Products
Showing 97–108 of 319 resultsSorted by price: low to high
-
18″ Urethane Cut Out Knife
$28.00Part No: 26
18″ Urethane Cut Out Knife
$28.00- This heavy duty windshield knife gives that extra reach to cut hardened urethane down to the dash line.
- Constructed of heavy duty steel and aluminum and a padded ergonomic handle.
- 18″ overall length.
- No. 356-1 Replacement Blade
UPC: 047084000267
Shipping Weight: .75lbsQuick View -
Constant Pressure Tube Cutter 3/16″ – 7/8″
$28.00Part No: 157
Constant Pressure Tube Cutter 3/16″ – 7/8″
$28.00The constant pressure tube cutter utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin walled steel tubing without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up then turn the cutter to until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter.
- Cuts a range of tubing sizes from 3/16″ to 7/8″
- Spring loaded tube cutter
- Replaceable blade, part #157-600
- Patented design
UPC: 047084001578
Shipping Weight: .4lbsQuick View -
2-In-1 S-Cam Brake Tool
$28.00Part No: 36700CV
2-In-1 S-Cam Brake Tool
$28.00The Cal-Van Tools 2-in-1 S-Cam Brake Tool offers technicians a more efficient method for changing brake shoes on an S-Cam drum brake assembly. The tool is comprised of a steel shaft with a U-shaped fork on one end to stretch the retaining spring so that both halves of the brake shoes are held together which enables the user to hook up the pin. An S-shaped device on the opposite end enables the user to position the brake shoes in a way that allows leverage for installation of the rollers. The hooked end pulls the brake shoes apart so that the rollers can be installed faster and more safely.
- Faster for changing brake shoes on S-cam drum brake assembly
- Steel shaft
UPC: 047084367001
Shipping weight: 1.1lbsQuick View -
Logic Light Circuit Tester
$28.00Part No: 81CV
Logic Light Circuit Tester
$28.00This self-powered Logic Light removes the guesswork when testing live and non-live 6V, 12V and 24V DC electrical systems. It is simple to use and has patented LED edge-lighting to clearly distinguish power or ground. Use it to test for poor grounding, broken wires, and blown fuses. Creates less draw than traditional test lights with incandescent bulbs, protecting your electrical system while you work.
- Patented, dual color LED edge-lighting illuminates the handle red when power has been detected and green when grounded
- Internal power source allows user to test live and non-live DC systems (battery included and replaceable)
- Save time by easily confirming a grounded circuit
- Tests for high and low voltages on all vehicle circuits
- Sonic welded back cap
- For use with 6V/12V/24V automotive electrical systems
UPC: 047084000816
Shipping Weight: 1lbQuick View -
Harmonic Balancer Puller
$28.03Part No: 189
Harmonic Balancer Puller
$28.03- Designed to pull balancers, vibration dampers, pulleys, and gears with tapped holes
- Fits most domestic and import vehicles
- Four slots in yoke allows tool to be used in both two and three hole applications.
- Removable, floating swivel prevents damage to shaft.
- Yoke is forged from high grade alloy steel and heat treated
- Metric and SAE bolts included
UPC: 047084001899
Shipping Weight: 2.3lbsQuick View -
Battery Terminal Clamp Spreader
$28.11Part No: 549CV
Battery Terminal Clamp Spreader
$28.11- Designed to both spread battery cable clamp and clean terminal in one swift operation.
- Forged and heat treated jaws.
- 7-1/2″ overall length.
UPC: 047084005491
Shipping Weight: .65lbQuick View -
Oil Filter Pliers
$28.49Part No: 297
Oil Filter Pliers
$28.49- Oil Filter Pliers fits filters with diameter of 2-3/4″ – 3-1/4″ (70mm-83mm)
- Pliers design features no-slip jaws with gripping teeth to easily remove stubborn spin-on oil filters.
UPC: 047084002971
Shipping Weight: 1.05lbsQuick View -
Oil Filter Pliers
$28.78Part No: 298
Oil Filter Pliers
$28.78- Oil Filter Pliers fits filters with diameter of 3-1/8″ – 3-5/8″ (79mm-92mm)
- Pliers design features no-slip jaws with gripping teeth to easily remove stubborn spin-on oil filters.
UPC: 047084002988
Shipping Weight: 1.2lbsQuick View -
Snap Ring Pliers- Straight
$28.97Part No: 49CV
Snap Ring Pliers- Straight
$28.97The U-joint snap ring pliers are designed to remove and replaced U-Joint snap rings, upholstery clips and a multitude of other removal tasks. The unique jaw allows you to grab snap rings on a flat surface and trim clips of all types without damaging them.
- Designed to remove and replace snap rings on universal joints on Hotchkiss drive shafts
- Can be used to remove plastic push pin retainers on several makes and models
- Designed to remove trim pads & insulation
- Unique jaw design allows the user to easily grab snap rings from a flat surface
- Great for removing interior clips and body panel fasteners
- Straight design
UPC: 047084000496
Shipping Weight: .75lbs49 Snap Ring Plier Straight Flyer
Also available:
48 Snap Ring Pliers – 75˚ OffsetQuick View -
The Grabber Serpentine Belt Tool
$29.00Part No: 734
The Grabber Serpentine Belt Tool
$29.00- Clamping jaw allows user to position serpentine belt without the belt slipping out of the tool.
- Tru-grip and long reach allows belt routing in tight access areas that would normally be difficult if not impossible.
- Body made of light-weight alloy steel for durability and strength.
- Ergonomic handle provides comfort and ease in use acting as an extension of the users hand.
- Patent Pending
UPC: 047084007341
Shipping weight: .95lbQuick View -
Stripped Hex Screw Removers, SAE
$29.00Part No: 342CV
Stripped Hex Screw Removers, SAE
$29.00- Perfect for removing stripped out hex screws.
- Reverse twist of the hex key allows for easy removal of stripped hex screws.
- Full range to remove most common sizes
UPC: 047084003428
Shipping Weight: 1.29lbsQuick View -
3 Pin Adjustable Brake Caliper Turn Back Tool
$29.00Part No: 726
3 Pin Adjustable Brake Caliper Turn Back Tool
$29.00This adapter allows you to rewind the pistons in brake calipers, and works by allowing the rotation of the piston at the same time as pushing the piston back into the caliper.
- Replaces larger kits containing up to 20 parts
- Rotates brake pistons back into the caliper on vehicles with self-adjusting parking breaks
- Use with a 3/8″ drive ratchet or breaker bar
- Fits most domestic and import vehicles
- Applications include: Alfa Romeo®, Audi®, Citroen®, Ford®, Honda®, Jaguar®, Land Rover®, Mazda®, Mercedes®, Mini®, Mitsubishi®, Nissan®, Lancer®, Toyota®, VW®, Volvo®
- 726 – 3 Pin Brake Rewind Tool
- Min: .75”
- Max: 1.6”
UPC: 047084007266
Shipping weight: .15lbAlso available:
723 – 2 and 3 Pin Adjustable Brake Caliper Turn Back Tool
724 – 2 and 3 Pin Adjustable Brake Caliper Turn Back Tool Set
725 – 2 Pin Adjustable Brake Caliper Turn Back ToolQuick View
