Products
Showing 73–84 of 319 resultsSorted by price: high to low
-
Large and Small OFW Set
$84.29Part No: 29200
Large and Small OFW Set
$84.29Combination set of the 302 and 29200 oil filter wrenches:
- Part #302 – Adjustable Oil Filter Pliers: Self-adjusting, spring action (NOT a slip joint) oil filter pliers allow for a full range of filter applications. Heavy-duty, forged construction with textured grip add both strengthened leverage to the tool. Fits filters from 2-1/4″ to 6″ (57mm-152mm).
- Part #29900 – Truck & Tractor Oil Filter Pliers: Spring loaded adjustable pliers can easily adjust from 3-3/4″ to 7-1/2″. Heavy forged construction creates leverage for high torque applications. Can be used in one hand applications. 299-REPAIR kit is available.
UPC: 047084292006
Shipping weight: 4.95lbsQuick View -
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$82.17Part No: 951
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$82.17These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
- 5-ton
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components heat-treated
- 3-1/2″, 7″ spread, center screw 9/16″ – 20″ x 6-3/8″
UPC: 047084009512
Shipping weight: 3.7lbsAlso available:
134 Two & Three Jaw Combination Puller, 4″ Spread
952 Two & Three Jaw Adjustable Combination Puller, 8″ SpreadQuick View -
Coil Spring Compressor
$82.00Part No: 510
Coil Spring Compressor
$82.00This tool removes and installs coil springs quickly and safely
- Compress coil springs on all passenger cars and pick-up trucks
- Instructions included
- Not for use with impact tools
This tool should not be used on unusually large coil springs which have a coil outside diameter larger than 5 5/8″ or a wire diameter exceeding 3/4″.
UPC: 047084005101
Shipping Weight: 3.25lbsQuick View -
Bearing Splitter, Medium
$81.77Part No: 509CV
Bearing Splitter, Medium
$81.77Designed to remove and pull bearings in tight applications. Can remove thin faced & cone shape gears and has a beveled edge that can be easily placed behind part to secure gripping surface.
- Capacity 3″ to 4-1/2″
- Split and separate bearings where puller jaws cannot be used
- Made from industrial strength steel
- 3 Ton Capacity
UPC: 047084005095
Shipping Weight: 4.29lbsQuick View -
13 PC Alternator Coupler Pulley (ADP) Kit
$81.66Part No: 753CV
13 PC Alternator Coupler Pulley (ADP) Kit
$81.66The 13 PC Alternator Coupler Pulley (ADP) Kit can be used to service both OWC (One-Way Clutch) and OAD (Overrunning Alternator Decoupler) style pulleys. OWC’s were first used in 1997 followed by the OAD in 1999. Today, more and more vehicle manufacturers are recognizing the performance gains achieved with these pulleys and have designed them into their belt drive systems.
- To remove these pulleys, the shaft coming from the alternator needs to be locked in place while the pulley is spun either clockwise or counterclockwise, depending on the manufacturer. The opposite would be used in the installation
- Covers most US Euro makes and models with both on and off vehicle applications included, but not limited to: Audi®, BMW®, Buick®, Cadillac®, Chevrolet®, Chrysler® Citroen®, Dodge®, Fiat®, Ford®, Honda®, Lexus®, Mercury®, Mercedes-Benz®, Pontiac®, Porsche®, Saturn®, Scion®, Toyota®, VW®.
- Eliminates the need to shop around for hard-to-find OWC and OAD tools
UPC: 047084007532
Shipping weight: 2.65lbsQuick View -
Universal Caliper Turn and Push-Back Tool
$80.00Part No: 727
Universal Caliper Turn and Push-Back Tool
$80.00The Universal Caliper/Alliper tool is designed to compress a wide range of brake calipers. Reverse the head to compress front brake calipers also. Forcing screw has a 3/8″ female drive to accept ratchets for additional push back force.
- Compresses any size brake caliper, from motorcycles, standard size cars, trucks and SUVs, and even 18 wheelers
- Use with a 3/8″ ratchet
- Can also perform front brake jobs by flipping the head around
- Eliminates need for sets with high piece counts
UPC: 047084007273
Shipping weight: 1.55lbsQuick View -
Serpentine Belt Tool Set
$80.00Part No: 738
Serpentine Belt Tool Set
$80.00- Designed to remove and install serpentine belts on vehicles with spring-loaded belt tensioners
- Eases removal and installation of serpentine belt
- Extension bar for hard to access areas
- Fits tensioner pulleys with 13mm-16mm, 18mm hex, or 3/8″ and 1/2″ square drives.
- For hard to access tensioners, there are 13mm and 15mm, 12-point wrenches built into the handle.
- 13mm, 14mm, and 15mm crows foot wrenches also included.
UPC: 047084007389
Shipping weight: 4.57lbsQuick View -
Bushing Driver Set
$80.00Part No: 504
Bushing Driver Set
$80.00Remove or install bushings from 3/8″ to 1-3/8″ in diameter found in cars, trucks, tractors, construction equipment, electric motors, and many other components containing bushings.
- Includes sixteen bushing adapters ranging from 3/8″ – 1-3/8″ large, medium, and small driver handles.
- Comes in a blow-molded storage case.
UPC: 047084005040
Shipping Weight: 3.1lbsQuick View -
Variable Pin Spanner Wrench
$79.00Part No: 752CV
Variable Pin Spanner Wrench
$79.00The universal design of this wrench ensures that it will fit on a wide variety of pulleys that feature holes or slots, including both crankshaft and camshaft pulleys.
- This versatile wrench is widely adjustable from 1-1/4″ to 5″
- Use with a 1/2″ drive ratchet or breaker bar.
- The tool accommodates the most common metric size pin configurations including:
- 3.5 mm Pin
- 4 mm Pin
- 4.5 mm Pin
- 5 mm Pin
- 6 mm Pin
- 7 mm Pin
- 10 mm Pin
UPC: 047084007525
Shipping Weight: 2.3lbs752 – Variable Pin Spanner Wrench Breakdown
Quick View -
6 PC Oil Filter Wrench Set with Holder
$75.00Part No: 99100CV
6 PC Oil Filter Wrench Set with Holder
$75.00- Features a swivel handle that allows user to get to filters in hard to reach areas
- Wide dimpled band securely grips filters without crushing
- Ergonomic cushioned rubber grip
- Heavy duty magnetic base holder for secure metal surface placement
- Locknut allows user to tighten or loosen swivel handle feature
- Sizes included:
- Part #99001: 2-1/4″-2-7/8″ (57-73MM)
- Part #99002: 2-9/16″-3-1/4″ (65-83MM)
- Part #99003: 2-61/64″-3-3/4″ (75-95MM)
- Part #99004: 3-5/8″-4-3/8″ (92-111MM)
- Part #99005: 3-15/16″-4-23/32″ (100-120MM)
- Part #99006: 4-23/32″-5-3/4″ (120-146MM)
UPC: 047084991008
Shipping weight: 6.31lbsQuick View -
Adjustable Bearing Pushing & Installer, Seal Driver
$75.00Part No: 506
Adjustable Bearing Pushing & Installer, Seal Driver
$75.00- All in one design eliminates the need for a driver and different size adapters
- Locking screw holds the adjustable jaws in place for one hand use
- Durable sturdy aluminum construction, equipped with a steel capped striker shaft handle
- 4-stepped jaws quickly adjust to accommodate bearing races and seals from .708” – 3.543” (18mnm – 90mm)
UPC: 047084005064
Shipping Weight: 2.15lbsQuick View -
Long Reach Harmonic Balancer and Pulley Installer
$75.00Part No: 38700
Long Reach Harmonic Balancer and Pulley Installer
$75.00The Long Reach Balancer – Pulley Installer is a kit for installing harmonic balancer pulleys on many popular late model Ford®, GM®, Dodge®, and Chrysler® vehicles with V6 and V8 engines that have recessed threads for the crank pulley bolt or utilize an underdrive pulley or both.
- Extra long reach tool kit for the installation of underdrive or oversized pulleys and applications with recessed threads on the crankshaft
- Traditional type balancer pulley installers will not work in many of these applications
- Includes four high quality long-reach threaded adapters and a universal nut that enables technicians install these pulleys with ease
UPC: 047084387009
Shipping weight: 3.7lbsQuick View
