipping Weight: 4.61lbs

    95200, In-Line Dowel Pin Puller Set, SAE Only
    95300, In-Line Dowel Pin Puller Metric, Metric Only

    95400 In-Line Dowel Pin Puller Master Set Breakdown

    95400 Dowel Pin Puller Instructions

    Quick View
  • In-Line Dowel Pin Puller St, Metric

    In-Line Dowel Pin Puller St, Metric

    $175.82

    Part No: 95300

    In-Line Dowel Pin Puller St, Metric

    $175.82

    No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use the outer sleeve and nut to extract the dowel.

    • Simple and effective method for removing dowel pins
    • Can be used with an air ratchet, or traditional ratchets
    • Elimination of the slide hammer saves time and money while eliminating the potential of injury
    • Comes in a blow-molded case
    • Patent pending

    Metric Set Includes: 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm

    UPC: 047084953006
    Shipping Weight: 3.65lbs

    95200, In-Line Dowel Pin Puller Set, SAE
    95400, In-Line Dowel Pin Puller Master Set (SAE and Metric combined)

    95300 – Metric Dowel Pin Puller Breakdown

    95300 Dowel Pin Puller Instructions

    Quick View
  • In-Line Dowel Pin Puller Set, SAE

    In-Line Dowel Pin Puller Set, SAE

    $175.82

    Part No: 95200

    In-Line Dowel Pin Puller Set, SAE

    $175.82

    No longer will there be a need for a slide hammer when extracting dowel pins. Simply fit the appropriately sized collet over the dowel, tighten the sleeve, and use outer sleeve and nut to extract the dowel.

    • Simple and effective method for removing dowel pins
    • Can be used with air ratchet, or traditional ratchets
    • Elimination of the slide hammer saves time and money while eliminating the potential of injury
    • Comes in a blow molded case
    • Patent pending

    SAE Set includes: 3/16 , 1/4″, 5/16″, 3/8″, and 1/2″

    UPC: 047084952009
    Shipping Weight: 3.65lbs

    95300, In-Line Dowel Pin Puller Metric, Metric
    95400, In-Line Dowel Pin Puller Master Set

    95200 Breakdown

    95200 Dowel Pin Puller Instructions

     

    Quick View
  • Hub Puller

    Hub Puller

    $148.35

    Part No: 94800

    Hub Puller

    $148.35
    • Removes wheel hubs mounted on tapered axles and press fit rear brake drums
    • Can be adjusted by legs to an 8″ diameter bolt circle
    • Heavy-duty construction, made of alloy steel and drop forged
    • Center screw: 1″-14″ x 9″  Hex Head: 1″-1/8″

    UPC: 047084948002
    Shipping weight: 10.75lbs

    Quick View
  • Coil Spring Clamps

    Coil Spring Clamps

    $97.24

    Part No: 91000

    Coil Spring Clamps

    $97.24
    • Three piece, heavy-duty tool allows for easy removal or installation, where removal of spring through the center is not possible.
    • Set clamps in any position.
    • Tool comes with three safety U-Bolts.
    • Not for use with impact tools.

    UPC: 047084910009
    Shipping weight: 6.45lbs

    Quick View
  • Master Spring Compressor Set

    Master Spring Compressor Set

    $104.40

    Part No: 90200

    Master Spring Compressor Set

    $104.40

    Features our two most popular Spring Compressors 513 Master MacPherson Strut Tool and the 510 Coil Spring Compressor.

    • Packaged in Heavy Duty Blow molded case.
    • Includes: Spring gauge Acme threaded rod.
    • 513 Features Built in Safety Pins
    • 2-in-1 Tool
    • Not for use with impact tools.

    UPC: 047084902004
    Shipping weight: 11lbs

    90200 – Master Spring Compressor Set Breakdown

    Quick View
  • Hub Tool

    Hub Tool

    $53.85

    Part No: 90100

    Hub Tool

    $53.85

    This tool is designed for removing the hub assembly from Ford® 4-Wheel Drive Pickup Trucks when replacing ball joints without causing damage to the wheel bearings.

    • Enables the technician to drive wheel bearings out from the back of the hub assembly by threading the tool over the hub assembly stud.
    • The tool has threads that match those of the four 1/2″ hub assembly studs.
    • Includes adapter for Dodge® applications.
    • Patent pending.

    UPC: 047084901007
    Shipping weight: 1.35lbs

    90100 Hub Tool Breakdown

    90100 Hub Tool Flyer

    Quick View
  • Double & Bubble Flaring Tool Set

    Double & Bubble Flaring Tool Set

    $115.57

    Part No: 82900

    Double & Bubble Flaring Tool Set

    $115.57

    This set contains the tools necessary to create single or double flares, as well as Bubble Flares, on soft steel and copper tubing.

    • 2-in-1 kit contains the Double Flare Tool (163) and the Bubble Flare Tool (82700) in one convenient blow molded case.
    • Single & Double Flares 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ tubing.
    • Bubble Flares 4.75mm, 6mm, 8mm, 10mm tubing.
    • Includes Tube Cutter (151).

    UPC: 047084829004
    Shipping weight: 4.4lbs

    82900 Metric & SAE Flaring Kit Breakdown

    Also Available:
    153 Metric Double Flaring Tool
    163 SAE Double Flaring Tool
    82700 Metric Bubble Flaring Tool
    82800 SAE Tube Service Set

    Quick View